Alpine DVD-VIDEO CD- DVA-5205E User Manual

Size:
1.95 Mb
Download

Adjusting the parametric equalizer

Adjusting the parametric equalizer

Select “PARAMETRIC-EQ”under “Operating the digital audio processor (optional)” on page 40.

Use the “Joystick” to select the band to be set, then press “ENT”.

The band whose frequency is indicated in yellow can be adjusted. The parametric equalizer’s setting screen consists of two pages. Press “BAND” for at least 2 seconds to switch between pages 1 and 2.

ENT

ENT

V. SEL

A. PROC

BAND

Use the “Joystick” to select the band width (Q-FACT),then press “ENT”.

ENT

ENT

 

Use the “Joystick” to adjust the band width, then press “ENT”.

ENT

ENT

Use the “Joystick” to select the level (LV), then press “ENT”.

ENT

ENT

 

Use the “Joystick” to adjust the level, then press “ENT”.

ENT

ENT

Note: Press “RTN” to return to the previous screen.

Use the “Joystick” to adjust the frequency, then press “ENT”.

ENT

ENT

Press “A.PROC”

to close the V. SEL digital audio

processor screen

and return to the playback screen.

A. BAND

41

Adjusting the surround settings

ENT

BAND

RTN

V.OUT

A. PROC

BAND

Adjusting the surround settings

This adjustment is not possible when Dolby Digital or Pro Logic is turned on for the DVA5205E’s audio output.

Select “SURROUND” under “Operating the digital audio processor (optional)” on page 40.

Use the “Joystick” to select the surround mode, then press “ENT”.

There are six surround modes.

ENT

ENT

Press “ENT”.

 

The level (LV) value turns

 

yellow.

ENT

Use the “Joystick” to adjust the level (LV), then press “ENT”.

ENT

ENT

42

Storing the surround settings

Use the “Joystick” to select the time (echo time), then press “ENT”.

Use the “Joystick” to select “WRITE”, then press “ENT”.

ENT

ENT

 

 

ENT

 

 

 

 

ENT

Use the “Joystick” to adjust the time, then press “ENT”.

ENT

ENT

Note: Press “RTN” to return to the previous screen.

Press “A.PROC”

V. SEL

to close the digital audio processor screen

and return to the playback screen.

A. PROCBAND

Storing the

DVD Video CD

 

surround settings

CD

 

Select “PRIVATE-MEMORY”under “Operating the digital audio processor (optional)” on page 40.

Use the “Joystick” to select the memory location at which you want to store the settings (“PRI- VATE-MEMORY1” to “PRIVATEMEMORY 6”), then press “ENT”.

ENT

ENT

Note: Press “RTN” to return to the previous screen.

Press “A.PROC”

to close the

V. SEL

 

digital audio

A.

processor screen

BAND

 

and return to the play-

 

back screen.

 

43

Recalling the surround settings

ENT

BAND

RTN

V.OUT

A. PROC

BAND

Recalling the

DVD Video CD

 

surround settings

CD

 

Select “PRIVATE-MEMORY”under “Operating the digital audio processor (optional)” on page 40.

Use the “Joystick” to select the memory location you want to recall (“PRIVATE-MEMORY1” to“PRIVATE-MEMORY6”), then press “ENT”.

ENT

ENT

Note: Press “RTN” to return to the previous screen.

Press “A.PROC”

to close the V. SEL digital audio

processor screen

and return to the playback screen.

A. BAND

44

Adjusting the time compensation

Using the Pro Logic mode

Adjusting the

DVD

Video CD

Using the Pro

DVD

Video CD

 

 

time compensation

CD

Logic mode

 

CD

Select “TIME-CORRECTION”under “Operating the digital audio processor (optional)” on page 40.

Use the “Joystick” to select the speaker to be adjusted, then press “ENT”.

Select “DOLBY SURROUND MODE” under “Operating the digital audio processor (optional)” on page 40.

Use the “Joystick” to make the selection, then press “ENT”.

ENT

ENT

ENT

ENT

Use the “Joystick” to adjust the time, then press “ENT”.

ENT

ENT

Note: Press “RTN” to return to the previous screen.

Press “A.PROC”

to close the V. SEL digital audio

processor screen

and return to the playback screen.

A. PROCBAND

DOLBY DIGITAL

“DOLBY DIGITAL” is set automatically when the disc is Dolby Digital compatible and the DVD video player’s audio output setting is set to “AUTO”.

DOLBY PRO LOGIC

“DOLBY PRO LOGIC” or “OFF” can be selected when the disc is Dolby Pro Logic compatible and the DVD video player’s audio output setting is set to “LPCM”. When “OFF” is selected, the surround settings cannot be adjusted.

Note: Press “RTN” to return to the previous screen.

Press “A.PROC”

to close the

V. SEL

 

digital audio

A.

processor screen

BAND

 

and return to the play-

 

back screen.

 

45

ADJUST – Setting the speaker mode

ENT

BAND

RTN

V.OUT

A. PROC

BAND

ADJUST –

DVD Video CD

 

Setting the

CD

 

speaker mode

 

This adjustment cannot be made when

Dolby Pro Logic is set to “OFF”.

Select “ADJUST” under “Operating the digital audio processor (optional)” on page 40.

Use the “Joystick” to select the speaker to be set (“FRONT”, “CENTER” or “REAR”), then press “ENT”.

ENT

ENT

Use the “Joystick” to switch the mode.

ENT

FRONT

LARGE/SMALL

CENTER

OFF/LARGE/SMALL

REAR

OFF/LARGE/SMALL

Note: Press “RTN” to return to the previous screen.

46

ADJUST – Adjusting the acoustic image

Press “A.PROC”

to close the V. SEL digital audio

processor screen

and return to the playback screen.

ADJUST – Adjusting the acoustic image

A. PROCBAND

DVD Video CD

CD

This adjustment cannot be made when Dolby Pro Logic is set to “OFF”.

Select “ADJUST” under “Operating the digital audio processor (optional)” on page 40.

Use the “Joystick” to select “BIPHANTOM”, then press “ENT”.

ENT

ENT

Use the “Joystick” to select the mode (“ON” or “OFF”), then press “ENT”.

ENT

ENT

Use the “Joystick” to select the level item, then press “ENT”.

ENT

ENT

Use the “Joystick” to

adjust the level, then press “ENT”.

ENT

ENT

Note: Press “RTN” to return to the previous screen.

Press “A.PROC”

to close the

V. SEL

 

digital audio

A.

processor screen

BAND

and return to the play-

 

back screen.

 

Note: The“BI-PHANTOM”setting is automatically set to “OFF” when the center speaker is set to “OFF”.

47

ADJUST – Mixing the rear audio channels

ENT

BAND

RTN

V.OUT

A. PROC

BAND

ADJUST –

DVD Video CD

 

Mixing the rear

CD

 

audio channels

 

Use this function to mix the audio signals for the front to those output from the rear speakers.

Select “ADJUST” under “Operating the digital audio processor (optional)” on page 40.

Use the “Joystick” to

select “REAR MIX”, then press “ENT”.

ENT

ENT

Use the “Joystick” to select the mode (“ON” or “OFF”), then press “ENT”.

ENT

ENT

Note: The “REAR MIX” setting is automatically set to “OFF” when the rear speaker is set to “OFF”.

Use the “Joystick” to select the level item, then press “ENT”.

ENT

ENT

48

ADJUST – Center speaker time compensation

Use the “Joystick” to adjust the level, then press “ENT”.

ENT

ENT

Note: Press “RTN” to return to the previous screen.

Press “A.PROC”

to close the V. SEL digital audio

processor screen

and return to the playback screen.

A. PROCBAND

ADJUST –

DVD Video CD

 

CD

Center speaker time compensation

Compensation is not possible when the center speaker is set to “OFF”.

Select “ADJUST” under “Operating the digital audio processor (optional)” on page 40.

Use the “Joystick” to select “CENTER DELAY”, then press “ENT”.

ENT

ENT

Use the “Joystick” to adjust the level, then press “ENT”.

ENT

ENT

Note: Press “RTN” to return to the previous screen.

Press “A.PROC”

to close the V. SEL digital audio

processor screen

and return to the playback screen.

A. BAND

49

ADJUST – Rear speaker time compensation

ENT

BAND

RTN

V.OUT

A. PROC

BAND

ADJUST –

DVD Video CD

 

CD

Rear speaker time compensation

Compensation is not possible when the rear speakers are set to “OFF”.

Select “ADJUST” under “Operating the digital audio processor (optional)” on page 40.

Use the “Joystick” to select “REAR DELAY”, then press “ENT”.

ENT

ENT

Use the “Joystick” to adjust the level, then press “ENT”.

ENT

ENT

Note: Press “RTN” to return to the previous screen.

Press “A.PROC”

to close the V. SEL digital audio

processor screen

and return to the playback screen.

A. BAND

50