Alpine DVA-9965R User Manual

Size:
1.1 Mb
Download

FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/ PARA USO EN AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK

R

EN

RDS DVD-VideoTuner

DVA-9965R

DE

TM

DIGITAL VIDEO

• OWNER'S MANUAL

Please read before using this equipment.

FR

• BEDIENUNGSANLEITUNG

Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes.

• MODE D'EMPLOI

Veuillez lire avant d’utiliser cet appareil.

• MANUAL DE OPERACIÓN

Léalo antes de utilizar este equipo.

• ISTRUZIONI PER L’USO

Si prega di leggere prima di utilizzare il attrezzatura.

• ANVÄNDARHANDLEDNING

Innan du använder utrustningen bör du läsa igenom denna användarhandledning.

ES

IT

ALPINE ELECTRONICS MARKETING, INC.

ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.

ALPINE ITALIA S.p.A.

 

1-1-8Nishi Gotanda,

161-165Princes Highway, Hallam

Viale C. Colombo 8, 20090 Trezzano

 

Shinagawa-ku,

Victoria 3803, Australia

Sul Naviglio (MI), Italy

 

Tokyo 141-0031,Japan

Phone 03-8787-1200

Phone 02-484781

 

Phone 03-5496-8231

ALPINE ELECTRONICS GmbH

ALPINE ELECTRONICS DE ESPAÑA, S.A.

 

ALPINE ELECTRONICS OF AMERICA, INC.

 

Frankfurter Ring 117,

Portal de Gamarra 36, Pabellón, 32

 

19145 Gramercy Place, Torrance,

80807 München, Germany

01013 Vitoria (Alava)-APDO133, Spain

 

California 90501, U.S.A.

Phone 089-3242 640

Phone 945-283588

 

Phone 1-800-ALPINE-1(1-800-257-4631)

ALPINE ELECTRONICS OF U.K. LTD.

 

SE

ALPINE ELECTRONICS OF CANADA, INC.

ALPINE ELECTRONICS (BENELUX) GmbH

Alpine House

Leuvensesteenweg 510-B6,

 

777 Supertest Road, Toronto,

Fletchamstead Highway, Coventry CV4 9TW, U.K.

 

1930 Zaventem, Belgium

 

Ontario M3J 2M9, Canada

Phone 0870-3333 763

 

Phone 02-725-1315

 

Phone 1-800-ALPINE-1(1-800-257-4631)

 

 

ALPINE ELECTRONICS FRANCE S.A.R.L.

 

 

 

 

 

 

(RCS PONTOISE B 338 101 280)

 

 

 

98, Rue de la Belle Etoile, Z.I. Paris Nord Il,

 

 

 

B.P. 50016, 95945 Roissy Charles de Gaulle

 

 

 

Cedex, France

 

 

YAMAGATA Corporation

Phone 01-48638989

 

 

 

Designed by ALPINE Japan

 

2-6-34,Takashima,Nishi-ku,Yokohama,

 

 

 

Printed in Japan (Y)

 

Kanagawa, Japan

 

 

 

68-02065Z31-A

 

 

 

 

Contents

 

Operating Instructions

 

WARNING

 

WARNING ..................................................

3

CAUTION ...................................................

3

PRECAUTIONS .........................................

3

Discs playable on this unit ......................

5

About the GlideTouch™ Bar

 

Operation .......................................

7

Getting Started

 

Turning Power On and Off ...............................

8

Initial System Start-Up .....................................

8

Opening and Closing the Movable Display ......

8

Display Tilt Adjustment ....................................

8

Adjusting Volume .............................................

8

Detaching and Attaching the Front Panel .........

9

Radio

 

Listening to Radio .............................................

9

Manual Storing of Station Presets ..................

10

Automatic Memory of Station Presets ............

10

Tuning to Preset Stations ................................

10

Frequency Search Function ............................

10

RDS

 

Setting RDS Reception Mode and Receiving

 

RDS Stations ...............................................

11

Recalling Preset RDS Stations ........................

11

Receiving RDS Regional (Local) Stations .....

11

PI SEEK Setting ..............................................

12

Receiving Traffic Information ........................

12

PTY (Programme Type) Tuning .....................

12

Receiving Traffic Information While Playing

 

CD or Radio .................................................

12

Priority PTY (Programme Type) ....................

13

Displaying Radio Text ....................................

13

CD/MP3/WMA

 

Playback ..........................................................

14

Repeat Play .....................................................

15

M.I.X. (Random Play) ....................................

15

Scanning Programmes ....................................

16

Searching from CD Text .................................

16

File/Folder Name Search

 

(concerning MP3/WMA) ............................

16

About MP3/WMA ..........................................

16

DVD/Video CD

 

Playing DVD/Video CD .................................

18

Stopping Playback (PRE-STOP) ....................

18

Stopping Playback ..........................................

19

ENGLISH

Fast-forwarding/Fast-reversing .......................

19

Finding the Beginning of

 

Chapters or Tracks .......................................

19

Playing Still Frames (pausing) ........................

19

Forward/reverse frame-by-framePlayback ....

19

Slow Motion Playback ....................................

19

Searching by Title Number (DVD only) .........

19

Searching Directly by Chapter or Track

 

Number ........................................................

20

Chapter/Track/Title Repeat Playback .............

20

Switching the Audio Tracks ............................

20

Switching the Angle (DVD only) ...................

21

Switching the Subtitles (subtitle language)

 

(DVD only) ..................................................

21

Displaying the Disc Status (DVD only) ..........

21

Displaying the Disc Status (Video CD only) ...

21

GlideTouch bar Operation ...............................

22

Sound Setting

 

Adjusting Balance (Between Left and Right)/

 

Fader (Between Front and Rear)/Defeat ......

22

Selecting the EQ mode

 

(Factory settings) .........................................

23

Setting User's EQ mode ..................................

23

Adjusting and Storing the Parametric

 

Equalizer Curve ...........................................

23

Adjusting and Storing the Graphic

 

Equalizer Curve ...........................................

24

Recalling the Stored Equalizer Curve .............

24

Adjustable Range of each Band for

 

Parametric Equalizer ...................................

25

Adjustable Range of each Band for

 

Graphic Equalizer ........................................

25

About the Crossover .......................................

26

Adjusting and Storing the Crossover

 

Settings ........................................................

27

Recalling the Stored Crossover Settings .........

28

About Time Correction ...................................

28

Setting the Time Correction Unit ....................

29

Adjusting and Storing the Time Correction ....

29

Recalling the Stored Time Correction

 

Settings ........................................................

30

Setting the MX Mode .....................................

30

Other Functions

 

Displaying the Text .........................................

31

Blackout Mode On and Off .............................

32

Setting the Multicolour Illumination ..............

32

Rear DVD Function ........................................

32

Downloading the Wallpaper ............................

33

1-EN

DVD Setup

 

DVD Setup Operation .....................................

34

Setting the language ....................................

34

Setting the TV Screen ..................................

35

Setting the Country Code ............................

35

Setting the Rating Level (Parental Lock) ....

35

Setting the Digital Output ............................

36

Custom Setup

 

Custom Setup Operation .................................

37

Setting the CD Play Mode ...........................

37

Setting the Video CD Play Mode ................

37

Setting the Pause Mode ...............................

37

Setting the Downmix Mode .........................

37

SETUP

 

Setup Operation ..............................................

38

General Setting

 

Playing MP3/WMA Data ................................

38

Sound (Beep) Guide Function ........................

38

Changing the Sound (Beep) Guide Pattern .....

38

Turning Mute Mode On/Off ...........................

38

Setting Tone Defeat for External Devices .......

39

Setting the AUX Mode (V-Link) .....................

39

Setting the Digital Output ...............................

39

Setting the Digital Audio Processor ................

39

Tuner Setting

 

Adjusting Source Signal Levels ......................

39

Audio Setting

 

Subwoofer On and Off ....................................

39

Setting the Response Slope for the

 

High Range Speaker ....................................

39

Display Setting

 

Dimmer Control ..............................................

40

Setting the Display Dimmer ...........................

40

Changing the Display Colour .........................

40

Scroll Setting ...................................................

40

Scroll Type Setting ..........................................

40

Switching the Character Font .........................

40

Switching the Animation Display Type ..........

40

iPod™ Operation (Optional)

 

Playback ..........................................................

41

Searching for a desired Song ..........................

41

Searching by Playlist ...................................

41

Searching by artist name .............................

41

Searching by album name ...........................

42

Quick Search ...................................................

42

Random Play Shuffle (M.I.X.) ......................

42

Repeat Play .....................................................

43

Displaying the Text .........................................

43

Changer (Optional)

 

Controlling CD Changer (Optional) ...............

44

Playing MP3 Files with the CD Changer

 

(Optional) ....................................................

44

Multi-ChangerSelection (Optional) ...............

44

External Audio Processor (Optional)

Adjustment Procedure for Dolby Surround ....

45

Setting the Speakers ........................................

46

Set MX Mode of the External Audio

 

Processor .....................................................

46

X-OVERAdjustment ......................................

46

Performing Time Correction Manually (TCR)/

Phase Switching ..........................................

47

Calculating the Time Correction .................

47

Inputting the Time Correction .....................

47

Switching the Phase .....................................

48

Graphic Equalizer Adjustments ......................

48

Parametric Equalizer Adjustments ..................

48

Setting Bass Compressor ................................

49

Speaker Setup .................................................

49

Setting of Dolby Digital ..................................

50

Adjusting the speaker levels

 

(OUTPUT LEVEL) ..................................

50

Mixing bass sound to the rear channel

 

(REAR MIX) ............................................

50

Adjusting the acoustic image

 

(BI-PHANTOM) ......................................

50

Achieving powerful high volume sound

 

(LISTENING) ..........................................

51

Adjusting the DVD Level ...............................

51

Using the Pro Logic II Mode ..........................

51

Linear PCM Setting ........................................

52

Storing Settings in the Memory ......................

52

Getting out the Preset Memory .......................

52

Remote Control

 

Controls on Remote Control ...........................

53

When Using the Remote Control ....................

54

Battery Replacement .......................................

54

Information

 

About DVDs ...................................................

56

Terminology ....................................................

57

List of Language Codes ..................................

58

List of Country Codes .....................................

59

In Case of Difficulty .......................................

61

Specifications ..................................................

64

Installation and Connections

Warning ...........................................................

65

Caution ............................................................

65

Precautions ......................................................

65

Installation ......................................................

66

Connections ....................................................

68

System Example .............................................

70

2-EN

Operating Instructions

WARNING

WARNING

This symbol means important instructions. Failure to heed them can result in serious injury or death.

DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.

Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions.

Failure to do so may result in an accident.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISE WHILE DRIVING.

Failure to do so may result in an accident.

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident, fire or electric shock.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.

Failure to do so may result in fire or electric shock.

DO NOT BLOCK VENTS OR RADIATOR PANELS.

Doing so may cause heat to build up inside and may result in fire.

USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.

Use for other than its designed application may result in fire, electric shock or other injury.

DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS.

Doing so may result in personal injury or damage to the product.

CAUTION

This symbol means important instructions. Failure to heed them can result in injury or material property damage.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS.

Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Centre for repairing.

DO NOT MIX NEW BATTERIES WITH OLD BATTERIES. INSERT WITH THE CORRECT BATTERY POLARITY.

When inserting the batteries, be sure to observe proper polarity (+ and –)as instructed. Rupture or chemical leakage from the battery may cause fire or personal injury.

KEEP FINGERS AWAY WHILE THE MOTORIZED FRONT PANEL OR MOVING MONITOR IS IN MOTION.

Failure to do so may result in personal injury or damage to the product.

PRECAUTIONS

Product Cleaning

Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.

Temperature

Be sure the temperature inside the vehicle is between +60°C (+140°F) and –10°C(+14°F) before turning your unit on.

Moisture Condensation

You may notice the CD playback sound wavering due to condensation. If this happens, remove the disc from the player and wait about an hour for the moisture to evaporate.

Damaged Disc

Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism.

Maintenance

If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing.

3-EN

Never Attempt the Following

Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism.

Do not attempt to insert a disc into the unit when the unit power is off.

Correct Handling

Do not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface. Do not affix tape, paper, or gummed labels to the disc. Do not write on the disc.

CORRECT

Inserting Discs

Your player accepts only one disc at a time for playback. Do not attempt to load more than one disc.

Make sure the label side is facing up when you insert the disc. “Error” will be displayed on your player if you insert a disc incorrectly. If “Error” continues to be displayed even though the disc has been inserted correctly, push the RESET switch with a pointed object such as a ballpoint pen.

Playing a disc while driving on a very bumpy road may result in skips, but this will not scratch the disc or damage the player.

New Discs

As a protective measure to prevent the CD from jamming, “Error” will be displayed if discs with irregular surface are inserted or inserted incorrectly. When a new disc is inserted into the player and ejected after initial loading, using your finger, feel around the inside of the centre hole and outside edge of the disc. If you feel any small bumps or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub the inside edge of the hole and outside edge of the disc with a ballpoint pen or other such instrument, then insert the disc again.

Centre Hole

Centre Hole

New

 

 

 

 

Disc

Bumps

 

Outside

 

 

(Bumps)

INCORRECT

CORRECT

Disc Cleaning

Fingerprints, dust, or soil on the surface of the disc could cause the CD player to skip. For routine cleaning, wipe the playing surface with a clean, soft cloth from the centre of the disc to the outer edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc.

Disc Accessories

There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause the disc to be out of standard specifications and may create operational problems. We recommend not using these accessories on discs played in Alpine CD players.

Irregular Shaped Discs

Be sure to use round shape discs only for this unit and never use

Transparent Sheet Disc Stabilizer

any special shape discs.

 

Use of special shape discs may cause damage to the mechanism.

 

Installation Location

Make sure the DVA-9965Rwill not be installed in a location subjected to:

Direct sun and heat

High humidity and water

Excessive dust

Excessive vibrations

4-EN

Discs playable on this unit

Playable Discs

The discs listed below can be played on this unit.

 

Mark (logo)

Recorded

Disc size

Max.

 

 

content

 

playing time

 

 

 

 

 

 

 

 

 

One-sided

 

 

 

 

disc

 

 

 

 

Approx.

 

 

 

 

4 hours

 

 

 

12 cm*

 

 

 

 

Two-sided

 

 

 

 

 

 

 

 

disc

 

 

Audio

 

Approx.

 

 

 

8 hours

 

 

+

 

 

 

 

 

DVD

 

Video

 

 

 

 

 

Video

 

(Moving

 

One-sided

 

 

pictures)

 

 

 

 

disc

 

 

 

 

 

 

 

 

Approx.

 

 

 

 

80 Minutes

 

 

 

8 cm

 

 

 

 

Two-sided

 

 

 

 

 

 

 

 

disc

 

 

 

 

Approx.

 

 

 

 

160 Minutes

 

 

 

 

 

 

 

Audio

12 cm

Approx.

 

 

74 Minutes

 

 

 

 

 

+

 

Video

DIGITAL VIDEO

 

 

Video

 

 

 

 

 

CD

 

(Moving

 

Approx.

 

 

pictures)

8 cm

 

VIDEO CD

 

 

20 Minutes

 

 

 

 

 

 

 

 

 

 

 

 

12 cm

Approx.

 

 

 

74 Minutes

 

 

 

 

Music

 

Audio

 

 

 

8 cm

Approx.

CD

 

 

 

 

 

(CD single)

20 Minutes

 

 

 

 

 

* Two-layerDVD disc compatible

Discs that cannot be played

DVD-ROMs,DVD-RAMs,DVD + Rs, DVD + RWs,CD-ROMs(excluding MP3/WMA files), photo CDs, etc.

DVD region number (playable region number)

This DVD player will play back any disc whose region number is 2 (or All). DVDs with a region number other than those listed below, cannot be played on this DVD player.

2 ALL

Video CDs

This DVD head unit is compatible with playback control (PBC) compatible video CDs (version 2.0).

“PBC” is a function by which you can use menu screens recorded on the disc to find the scene you want to watch and view various types of information in dialogue style.

Using compact discs (CD/CD-R/CD-RW)

If you use unspecified compact discs, correct performance cannot be guaranteed.

You can play CD-Rs(CD-Recordable)/CD-RWs(CDReWritable) which have been recorded only on audio devices. You can also playCD-Rs/CD-RWscontaining MP3/WMA formatted audio files.

Some of the following discs may not be played on this unit: Flawed discs, discs with fingerprints, discs exposed to extreme temperatures or sunlight (e.g., left in the car or this unit), discs recorded under unstable conditions, discs on which a recording failed or a re-recordingwas attempted,copy-protectedCDs which do not conform to the audio CD industry standard.

Use discs with MP3/WMA files written in a format compliant with ISO9660 level 1 or level 2. For details, see pages 16 and 17.

To customers using CD-R/CD-RW

If a CD-R/CD-RWcannot be played back, make sure the last recording session was closed (finalized).

Finalize the CD-R/CD-RWif necessary, and attempt playback again.

Tips for making your own CDs

The DVA-9965Rplays DVD Video, Video CD, Audio CD and has a built in MP3/WMA decoder.

The following information is designed to help you create your own music CDs (either Audio CD or MP3/WMA encoded CD-R/RW files).

What is the difference between an Audio and MP3/WMA CD?

An Audio CD is the same format as the commercial CDs you buy in the store (also known as CD-DA).MP3(MPEG-1Audio Layer 3)/ WMA (Windows Media Audio) is a data file that uses a compression scheme to reduce the size of the music file.*

Hybrid Audio CD and Data (MP3/WMA) CD-R/RWdiscs:

The DVA-9965Rcan read either sector on the disc. ChooseCD-DAto play the CD audio section or MP3/WMA to play the MP3/WMA section.*

Continued

5-EN

Multisession CD-R/RW:

Once a recording has been stopped, this is considered as one session. If the disc is not closed (finalized), additional data may be added. Once this additional data has been recorded, this becomes a “multisession” CD. The DVA-9965Rcan only read multisession DATA Formatted discs (MP3/WMA files - Not Audio CD files).

Properly formatted MP3/WMA Discs:

Use ISO9660 formatting to insure proper playback. You may use standard ISO naming Level 1 (8.3 DOS standard), Level 2 (32 characters) or Joliet (Windows or Macintosh long filenames) file naming conventions*.

*Please consult the Owner’s manual for additional information.

On handling compact discs (CD/CD-R/CD-RW)

Do not touch the surface.

Do not expose the disc to direct sunlight.

Do not affix stickers or labels.

Clean the disc when it is dusty.

Make sure that the disc is smooth and flat.

Do not use commercially available disc accessories.

Do not leave the disc in the car or the unit for a long time. Never expose the disc to direct sunlight.

Heat and humidity may damage the disc and you may not be able to play it again.

Using DVD-Rs/DVD-RWs

This unit is compatible only with discs recorded in the DVDVideo mode. Discs recorded in the DVD-VRmode cannot be played back.

Note that discs not finalized (processed to enable to play on playback-onlyDVD players) cannot be played on this DVD player.

Some discs may not play back, depending on the recording device. (This unit has a copy protection function. Discs copied illegally will not be played back. Some files recorded by a software using an improper recording system may be recognized as illegally copied.)

In the following cases, the disc may not play on this unit: discs recorded by certain DVD recorders, certain irregular discs, flawed discs, dirty discs, when the pickup lens of this DVD player is dirty, or when moisture condensation has occurred inside the unit.

Be sure to follow all cautions included with your DVD-Rs/DVD-RWsdiscs.

Do not put stickers, seals, or tape on the label side of DVD-Rs/DVD-RWs.

Compared to the regular discs, DVD-Rs/DVD-RWsare more affected by heat, moisture, and direct sunlight. If left in a car, etc., damage may occur and it might not play on this unit.

Disc terminology

Title

If titles are programmed for the DVD, these are the largest units of division of the information recorded on the disc.

Chapter

Each Title may also be divided into smaller divisions, called chapters. These can be specific scenes or musical selections.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic” and the double-Dsymbol are trademarks of Dolby Laboratories.

“DTS” and “DTS2.0 + Digital Out” are trademarks of Digital Theater Systems, inc.

Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Apple, the Apple logo and iPod are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.

“MPEG Layer-3audio coding technology licensed from Fraunhofer llS and Thomson”

“Supply of this product only conveys a license for private, noncommercial use and does not convey a license nor imply any right to use this product in any commercial(i.e. revenue-generation)real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/ or other networks or in other electronic content distribution systems, such aspay-audiooraudio-on-demandapplications. An independent license for such use is required. For details, please visit http://www. mp3licensing.com.”

6-EN

About the GlideTouch™ Bar Operation

1 Touch or press the desired position on the GlideTouch bar.

Function guide

ON OFF

GlideTouch bar

Press any one of the 6 positions on the GlideTouch bar to which a function has been assigned in the guide display. For example, to select ON, press the GlideTouch bar directly below where ON is indicated in the guide display. The manual expresses this as follows: “Change the setting by pressing the GlideTouch bar below either the ON or OFF function indicators.”

2 Move your finger on the GlideTouch bar to the left or right.

GlideTouch bar

Place your finger on the GlideTouch bar and slide it gently to the left or right. Items or lists in the display will change as you move your finger across the GlideTouch bar.

To select items on the following page, scroll the page as follows:

Place and hold your finger on either the side of the GlideTouch bar to which the following page will be found for at least 1 second. When scrolling the page to the left, place and hold your finger on the left side of the GlideTouch bar.

When scrolling the page to the right, place and hold your finger on the right side of the GlideTouch bar.

7-EN

Getting Started

SOURCE/

 

 

POWER

RESET

Rotary encoder

MENU

GlideTouch bar

c

Turning Power On and Off

Press SOURCE/POWER to turn on the unit.

The unit can be turned on by pressing any other button except eject c and.

Press and hold SOURCE/POWER for at least 2 seconds to turn off the unit.

• The first time power is turned on, the volume will start from level 12.

Initial System Start-Up

Be sure to press the RESET switch when using the unit for the first time, after installing the CD changer, after changing the car battery, etc.

1 Turn off the unit power.

2 Press RESET with a ballpoint pen or similar pointed object.

Opening and Closing the Movable Display

Press c.

The movable display will open.

To close the movable display, press c again.

The movable display will close.

Do not apply shock to the movable display when it is open as it may result in malfunction of the unit.

The display may be dim during low temperature and immediately after turning on the power. The brightness will return to normal as time elapses.

The display will stop at the set tilt angle when closing.

Caution

Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.

Display Tilt Adjustment

The movable display may be adjusted to 3 different tilt angles depending upon user preference.

1 Press MENU.

2 Select TILT Adjust by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under TILT Adjust.

3 Touch the GlideTouch bar under(UP) or

(DOWN) to adjust the display tilt angle.

• Selecting(RETURN) will return to the previous screen.

Movable display

4 After setting, press and hold MENU for at least 2 seconds to return to normal mode.

The adjusted tilt angle of the display is stored in memory. There is no need to re-adjustthe tilt angle when the power is turned back on.

If MENU is pressed while adjusting or setting items in the MENU mode, the unit will return to the previous selection screen.

By pressing the GlideTouch bar under RETURN in the MENU mode, the unit returns to the normal mode.

Caution

Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.

Adjusting Volume

Turn the Rotary encoder until the desired sound is obtained.

• While in the MENU mode, the volume cannot be adjusted.

8-EN

Detaching and Attaching the Front Panel

Detaching

1 Turn off the unit power.

2 Press(Release) at the upper left side until the front panel pops out.

3 Grasp the left side of the front panel and pull it out.

The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel). This is not a malfunction.

To protect the front panel, place it in the supplied carrying case.

Attaching

1 Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit.

2 Push the left side of the front panel until it locks firmly into the main unit.

2

1

Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit.

Attach the front panel carefully, holding the sides of the front panel to avoid pushing buttons by mistake.

Radio

SOURCE/

 

 

TUNE/

 

POWER

 

 

A.ME BAND

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

g

GlideTouch bar

f FUNC.

Listening to Radio

1 Press SOURCE/POWER until a radio frequency appears in the display.

2 Press BAND repeatedly until the desired radio band is displayed.

FM-1FM-2FM-3→ MW → LW →FM-1

3 Press TUNE/A.ME to select the tuning mode.

DX (Distance mode) → LOCAL (Local mode) →

MANUAL (Manual mode) → DX

• The initial mode is Distance mode.

Distance mode:

Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning).

Local mode:

Only strong stations will be automatically tuned in (Automatic Seek Tuning).

Manual mode:

The frequency is manually tuned in steps (Manual tuning).

4 Pressg orf to tune in the desired station.

Holding down g or f will change the frequency continuously.

The ST indicator appears on the display when a stereo FM station is tuned in.

With the DVA-9965R,you can tune the radio with theGlideTouch bar. PressFUNC. to select the source operation mode. Press theGlideTouch bar under the desired function shown in the function guide display.

9-EN