Alpine DVA-5205 User Manual

Size:
1.88 Mb
Download

R

DVA-5205

DVD/VIDEO CD/

CD PLAYER

• OWNER’S MANUAL (Page 2-67)

Please read this manualto maximize your enjoyment of the outstanding performance and feature capabilities of the equipment, then retain the manual for future reference.

• MODE D’EMPLOI (Page 72-137)

Veuillez lire ce mode d’emploi pour tirer pleinement profit des excellentes performances et fonctions de cet appareil, et conservez-lepour toute référence future.

• MANUAL DE OPERACION (Página 138-??)Lea este manual, por favor, para disfrutar al máximo de las excepcionales prestaciones y posibilidades funcionales que ofrece el equipo, luego guarde el manual para usarlo como referencia en el futuro.

DIGITAL VIDEO

Precautions

This symbol means important instructions.

Warning

Failure to heed them can result in serious injury or death.

DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electric shock.

KEEP SMALL OBJECTS SUCH AS BATTERY OUT OF THE REACH OF CHILDREN. Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do so may result in fire or electric shock.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.

DO NOT WATCH VIDEO WHILE DRIVING. Watching the video may distract the driver from looking ahead of the vehicle and cause an accident.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISE WHILE DRIVING. Failure to do so may result in an accident.

USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS. Use for other than its designed application may result in fire, electric shock or other injury.

2

Precautions

This symbol means important instructions.

Caution

Failure to heed them can result in injury or property damage.

DO NOT BLOCK VENTS OR RADIATOR PANELS. Doing so may cause heat to build up inside and may result in fire.

DO NOT MIX NEW BATTERIES WITH OLD BATTERIES. INSERT WITH THE CORRECT BATTERY POLARITY. When inserting the batteries, be sure to observe proper polarity (+ and –) as instructed. Rupture or chemical leakage from the battery may cause fire or personal injury.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Center for repairing.

3

Precautions

Temperature

Be sure the temperature inside the vehicle is between +60°C (+140°F) and–10°C(+14°F) before turning your unit on.

Moisture Condensation

You may notice the CD playback sound wavering due to condensation. If this happens, remove the disc from the player and wait about an hour for the moisture to evaporate.

Damaged Disc

Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism.

Maintenance

If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing.

Never Attempt the Following

Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism.

Do not attempt to insert a disc into the unit when the unit power is off.

Inserting Discs

Your player accepts only one disc at a time for playback. Do not attempt to load more than one disc.

Make sure the label side is facing up when you insert the disc. Your player will automatically eject any disc that is inserted incorrectly.

Playing a disc while driving on a very bumpy road may result in skips, but this will not scratch the disc or damage the player.

Irregular Shaped Discs

Make sure the discs you use in this unit do not have any irregularities. The outer and inner edges should be round and smooth. Use of irregularly shaped discs may cause damage to the mechanism.

New Discs

As a protective measure to prevent the CD from jamming, the CD player will automatically eject discs with irregular surfaces or inserted incorrectly. When a new disc is inserted into the player and ejected after initial loading, using your finger, feel around the inside of the centre hole and outside edge of the disc. If you feel any small bumps or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub the inside edge of the hole and outside edge of the disc with a ball-pointpen or other such instrument, then insert the disc again.

Installation Location

Make sure the DVA-5205will not be installed in a location subjected to:

Direct sun and heat

High humidity and water

Excessive dust

Excessive vibrations

4

CONTENTS

Precautions

Warnings and Cautions ...............................

2

Contents ......................................................

5

Quick Guide

About DVDs .................................................

6

Discs playable on this DVD player ...............

7

When using remote control .........................

8

Loading and unloading discs .......................

9

Turning the power on and off .....................

10

Switching between NTSC and

 

PAL configuration .......................................

11

Adjusting the volume .................................

11

Playing discs ..............................................

12

Stopping playback .....................................

13

Fast-forwarding/fast-reversing ...................

14

Finding the beginnings of chapters or tracks ....

14

Playing still frames (pausing) .....................

15

Frame-by-frameplayback ..........................

15

Slow motion playback ................................

15

Convenient Functions

Searching by title number ..........................

16

Searching directly by chapter or track number ..

17

Searching by elapsed time ........................

18

Chapter/track/title repeat playback ............

19

Switching the audio language ...................

19

Switching the angle ...................................

20

Switching the subtitles (subtitle language) ......

20

Displaying the subtitles ..............................

21

Displaying the disc status ..........................

22

Video Output ON/OFF ...............................

23

SET UP

 

Changing the Default Settings

Changing the default settings (setup) ........

24

Changing the language setting ..................

24

Changing the TV screen settings ..............

26

Changing the country code setting ............

27

Setting the rating level (parental lock) .......

28

Changing the downsampling setting ..........

30

Changing the digital output setting ............

32

Changing the LED indicator setting ...........

34

Custom setting –

 

Changing the Closed Caption setting ....................

35

Custom setting – Changing the Ai-NETsettings ....

36

Custom setting –

 

Changing the H.U. Control settings ........................

38

Digital Audio Processor (Optional)

Operating the digital audio processor (optional) ....

40

Adjusting the parametric equalizer ............

41

Adjusting the surround settings .................

42

Storing the surround settings ....................

43

Recalling the surround settings .................

44

Adjusting the time compensation ..............

45

Using the Pro Logic mode .........................

45

ADJUST – Setting the speaker mode ........

46

ADJUST – Adjusting the acoustic image ...

47

ADJUST – Mixing the rear audio channels .......

48

ADJUST – Center speaker time compensation .....

49

ADJUST – Rear speaker time compensation ...

50

ADJUST – Achieving powerful sound at low volumes ..

51

ADJUST – Adjusting the speaker level ......

52

MODE – Adjusting the volume, fader and balance .....

53

MODE – Adjusting the subwoofer .............

54

MODE – Turning the defeat function on and off .....

55

Operating from the Head Unit (CDA-7965)

Operating from the head unit .....................

56

Operating from the head unit’s remote control unit .....

58

Others

Terminology ...............................................

60

List of language codes ..............................

61

In case of difficulty .....................................

62

Specifications ............................................

63

Functions of remote control unit buttons ...

64

5

About DVDs

About DVDs

Music CDs and DVDs have grooves (tracks) in which the digital data is recorded. The data is represented as microscopic pits recorded into the track – these pits are read by a laser beam to play the disc. On DVDs, the density of the tracks and pits is twice that of CDs, so DVDs can contain more data in less space.

CD-ROMs

Minimum bit

 

 

Track pitch -

length

1.2 mm

 

- 0.9 μm

 

1.6 μm

DVDs

Minimum bit

 

 

length -

0.6 mm

Track pitch -

0.9 μm

 

0.6 mm

0.74 μm

Moreover, DVDs offer a variety of functions.

• Multiple audio* (page 19)

Movies can be recorded in up to eight languages. The desired language can be selected from the remote control unit.

Subtitles function* (page 20)

Movies can include subtitles in up to 32 languages. The desired subtitle language can be selected from the remote control unit.

Multi angle function* (page 20)

When the DVD contains a movie shot from multiple angles, the desired angle can be selected from the remote control unit.

• Multi story function*

With this function, a single movie includes various story lines. You can select different story lines to view various versions of the same movie.

Operation differs from disc to disc. Story line selection screens including instructions appear during the movie. Just follow the instructions.

Note: * The functions audio languages, subtitle languages, angles, etc., differ from disc to disc. For details, refer to the disc’s instructions.

A 12 cm disc can contain one movie or about four hours of music.

In addition, DVDs provide sharp picture quality with vivid colors thanks to a horizontal resolution of over 500 lines (compared to less than

300 for VHS tape). With the addition of an optional, digital audio processor (PXA-H510),you can recreate the power and presence of a movie theater with Dolby Digital5.1-channelSurround.

6

Discs playable on this DVD player

Discs playable on this DVD player

• Playable discs

The discs listed below can be played on this

DVD player. Other discs cannot be played.

 

Mark (logo)

Recorded

Disc size

Max.

 

 

content

 

playing time

 

 

 

 

 

 

 

 

 

One-sided

 

 

 

 

disc

 

 

 

 

Approx.

 

 

 

 

4 hours

 

 

 

12 cm*

 

 

 

 

Two-sided

 

 

 

 

 

 

 

 

disc

 

 

Audio

 

Approx.

 

 

 

8 hours

 

 

+

 

 

 

 

 

DVD

 

Video

 

 

 

 

Video

 

(Moving

 

One-sided

 

 

pictures)

 

 

 

 

disc

 

 

 

 

 

 

 

 

Approx.

 

 

 

 

80 Minutes

 

 

 

8 cm

 

 

 

 

One-sided

 

 

 

 

 

 

 

 

disc

 

 

 

 

Approx.

 

 

 

 

160 Minutes

 

 

 

 

 

 

 

Audio

12 cm

Approx.

 

 

74 Minutes

 

 

 

 

 

+

 

Video

DIGITAL VIDEO

 

 

Video

 

 

CD

 

(Moving

 

Approx.

 

 

pictures)

8 cm

 

VIDEO CD

 

 

20 Minutes

 

 

 

 

 

 

 

 

 

 

 

 

12 cm

Approx.

 

 

 

74 Minutes

 

 

 

 

Music

 

Audio

 

 

 

8 cm

Approx.

CD

 

 

 

 

 

(CD single)

20 Minutes

 

 

 

 

 

*Two-layerDVD disc compatible

Discs that cannot not be played

DVD-ROMs,DVD-R/DVD-RAMs,CD-ROMs,CD-R/CD-RWs,photo CDs, etc.

DVD region number (playable region number)

This DVD player will play back any disc whose region number is 1 (or All). DVDs with a region number other than those listed below, cannot be played on this DVD player.

1ALL

Video CDs

This DVD player is compatible with playback control (PBC) compatible video CDs (version

2.0).

“PBC” is a function by which you can use menu screens recorded on the disc to find the scene you want to watch and view various types of information in dialog style.

• Disc terminology

Title

If titles are programmed for the DVD, these are the largest unit of division of the information recorded on the disc.

Chapter

Each Title may also be divided into smaller divisions called Chapters. These can be specific scenes or musical selections.

*This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering of disassembly is prohibited.

*Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-Dsymbol are trademarks of Dolby Laboratories.

*“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, inc.

7

When using remote control

When using remote control

• Changing Switch

To operate the DVD Player shift the changing switch to the “DVD” side. Operate while viewing the blue characters on the remote control unit.

DVD / AUDIO

Switching to “AUDIO” makes it possible to operate Alpine audio products as well. Operate while viewing the white characters on the remote control unit.

Point the remote control at the remote sensor within about 2 meter.

It may not be possible to operate the remote control unit if the remote control sensor is exposed to direct sunlight.

The remote control is a small, light weight precision equipment. To avoid damage, early battery wearing, operations error and deterioration of operation feeling, take care of the followings.

-Do not apply any shock.

-Do not put in a trouser pocket.

-Keep free from splashing of a drink, moisture and dusts.

-Do not place in direct sunshine.

Replacing the batteries

Opening the battery cover

Push on the cover and slide it as indicated by the arrows then the cover will be removed.

Replacing the battery

Remove the old batteries. Insert new ones matching the (+) and (–)polarities as shown in the diagram inside the remote control.

-

+

+

-

Closing the cover

Push the cover in the arrow direction until a click is heard.

Note: Use two AA size batteries.

Warning

DO NOT OPERATE THE EQUIPMENT OR LOOK AT THE SCREEN WHILE DRIVING THE VEHICLE.

Operating the equipment may distract the driver from looking ahead of the vehicle and cause accident. Always stop the vehicle in a safe location before operating this equipment.

8

Loading and unloading discs

Loading and unloading discs

DVD Video CD

CD

Turn on the power before loading and unloading discs. (Refer to page 10 “Turning the power on and off”.)

Loading discs

Press the door in gently then slide it downwards.

Close the door.

Be sure to close the door to prevent dust from getting inside.

POWER

OPEN

DVD

Insert the disc with the side containing words or diagrams facing upwards.

Once the disc is partially inserted, it is drawn in automatically. Playback starts.

DVD

POWER

OPEN

DVD

Unloading discs

Press the door in gently then slide it downwards. The disc is automatically ejected part way.

If the disc is not removed, it is automatically drawn back into the player after a while.

Notes:

If the ignition key is on ACC or ON, a disc can be inserted even when the power is OFF. The power then goes ON automatically.

Never insert a navigation map disc. If inserted it may cause a failure.

For two-sidedDVDs, play one side of the disc to the end, then unload the disc, turn it over and reload it to play the other side.

Refer to the indications on the disc (“Side 1”/”Side 2”).

Never insert map discs for navigation purposes as they could damage the equipment.

If wrong disc, upside-downdiscs or dirty discs have been inserted, “DISC ERROR” is displayed. Open the door and remove the disc.

POWER

OPEN

DVD

Note: If the ignition key is on ACC or ON, a disc can be removed even when the power is OFF. After removing the disc, the power goes OFF again automatically.

Caution

Never close the door while the disc

 

is being unloaded. Doing so could

 

scratch the disc or damage the

 

player.

9

Turning the power on and off

OL V

DN

VOL

UP

Turning the power on and off

Press “POWER”.

The power turns on.

POWER

 

NTSC/PAL

Caution

When connected with an Alpine

 

head unit

 

If the DVA-5205is connected to

 

anything other than the CVA-1005/

 

IVA-C800,the default DVD setting

 

must be changed. See page 36,

 

“Custom setting – Changing the Ai-

 

NET settings” to change the SETUP

 

to CD mode before using it.

POWER NTSC/PAL

To turn the power off, press “POWER” again.

 

Notes:

 

• With this unit connected to an Ai-NETcompatible

Play Position Memory Function

head unit, there will be about a 3 second delay

during power-upfrom the remote control. This is

• Even if you turn power off or switch the

caused by the systems communications being

Ignition Key to OFF during playback or

carried out by the various components and is not

change the video source, playback will

a defect.

continue from the point where playback

• When connected with an Ai-NETcompatible head

stopped when the power is turned ON

unit, the power cannot be turned off from the

again.

remote control unit. Turn off the DVA-5205’s

The play position memory is released if

power by switching the head unit’s source. For

the disc is removed or the Reset switch

details, refer to “Operating from the head unit”

(page 56).

is pressed.

 

 

 

• Reading this manual

 

Tips

Stopping playback

These indicate the discs for which

Stopping

DVD

the function can be used.

Video CD

 

CD

playback

 

 

DVD ...DVDs

Press the stop button during playback to stop playback. That position is stored in the memory.

Press “L ” during playback.

CHG

Video CD ...Video CDs

CD ...Music CDs

• Using the PRE-STOPfunction

When the PRE-STOPfunction is used, the Tips position at which playback is stopped is stored in

the memory, and playback resumes from that position.

Press “ L ” once during playback.

“PRE-STOP”is displayed.

CHG

Press : in thePRE-STOPmode.

Playback starts from the position at which it was stopped.

This indicates supplementary explanation of operation of this system.

10