Alpine CDE-9827RR User Manual

Size:
645.2 Kb
Download

FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/ PARA USO EN AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK

R

EN

FM/MW/LW/RDS CD Receiver

CDE-9828RBCDE-9827RCDE-9827RMCDE-9827RR

DE

• OWNER'S MANUAL

Please read before using this equipment.

• BEDIENUNGSANLEITUNG

Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes.

• MODE D'EMPLOI

Veuillez lire avant d’utiliser cet appareil.

• MANUAL DE OPERACIÓN

Léalo antes de utilizar este equipo.

• ISTRUZIONI PER L’USO

Si prega di leggere prima di utilizzare il attrezzatura.

• ANVÄNDARHANDLEDNING

Innan du använder utrustningen bör du läsa igenom denna användarhandledning.

FR

ES

IT

ALPINE ELECTRONICS MARKETING, INC.

ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.

ALPINE ELECTRONICS FRANCE S.A.R.L.

 

1-1-8Nishi Gotanda,

6-8Fiveways Boulevarde Keysborough,

(RCS PONTOISE B 338 101 280)

 

Shinagawa-ku,

Victoria 3173, Australia

98, Rue de la Belle Etoile, Z.I. Paris Nord Il,

 

Tokyo 141-0031,Japan

Phone 03-9769-0000

B.P. 50016, 95945 Roissy Charles de Gaulle

 

Phone 03-5496-8231

ALPINE ELECTRONICS GmbH

Cedex, France

SE

ALPINE ELECTRONICS OF AMERICA, INC.

Phone 01-48638989

Frankfurter Ring 117,

 

19145 Gramercy Place, Torrance,

80807 München, Germany

ALPINE ITALIA S.p.A.

 

California 90501, U.S.A.

Phone 089-3242 640

Viale C. Colombo 8, 20090 Trezzano

 

Phone 1-800-ALPINE-1(1-800-257-4631)

ALPINE ELECTRONICS OF U.K. LTD.

Sul Naviglio (MI), Italy

 

ALPINE ELECTRONICS OF CANADA, INC.

Phone 02-484781

 

Alpine House

 

 

7300 Warden Ave., Suite 203, Markham,

Fletchamstead Highway, Coventry CV4 9TW, U.K.

ALPINE ELECTRONICS DE ESPAÑA, S.A.

 

Ontario L3R 9Z6, Canada

Phone 0870-3333 763

Portal de Gamarra 36, Pabellón, 32

 

Phone 1-800-ALPINE-1(1-800-257-4631)

 

01013 Vitoria (Alava)-APDO133, Spain

 

 

 

Phone 945-283588

 

 

Designed by ALPINE Japan

Meiyi Printing Factory, Dalian, China

Printed in China (Y)

No. 28 Chang Qing Street, Xi Gang District, Dalian, China

68P02294K95-O

Contents

 

Operating Instructions

 

WARNING

 

WARNING ..................................................

2

CAUTION ...................................................

2

PRECAUTIONS .........................................

2

Getting Started

 

Turning Power On and Off ...............................

5

Detaching and Attaching the Front Panel .........

5

Initial System Start-Up .....................................

5

Adjusting Volume .............................................

5

Radio

 

Listening to Radio .............................................

6

Manual Storing of Station Presets ....................

6

Automatic Memory of Station Presets ..............

6

Tuning to Preset Stations ..................................

6

RDS

 

Setting RDS Reception Mode and Receiving

 

RDS Stations .................................................

7

Recalling Preset RDS Stations ..........................

7

Receiving RDS Regional (Local) Stations .......

7

PI SEEK Setting................................................

8

Receiving Traffic Information ..........................

8

PTY (Programme Type) Tuning .......................

8

Receiving Traffic Information While Playing

 

CD or Radio ...................................................

9

Priority News ....................................................

9

Displaying Radio Text ......................................

9

CD/MP3/WMA

 

Playback ..........................................................

10

Playing back a playlist ....................................

10

Repeat Play .....................................................

11

M.I.X. (Random Play) ....................................

11

Scanning Programmes ....................................

11

Searching from CD Text .................................

11

File/Folder Name Search

 

(concerning MP3/WMA) ..............................

12

Quick Search ...................................................

12

About MP3/WMA ..........................................

12

ENGLISH

Sound Setting

 

Adjusting Balance (Between Left and Right)/

 

Fader (Between Front and Rear)/Defeat......

14

Setting the Bass Control .................................

14

Setting the Treble Control ...............................

15

Setting the Bass Type ......................................

15

Setting the MX Mode .....................................

15

Other Functions

 

Displaying the Title/Text.................................

16

Titling Discs ....................................................

17

Erasing Disc Title............................................

17

SETUP

 

Sound Customizing

 

Adjusting Source Signal Levels ......................

18

Switching the Tuner Mode ..............................

18

Subwoofer On and Off ....................................

18

Visual Customizing

 

Scroll Setting...................................................

18

MP3/WMA

 

Playing MP3/WMA Data................................

19

External Device

 

Connecting to an External Amplifier ..............

19

Information

 

In Case of Difficulty .......................................

19

Specifications ..................................................

21

Installation and Connections

Warning ...........................................................

22

Caution ............................................................

22

Precautions ......................................................

22

Installation ......................................................

23

Connections ......................................................

24

Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and /or other countries.

1-EN

Operating Instructions

WARNING

WARNING

This symbol means important instructions. Failure to heed them can result in serious injury or death.

DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.

Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISE WHILE DRIVING.

Failure to do so may result in an accident.

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident, fire or electric shock.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.

Failure to do so may result in fire or electric shock.

DO NOT BLOCK VENTS OR RADIATOR PANELS.

Doing so may cause heat to build up inside and may result in fire.

USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.

Use for other than its designed application may result in fire, electric shock or other injury.

DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS.

Doing so may result in personal injury or damage to the product.

CAUTION

This symbol means important instructions. Failure to heed them can result in injury or material property damage.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS.

Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Centre for repairing.

PRECAUTIONS

Product Cleaning

Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.

Temperature

Be sure the temperature inside the vehicle is between +60°C (+140°F) and –10°C(+14°F) before turning your unit on.

Moisture Condensation

You may notice the CD playback sound wavering due to condensation. If this happens, remove the disc from the player and wait about an hour for the moisture to evaporate.

Damaged Disc

Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism.

Maintenance

If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing.

2-EN

PRECAUTIONS

Never Attempt the Following

Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism.

Do not attempt to insert a disc into the unit when the unit power is off.

Inserting Discs

Your player accepts only one disc at a time for playback. Do not attempt to load more than one disc.

Make sure the label side is facing up when you insert the disc. Your player will automatically eject any disc that is inserted incorrectly. If the player continues to eject a correctly inserted disc, push the RESET switch with a pointed object such as a ballpoint pen.

Playing a disc while driving on a very bumpy road may result in skips, but this will not scratch the disc or damage the player.

New Discs

As a protective measure to prevent the CD from jamming, the CD player will automatically eject discs with irregular surfaces or inserted incorrectly. When a new disc is inserted into the player and ejected after initial loading, using your finger, feel around the inside of the centre hole and outside edge of the disc. If you feel any small bumps or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub the inside edge of the hole and outside edge of the disc with a ballpoint pen or other such instrument, then insert the disc again.

Centre Hole

Centre Hole

New

 

 

Disc

Bumps

 

Outside

 

 

(Bumps)

Irregular Shaped Discs

Be sure to use round shape discs only for this unit and never use any special shape discs.

Use of special shape discs may cause damage to the mechanism.

Installation Location

Make sure the CDE-9828RB/CDE-9827R/CDE-9827RM/CDE-9827RR will not be installed in a location subjected to:

Direct sun and heat

High humidity and water

Excessive dust

Excessive vibrations

Correct Handling

Do not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface. Do not affix tape, paper, or gummed labels to the disc. Do not write on the disc.

CORRECT

INCORRECT CORRECT

Disc Cleaning

Fingerprints, dust, or soil on the surface of the disc could cause the CD player to skip. For routine cleaning, wipe the playing surface with a clean, soft cloth from the centre of the disc to the outer edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc.

Disc Accessories

There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause the disc to be out of standard specifications and may create operational problems. We recommend not using these accessories on discs played in Alpine CD players.

Transparent Sheet Disc Stabilizer

Continued

3-EN

On handling Compact Discs (CD/CD-R/CD-RW)

Do not touch the surface.

Do not expose the disc to direct sunlight.

Do not affix stickers or labels.

Clean the disc when it is dusty.

Make sure that there are no bumps around the disc.

Do not use commercially available disc accessories.

Do not leave the disc in the car or the unit for a long time. Never expose the disc to direct sunlight. Heat and humidity may damage the CD and you may not be able to play it again.

To customers using CD-R/CD-RW

If a CD-R/CD-RWcannot be played back, make sure the last recording session was closed (finalized).

Finalize the CD-R/CD-RWif necessary, and attempt playback again.

About media that can be played.

Use only compact discs with the label side showing the CD logo marks below.

If you use unspecified compact discs, correct performance cannot be guaranteed.

You can play CD-Rs(CD-Recordable)/CD-RWs(CDReWritable) which have been recorded only on audio devices. You can also playCD-Rs/CD-RWscontaining MP3/WMA formatted audio files.

Some of the following CDs may not play on this unit: Flawed CDs, CDs with fingerprints, CDs exposed to extreme temperatures or sunlight (e.g., left in the car or this unit), CDs recorded under unstable conditions, CDs on which a recording failed or a re-recordingwas attempted, copyprotected CDs which do not conform to the audio CD industry standard.

Use discs with MP3/WMA files written in a format compatible with this unit. For details, see pages 12-13.

4-EN

Getting Started

SOURCE/

 

POWER

Rotary encoder

Turning Power On and Off

Press SOURCE/POWER to turn on the unit.

The unit can be turned on by pressing any other button except eject c.

Press and hold SOURCE/POWER for at least 2 seconds to turn off the unit.

• The first time power is turned on, the volume will start from level 12.

Detaching and Attaching the Front Panel

Detaching

1 Turn off the unit power.

2 Press(Release) at the upper left side until the front panel pops out.

3 Grasp the left side of the front panel and pull it out.

Initial System Start-Up

Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc.

1 Turn off the unit power.

2 Remove the detachable front panel.

3 Press RESET with a ballpoint pen or similar pointed object.

1

RESET switch

Adjusting Volume

Turn the Rotary encoder until the desired sound is obtained.

Connectable to Remote Control Interface Box

You can operate this unit from the vehicle's control unit when an Alpine Remote Control Interface Box (optional) is connected. For details, contact your Alpine dealer.

The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel.) This is not a malfunction.

To protect the front panel, place it in the supplied carrying case.

Attaching

1 Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit.

2 Push the left side of the front panel until it locks firmly into the main unit.

2

1

Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit.

Attach the front panel carefully, holding the sides of the front panel to avoid pushing buttons by mistake..

5-EN

Radio

SOURCE/ TUNE/

POWER A.ME BAND Rotary encoder SEARCH/Q.S.

g f

F/SETUP Preset buttons

 

(1 through 6)

Automatic Memory of Station Presets

1 Press BAND repeatedly until the desired radio band is displayed.

2 Press and hold TUNE/A.ME for at least 2 seconds.

The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into buttons 1 to 6 in order of signal strength.

When the automatic memory has been completed, the tuner goes to the station stored in preset location no. 1.

If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began.

Listening to Radio

1 Press SOURCE/POWER until a radio frequency appears in the display.

2 Press BAND repeatedly until the desired radio band is displayed.

F1 (FM1) →F2 (FM2) →F3 (FM3) →M (MW) →L (LW) →F1 (FM1)

3 Press TUNE/A.ME to select the tuning mode.

DX SEEK (Distance mode) → SEEK (Local mode) → OFF (Manual mode) → DX SEEK

• The initial mode is Distance mode.

Distance mode:

Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning).

Local mode:

Only strong stations will be automatically tuned in (Automatic Seek Tuning).

Manual mode:

The frequency is manually tuned in steps (Manual tuning).

4 Pressgorfto tune in the desired station.

Holding down gor fwill change the frequency continuously.

The ST indicator appears on the display when a stereo FM station is tuned in.

Manual Storing of Station Presets

1 Select the radio band and tune in a desired radio station you wish to store in the preset memory.

2 Press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) that you want to store the station on.

The selected station is stored.

The display shows the band, preset no. and station frequency memorized.

A total of 30 stations can be stored in the preset memory (6 stations for each band; FM1, FM2, FM3, MW and LW).

If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station.

If the “FUNC” indicator is illuminated, turn off the indicator by pressing F/SETUP, then you can perform the operation.

Tuning to Preset Stations

1 Press BAND repeatedly until the desired band is displayed.

2 Press any one of the station preset buttons (1 through 6) that has your desired radio station in memory.

The display shows the band, preset number and frequency of the station selected.

If the “FUNC” indicator is illuminated, turn off the indicator by pressing F/SETUP, then you can perform the operation.

6-EN

RDS

BAND

g f T.INFO F/SETUP 1/AF 2/NEWS 3/PTY DISP/

TITLE

Setting RDS Reception Mode and Receiving

RDS Stations

The RDS (Radio Data System) is a radio information system using the 57 kHz subcarrier of regular FM broadcast. The RDS allows you to receive a variety of information such as traffic information, station names, and to automatically re-tuneto a stronger transmitter that is broadcasting the same programme.

1 Press F/SETUP so that the “FUNC” indicator lights up.

2 Press 1/AF to activate the RDS mode.

3 Pressgorfto tune in the desired RDS station.

4 Press 1/AF again to deactivate the RDS mode.

5 Press F/SETUP to activate the normal mode. The “FUNC” indicator goes out.

The RDS digital data includes the following:

PI

Programme Identification

PS

Programme Service Name

AF

List of Alternative Frequencies

TP

Traffic Programme

TA

Traffic Announcement

PTY

Programme Type

EON

Enhanced Other Networks

Recalling Preset RDS Stations

1 Press F/SETUP so that the “FUNC” indicator lights up.

2 Press 1/AF to activate the RDS mode.

3 Press F/SETUP to activate the normal mode. The “FUNC” indicator goes out.

4 Make sure that the “FUNC” indicator light goes out, then press the preset button in which your desired RDS station is preset.

If the preset station's signal is weak, the unit automatically searches and tunes to a stronger station in the AF (Alternative Frequencies) list.

5 If the preset station and the stations in the AF list cannot be received:

When the PI SEEK setting is on (refer to “PI SEEK Setting” on page 8), the unit searches again for a station in the PI (Programme Identification) list.

If there are still no stations receivable in the area, the unit displays the frequency of the preset station and the preset no. disappears.

If the signal level of the Regional (Local) station being tuned becomes too weak to receive, press the same preset button to tune in a Regional station in other district.

For presetting the RDS stations, refer to the Radio Operation section. The RDS stations can be preset in the F1, F2 and F3 bands only.

Receiving RDS Regional (Local) Stations

1 Press and hold F/SETUP for at least 2 seconds to / activate the setting mode.

2 Pressgorfto select the REG (Regional) mode.

3 Press BAND to turn on or off the REG (Regional) mode.

In the REG OFF mode, the unit automatically keeps receiving the related local RDS station.

4 Press F/SETUP to deactivate the setting mode.

7-EN

Press BAND to toggle the mode between “PISK ON” and “PISK OFF.”
Press F/SETUP to set the selected mode.

PI SEEK Setting

1 Press and hold F/SETUP for at least 2 seconds.

2 Pressgorfto select “PISK.”

3

4

Receiving Traffic Information

1 Press T.INFO so that the “T.INFO” indicator lights up.

2 Pressgorfto select your desired traffic information station.

When a traffic information station is tuned in, the “TP” indicator lights up.

Traffic information is heard only when it is being broadcast. If traffic information is not being broadcast, the unit is set in the standby mode. When a traffic information broadcast begins, the unit automatically receives it and the display shows “TRF-INFO”for a few seconds and returns to the PS display.

When the traffic information broadcast is over, the unit will automatically set in the standby mode.

If the traffic information broadcast signal falls below a certain level, the unit remains in the receiving mode for 1 minute. If the signal remains below a certain level for over 1 minute, the “T.INFO” indicator blinks.

If you do not want to listen to the traffic information being received, lightly press T.INFO to skip that traffic information message. The T.INFO mode will remain in the ON position to receive the next traffic information message.

If the volume level is changed while receiving traffic information, the changed volume level will be memorized. When traffic information is received next time, the volume level will be automatically adjusted to the level memorized.

In the T.INFO mode, the SEEK tuning selects only the TP stations.

PTY (Programme Type) Tuning

1 Press F/SETUP so that the “FUNC” indicator lights up.

2 Press 3/PTY to activate the PTY mode, while the unit is in Radio (FM receiving) mode.

The Programme Type of the station being currently received will be displayed for 5 seconds.

If there is no receivable PTY broadcast, “NO PTY” will be displayed for 5 seconds.

If no RDS station can be received, the display shows “NO PTY.”

If no operation is performed within 5 seconds after pressing 3/PTY, the PTY mode will be automatically cancelled.

3 Pressgandfwithin 5 seconds after activating the PTY mode to choose the desired programme type while the PTY (programme type) is being displayed.

Each press scrolls the programme type by one.

LIGHT M ↔ CLASSICS ↔ OTHER M

4 Press 3/PTY within 5 seconds after selecting the programme type to start searching for a station in the selected programme type.

The chosen programme type display blinks during searching and lights when a station is found.

If no PTY station is found, “NO PTY” will be displayed for 5 seconds.

5 Press F/SETUP to activate the normal mode. The “FUNC” indicator goes out.

Operate the unit while the “FUNC” indicator lights up. If no operation is performed within 5 seconds, the “FUNC” indicator goes out.

8-EN

Receiving Traffic Information While Playing CD or Radio

1 Press T.INFO so that the “T.INFO” indicator lights up.

2 Pressgandfto select a traffic information station if necessary.

When a traffic information broadcast starts, the unit automatically mutes the CD player/changer or the regular FM broadcast.

When the traffic information broadcast finishes, the unit automatically returns to the original source play before the traffic information broadcast began.

When traffic information stations cannot be received:

In the tuner mode:

When the TP signal can no longer be received for over 1 minute, the “T.INFO” indicator blinks.

In the CD mode:

When the TP signal can no longer be received, the traffic information station of another frequency will be selected automatically.

The receiver is equipped with the EON (Enhanced Other Networks) function in order to keep track of additional alternate frequencies to the AF list. The “EON” indicator lights up while an RDS EON station is being received. If the station being received does not broadcast the traffic information, the receiver automatically tunes in the related station that broadcasts the traffic information when it occurs.

3 Press T.INFO to deactivate the Traffic Information mode.

The “T.INFO” indicator goes out.

Priority News

This function allows you to preset to give priority to the News programme. You will never miss the News programme as the unit automatically gives priority to the News programme whenever it begins broadcasting, and interrupts the programme you are currently listening. This feature is functional when your unit is set to a mode other than the LW and MW modes.

1 Press F/SETUP so that the “FUNC” indicator lights up while the unit is in Radio (FM receiving) mode.

2 Press 2/NEWS to activate the PRIORITY NEWS mode.

The “NEWS” indicator appears in the display.

To disable the PRIORITY NEWS function, press 2/NEWS.

In the PRIORITY NEWS function, unlike in the T.INFO function, the volume does not increase automatically.

3 Press F/SETUP to activate the normal mode, while the unit is in Radio (FM receiving) mode.

The “FUNC” indicator light goes out.

Displaying Radio Text

Text messages from a radio station can be displayed.

1 Press DISP/TITLE while receiving FM in the radio mode to select the Radio Text display.

The display will change every time the button is pressed.

PS (Programme Service Name) → Radio Text → FREQUENCY → PS (Programme Service Name)

The display shows “WAITING” for a few seconds, then starts scrolling the text message.

If there is no receivable text message or the unit cannot receive a text message properly, the display shows “NO TEXT.”

9-EN