R |
CDA-7977
FM/AM CD Player
EN
CDA-7876 CDA-7875 CDA-7873
FM/AM CD Receiver
FR
ES
• OWNER'S MANUAL
Please read before using this equipment. |
|
• MODE D'EMPLOI |
ES |
Veuillez lire avant d'utiliser cet appareil. |
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
IT
|
|
|
|
|
|
|
|
|
|
|
|
ALPINE ELECTRONICS, INC. |
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. |
ALPINE ELECTRONICS FRANCE S.A.R.L. |
|
||||||||
Tokyo office: 1-1-8 Nishi Gotanda, |
6-8 Fiveways Boulevarde Keysborough, |
(RCS PONTOISE B 338 101 280) |
|
||||||||
Shinagawa-ku, |
|
|
|
|
Victoria 3173, Australia |
98, Rue De La Belle Etoile, Z.I. Paris Nord Il |
|
||||
Tokyo 141-8501, Japan |
|
|
|
|
Tel.: (03) 9769-0000 |
B.P. 50016 F-95945, Roissy, Charles De Gaulle |
|
||||
Tel.: (03) 3494-1101 |
|
|
|
ALPINE ELECTRONICS GmbH |
Cedex, France |
|
|||||
ALPINE ELECTRONICS OF AMERICA, INC. |
|
|
|
Tel.: 01-48 63 89 89 |
|
||||||
Kreuzerkamp 7-11 40878 Ratingen, Germany |
SE |
||||||||||
|
|
||||||||||
19145 Gramercy Place, Torrance, |
|
|
|
|
Tel.: 02102-45 50 |
ALPINE ELECTRONICS OF U.K., LTD. |
|||||
California 90501, U.S.A. |
|
|
|
|
ALPINE ITALIA S.p.A. |
13 Tanners Drive, Blakelands, Milton Keynes |
|
||||
Tel.: 1-800-ALPINE-1 (1-800-257-4631) |
|
|
|
|
MK14 5BU, U.K. |
|
|||||
Via C. Colombo 8, 20090 Trezzano Sul Naviglio |
|
||||||||||
|
Tel.: 01908-61 15 56 |
|
|||||||||
ALPINE ELECTRONICS OF CANADA, INC. |
|
|
|
|
|
|
MI, Italy |
|
|||
|
|
|
|
|
|
ALPINE ELECTRONICS DE ESPAÑA, S.A. |
|
||||
Suite 203, 7300 Warden Ave. Markham, |
|
|
|
|
Tel.: 02-48 47 81 |
|
|||||
Ontario L3R 9Z6, Canada |
|
|
|
|
|
|
|
Portal De Gamarra 36, Pabellón 32 |
|
||
Tel.: 1-800-ALPINE-1 (1-800-257-4631) |
|
|
|
|
|
|
|
01013 Vitoria (Alava)-Apdo. 133, Spain |
|
||
|
|
|
|
|
|
|
|
Tel.: 34-45-283588 |
|
||
Dalian Ikemiya Printing Co., Ltd. |
Designed by ALPINE Japan |
4 Jin Zhou Street Economic & Technical Development |
Printed in China (Y) |
Dalian China |
68P01434K28-O |
CD changer for CDA-7977/ CDA-7876/CDA-7875/CDA-7873 Changeur CD pour CDA-7977/ CDA-7876/CDA-7875/CDA-7873 Cambiador de CD para CDA-7977/ CDA-7876/CDA-7875/CDA-7873
CHA-S624
CD changer for CDA-7977/ CDA-7876/CDA-7875/CDA-7873 Changeur CD pour CDA-7977/ CDA-7876/CDA-7875/CDA-7873 Cambiador de CD para CDA-7977/ CDA-7876/CDA-7875/CDA-7873
You cannot connect to CDA-7977/ CDA-7876/CDA-7875/CDA-7873. Il est impossible de se raccorder au CDA-7977/CDA-7876/CDA-7875/ CDA-7873.
No es posible conectarlo a CDA-7977/ CDA-7876/CDA-7875/CDA-7873.
CHA-1214
CHM-S620
Alpine CD Changers Give You More!
More musical selections, more versatility, more convenience.
An Alpine CD Changer adds more musical choices to your sound system. All models except CHM-S620 can be controlled from Alpine head units and deliver excellent sound quality. The CHA-S624 is a highperformance 6-disc changer with a new M DAC, Ai-NET compatibility, Optical Digital Output, 150 Disc Title Memory and CD TEXT. The CHA-1214 Ai-NET model holds 12 discs, and the CHM-S620 M-Bus model is a super-compact 6-disc changer.
Changeurs de CD Alpine : vous avez le choix!
Plus de sélections musicales, plus de souplesse, plus de confort.
Un changeur de CD Alpine permet d'augmenter la plage des sélections musicales de votre système embarqué. Tous les modèles sauf le modèle CHM-S620 peuvent être contrôlés à partir des autoradios Alpine et offrent une excellente qualité audio. Le modèle CHA-S624 est un changeur 6 disques ultra performant compatible Ai-NET et équipé d'un convertisseur N/A standard, d'une sortie optique numérique, d'une mémoire d'une capacité de 150 titres et de la fonction CD TEXT. Le modèle CHA-1214 Ai-NET peut contenir 12 disques. Le modèle CHM-S620 M-Bus est un changeur 6 disques super compact.
¡Los cambiadores Alpine de CD le ofrecen más!
Más selecciones musicales, más versatilidad y más ventajas.
Un cambiador Alpine de CD añade más opciones musicales a su equipo de sonido. Todos los modelos excepto el modelo CHM-S620 pueden controlarse desde las unidades principales de Alpine y proporcionar un sonido de calidad excepcional. El modelo CHA-S624 es un cambiador de 6 discos de alto rendimiento con el nuevo DAC "M" y compatibilidad con Ai-NET, salida digital óptica, memoria de títulos de 150 discos y TEXTO CD. El modelo CHA-1214 Ai-NET admite 12 discos y el modelo CHM-S620 Bus-M es un cambiador de 6 discos y tamaño reducido.
Contents |
|
Operating Instructions |
|
WARNING |
|
WARNING .................................................. |
2 |
CAUTION ................................................... |
2 |
PRECAUTIONS ......................................... |
2 |
Basic Operation |
|
Detaching the Front Panel ................................. |
4 |
Attaching the Front Panel ................................. |
4 |
Initial System Start-Up ..................................... |
4 |
Turning Power On and Off ............................... |
4 |
Display Angle Adjustment ................................ |
5 |
Adjusting Volume/Balance (Between Left and |
|
Right)/Fader (Between Front and Rear) ........ |
5 |
Selecting BBE Mode ........................................ |
5 |
Audio Mute Function ........................................ |
5 |
Displaying Time ................................................ |
5 |
Setting Time ...................................................... |
6 |
Changing Lighting Color (CDA-7876 only) ..... |
6 |
Dimmer Control ................................................ |
6 |
Subwoofer On and Off ...................................... |
6 |
Sound (Beep) Guide Function .......................... |
7 |
Turning Mute Mode On/Off .............................. |
7 |
CD Text Scroll Setting ...................................... |
7 |
Setting the AUX Mode (V-Link) ....................... |
8 |
Demonstration ................................................... |
8 |
Setting the Bass Control ................................... |
9 |
Setting the Treble Control ................................. |
9 |
Adjusting the built in Crossover ....................... |
9 |
Setting Bass Forward ...................................... |
10 |
Defeat .............................................................. |
10 |
Switching the Tuner Mode .............................. |
10 |
Blackout Mode On and Off (CDA-7977 |
|
only) ............................................................. |
11 |
Switching the Display Modes (CDA-7977/ |
|
CDA-7876 only) .......................................... |
11 |
Changing the Audio Level Display Pattern |
|
(CDA-7875/CDA-7873 only) ...................... |
11 |
Displaying the Title/Text ................................. |
12 |
Titling Discs/Stations ...................................... |
13 |
Searching for Titled Discs/Titled Stations ...... |
13 |
Erasing Disc Title/Station Title ....................... |
13 |
ENGLISH
Radio Operation |
|
Manual Tuning ................................................ |
14 |
Automatic Seek Tuning .................................. |
14 |
Manual Storing of Station Presets .................. |
15 |
Automatic Memory of Station Presets ............ |
15 |
Tuning to Preset Stations ................................ |
15 |
CD Player Operation |
|
Opening and Closing the Movable display ..... |
16 |
Playback .......................................................... |
16 |
Music Sensor (Skip) ........................................ |
17 |
Fast Forward and Backward ........................... |
17 |
Repeat Play ..................................................... |
17 |
M.I.X. (Random Play) .................................... |
17 |
Scanning Programs ......................................... |
17 |
Controlling CD Changer (Optional) ............... |
18 |
Multi-Changer Selection ................................. |
19 |
XM Radio Operation |
|
Receiving XM Channels with the XM Receiver |
|
(Optional) .................................................... |
20 |
Checking the XM Radio ID Number .............. |
21 |
Storing XM Channel Presets ........................... |
21 |
Receiving Stored XM Channels ...................... |
21 |
Category Search .............................................. |
22 |
Changing the Display ...................................... |
22 |
Remote Control Operation |
|
(CDA-7977/CDA-7876/CDA-7875 only)
Controls on Remote Control ........................... |
23 |
Battery Replacement ....................................... |
24 |
Information |
|
In Case of Difficulty ....................................... |
25 |
Specifications .................................................. |
27 |
Installation and Connections
Warning ........................................................... |
28 |
Caution ............................................................ |
28 |
Precautions ...................................................... |
28 |
Installation ...................................................... |
29 |
Connections .................................................... |
30 |
LIMITED WARRANTY
1-EN
WARNING
WARNING
This symbol means important instructions. Failure to heed them can result in serious injury or death.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISE WHILE DRIVING.
Failure to do so may result in an accident.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead of the vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed, consult a physician immediately.
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.
Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V
APPLICATIONS.
Use for other than its designed application may result in fire, electric shock or other injury.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
CAUTION
This symbol means important instructions. Failure to heed them can result in injury or material property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Center for repairing.
DO NOT MIX NEW BATTERIES WITH OLD BATTERIES. INSERT WITH THE CORRECT BATTERY POLARITY.
When inserting the batteries, be sure to observe proper polarity (+ and –) as instructed. Rupture or chemical leakage from the battery may cause fire or personal injury.
KEEP FINGERS AWAY WHILE THE MOTORIZED FRONT PANEL OR MOVING MONITOR IS IN MOTION.
Failure to do so may result in personal injury or damage to the product.
PRECAUTIONS
Temperature
Be sure the temperature inside the vehicle is between +60°C (+140°F) and –10°C (+14°F) before turning your unit on.
Moisture Condensation
You may notice the CD playback sound wavering due to condensation. If this happens, remove the disc from the player and wait about an hour for the moisture to evaporate.
Damaged Disc
Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism.
Maintenance
If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing.
2-EN
Never Attempt the Following
Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power is off.
Inserting Discs
Your player accepts only one disc at a time for playback. Do not attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc. Your player will automatically eject any disc that is inserted incorrectly. If the player continues to eject a correctly inserted disc, push the RESET switch with a pointed object such as a ballpoint pen.
Playing a disc while driving on a very bumpy road may result in skips, but this will not scratch the disc or damage the player.
New Discs
As a protective measure to prevent the CD from jamming, the CD player will automatically eject discs with irregular surfaces or inserted incorrectly. When a new disc is inserted into the player and ejected after initial loading, using your finger, feel around the inside of the centre hole and outside edge of the disc. If you feel any small bumps or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub the inside edge of the hole and outside edge of the disc with a ballpoint pen or other such instrument, then insert the disc again.
Center |
Center |
New |
Hole |
Hole |
Disc |
Bumps |
|
Outside |
|
|
|
|
|
(Bumps) |
Irregular Shaped Discs
Be sure to use round shape discs only for this unit and never use any special shape discs.
Use of special shape discs may cause damage to the mechanism.
Installation Location
Make sure the CDA-7977/CDA-7876/CDA-7875/CDA- 7873 will not be installed in a location subjected to:
•Direct sun and heat
•High humidity and water
•Excessive dust
•Excessive vibrations
Correct Handling
Do not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface. Do not affix tape, paper, or gummed labels to the disc. Do not write on the disc.
CORRECT
INCORRECT |
CORRECT |
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could cause the CD player to skip. For routine cleaning, wipe the playing surface with a clean, soft cloth from the centre of the disc to the outer edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc.
Disc Accessories
There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause the disc to be out of standard specifications and may create operational problems. We recommend not using these accessories on discs played in Alpine CD players.
Transparent Sheet |
Disc Stabilizer |
3-EN
Basic Operation
|
|
|
|
|
POWER |
RESET |
MUTE |
||||
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MODE/BBE/ |
CLK |
Audio Control
Detaching the Front Panel
1 Press and hold the POWER button for more than 3 seconds to turn off the power.
2 Press the 
(Release) button at upper left side until the front panel pops out.
3 Grasp the left side of the front panel and pull it out.
NOTES
•The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel.) This is not a malfunction.
•To protect the front panel, place it in the supplied carrying case.
Attaching the Front Panel
1 First, insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit.
2 Push the left side of the front panel until it locks firmly into the main unit.
2 |
1 |
NOTE
Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit.
ANGLE 89
•Controllable with Remote Control (CDA-7873 only)
This unit can be controlled with an optional Alpine remote control. For details, consult your Alpine dealer.
Point the optional remote control transmitter at the remote control sensor.
Remote control sensor
Initial System Start-Up
Immediately after installing or applying power to the unit, it should be initialized. Press the RESET switch with a ballpoint pen or any other pointed object.
Turning Power On and Off
1 Press the POWER button to turn on the unit.
NOTE
The unit can be turned on by pressing any other button except the eject c and CLK/TITLE button.
The volume level gradually increases to the previous level you were listening to before the unit was turned off. Press and hold the POWER button for at least 3 seconds to turn off the unit.
NOTE
The first time power is turned on, the volume will start from level 12 and the unit will be in the tuner mode with BBE on.
4-EN
Display Angle Adjustment |
|
Selecting BBE Mode |
Movable display
The movable display may be adjusted to 3 different angles depending upon user preference.
1 Press the ANGLE 89 button to adjust the angle of the movable display.
NOTES
•The display will close a half minute after the ignition key is turned to the OFF position.
•The adjusted angle of the display is stored in memory. There is no need to re-adjust the angle when the power is turned back on.
CAUTION
Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.
Adjusting Volume/Balance
(Between Left and Right)/Fader
(Between Front and Rear)
1 Press the MODE button repeatedly to choose the desired mode.
Each press changes the modes as follows:
→ BALANCE → FADER → VOLUME
NOTES
•If the MODE button is not pressed within 5 seconds after selecting the BALANCE or FADER mode, the unit automatically returns to the VOLUME mode.
•When the subwoofer mode is ON, its level may also be adjusted.
•When the BBE mode is ON, its level may also be adjusted.
2 Rotate the Audio Control knob until the desired sound is obtained in each mode.
NOTE
Depending on the connected devices, some functions and display indications do not work.
The BBE (Barcus Berry Electronics) processor installed in this unit is designed to correct the phase distortion inherent in most loudspeaker designs. Ensuring the phase integrity of the signal driving the speakers improves the accurate reproduction of the sound.
1 Press and hold the BBE button for at least 2 seconds to turn on the BBE mode.
Each press toggles between the BBE on and off modes.
2 In BBE mode, press the BBE knob to select the BBE adjusting mode.
Each press changes the adjusting mode.
3 To change to a desired BBE level, rotate the MODE (Audio Control) knob.
The BBE level can be changed from +1 to +3.
Audio Mute Function
Activating this function will instantly lower the volume level by 20 dB.
1 Press the MUTE button to activate the MUTE mode. The audio level will decrease by about 20 dB.
Pressing the MUTE button again will bring the audio back to its previous level.
Displaying Time
1 Press the CLK (clock) button repeatedly until the time is displayed.
Each press changes the modes as follows:
Radio mode
→ |
Radio frequency |
→ |
Clock priority |
|
→ |
TITLE mode |
|
|
||||||||||||
|
|
|
|
|
|
|
mode |
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CD Player/Changer modes |
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|||||||||||
→ |
Playing time |
→ |
Clock priority |
→ |
DISC TEXT |
|
||||||||||||||
|
mode |
|
|
mode |
|
|
mode |
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
TITLE mode |
← |
TRACK |
|
|
|
|
← |
|
|
|
|||||||
|
|
|
TEXT mode |
|
|
|||||||||||||||
NOTE
Selecting any tuner or CD function while in the clock priority mode will interrupt the time display momentarily. The function selected will be displayed for about 5 seconds before the time returns to the display.
5-EN
Basic Operation
TUNE |
MODE/Audio Control |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
g DN f UP CLK SETUP
Setting Time Dimmer Control
1 In the Clock priority mode, press and hold the CLK (clock) button for at least 3 seconds while the time is displayed. The time indication will blink.
2 Rotate the MODE (Audio Control) knob to adjust the hours while the time indication is blinking.
3 When the hours has been adjusted, press the MODE (Audio Control) knob.
4 Rotate the MODE (Audio Control) knob to adjust the minutes while the time indication is blinking. The time is automatically set 5 seconds after the minute adjustment. The time can also be manually set by pressing the MODE (Audio Control) knob.
Changing Lighting Color
CDA-7876 only
1 Press and hold the SETUP button for at least 3 seconds.
2 Press the f UP button repeatedly to select “AMBER”.
Each press of the f UP button changes the modes as shown:
NOTE
If you press the g DN button the display scrolls in reverse sequence.
→NORMAL/HI-FI → AMBER* → DIM → SUB DEMO ← AUX ← SCR ← MUTE ←BEEP ←
CDA-7876 Only
3 Press the TUNE button to toggle the mode between AMBER ON (amber) and AMBER OFF (green).
4 Press the SETUP button to set the selected mode.
Set the DIMMER control to AUTO to decrease the illumination brightness of the unit with the head lights of the vehicle ON. This mode is useful if you feel the unit's backlighting is too bright at night.
1 Press and hold the SETUP button for at least 3 seconds.
2 Press the f UP button repeatedly to select “DIM”(DIMMER).
Each press of the f UP button scrolls the modes as shown:
→NORMAL/HI-FI → AMBER* → DIM → SUB DEMO ← AUX ← SCR ← MUTE ←BEEP ←
CDA-7876 Only
NOTE
If you press the g DN button the display scrolls in reverse sequence.
3 Press the TUNE button to select the Dimmer mode. Each press toggles between DIM AUTO and DIM MANU.
4 Press the SETUP button to activate the normal mode.
Subwoofer On and Off
1 Press and hold the SETUP button for at least 3 seconds.
2 Press the f UP button repeatedly to select “SUB (Subwoofer).”
Each press of the f UP button changes the modes as shown:
→NORMAL/HI-FI → AMBER* → DIM → SUB DEMO ← AUX ← SCR ← MUTE ←BEEP ←
CDA-7876 Only
NOTE
If you press the g DN button the display scrolls in reverse sequence.
6-EN
3 |
Press the TUNE button to toggle mode between |
|
|||||
4 |
SUB-W ON and SUBW OFF. |
|
|||||
Press the SETUP button after setting the SUB-W |
|
||||||
5 |
ON. |
|
|
|
|
||
Press the MODE button repeatedly to select the |
|
||||||
|
SUB-W mode. |
|
|
|
|
||
|
→ SUB-W |
|
→ BALANCE |
|
|
||
|
|
VOLUME ← |
|
FADER ← |
|
||
|
|
|
|
||||
|
|
|
|
|
|
|
|
Press the g DN or f UP button after selecting the SUB-W mode, and the subwoofer output phase is toggled SUBW NOR (0°) or SUBW REV (180°).
6 Rotate Audio Control knob until the desired sound is obtained in each mode.
Sound (Beep) Guide Function
This function will give audible feedback with varying tones depending upon the button pressed.
1 Press and hold the SETUP button for at least 3 seconds.
2 Press the f UP button repeatedly to select “BEEP.”
Each press of the f UP button changes the modes as shown:
NOTE
If you press the g DN button the display scrolls in reverse sequence.
→NORMAL/HI-FI → AMBER* → DIM → SUB DEMO ← AUX ← SCR ← MUTE ←BEEP ←
CDA-7876 Only
3 Press the TUNE button to toggle the mode between BEEP ON and BEEP OFF.
NOTE
The initial setting at the factory is BEEP ON.
4 Press the SETUP button to set the selected mode.
Turning Mute Mode On/Off
If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device. This function can be turned ON or OFF from the head unit by following procedure below.
1 Press and hold the SETUP button for at least 3 seconds.
Press the TUNE button to toggle mode between SCR AUTO and MANU.
•SCR AUTO: the display of CD text is scrolled continuously.
•SCR MANU: the display is scrolled only when a disc is loaded or when a track is changed and the text information exceeds 8 digits.
4 When the setting is completed, press the SETUP button to return to the normal mode.
NOTES
•Initial mode is “SCR MANU.”
•The unit scrolls only CD text names. The disc titles input manually (refer to page 13) cannot be scrolled.
•The display of CD text will scroll even for text less than 8 characters.
7-EN
Basic Operation
SOURCE |
TUNE |
BAND |
Audio Control |
g DN
f UP
CENTER f |
X-OVER |
Setting the AUX Mode (V-Link)
You can input TV/video sound by connecting an optional Ai-NET/RCA Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C) to this component.
1 Press and hold the SETUP button for at least 3 seconds.
2 Press the f UP button repeatedly to select “AUX.”
Each press of the f UP button changes the modes as shown:
NOTE
If you press the g DN button the display scrolls in reverse sequence.
→NORMAL/HI-FI → AMBER → DIM → SUB → BEEP → MUTE DEMO ← AUX (AUX Mode Display Setting ) ← SCR ←
CDA-7876 Only
Displayed after AUX IN ON is set.
3 Press the TUNE button to toggle the mode between AUX ON and AUX OFF.
NOTES
•The initial setting at the factory is AUX OFF.
•You can set the AUX mode display by pressing the g DN or f UP button after AUX ON is set, select the AUX mode display setting, and then press the TUNE button.
•When connecting the KCA-410C, you can set two AUX mode displays.
4 Press the SETUP button to return to normal mode.
SETUP
5 To adjust the volume, etc., first press the SOURCE button and select the AUX mode, then make the necessary adjustment.
NOTE
When using the Versatile Link Terminal (KCA-410C), you can connect two external inputs. To select the mode, press the BAND button on the unit.
Demonstration
This unit has a Demonstration feature which simulates the display functions.
1 Press and hold the SETUP button for at least 3 seconds.
2 Press the f UP button to select the DEMO mode. Each press changes the modes as shown:
→NORMAL/HI-FI → AMBER* → DIM → SUB DEMO ← AUX ← SCR ← MUTE ←BEEP ←
CDA-7876 Only
NOTE
If you press the g DN button the display scrolls in reverse sequence.
3 Press the TUNE button to turn on or off the DEMO mode.
Each press toggles between DEMO ON and DEMO OFF.
If no button is pressed for 30 seconds, the
DEMO mode activates.
NOTES
•The initial setting at the factory is “DEMO OFF.”
•To quit DEMO mode, set to “DEMO OFF.”
4 Press the SETUP button again to return to normal operation.
8-EN
Setting the Bass Control
You can change the Bass Frequency emphasis to create your own tonal preference.
1 Press the CENTER f button to select the BASS (bass Center frequency) control mode.
→ BASS → TREBLE → OFF
2-1 Setting the bass Center frequency:
Press the g DN or f UP button to select the desired bass center frequency.
→ 60Hz ↔ 70Hz ↔ 80Hz ↔ 90Hz ← → 180Hz ↔ 150Hz ↔ 130Hz ↔ 100Hz←
Emphasizes the displayed Bass frequency ranges.
2-2 Setting the bass Band Width (Q-Factor): Press the BAND button to select the desired bass Band Width.
→B. Width1 → B. Width2 → B. Width3 → B. Width4 (Wide) ←.....................................→ (Narrow)
Changes the bass boost band width to wide or narrow. A wide setting will boost a wide range of frequencies above and below the center frequency. A narrower setting will boost only frequencies near the center frequency.
2-3 Setting the bass Level:
Rotate the Audio Control knob to select the desired bass Level (–7~+7).
You can emphasize or weaken the bass frequency.
NOTES
•If no buttons are pressed within 5 seconds, the Bass control setting will be turned off automatically.
•The settings of the Bass and Treble will be individually memorized for each source (FM, AM, XM and CD) until the setting is changed. Depending on the connected devices, some functions and display indications do not work.
Setting the Treble Control
You can change the Treble Frequency emphasis to create your own tonal preference.
1 Press the CENTER f button to select the TREBLE (treble Center frequency) control mode. → BASS → TREBLE → OFF
2-1Setting the treble Center frequency: Press g DN or f UP button to select the desired treble Center frequency.
→ 10kHz ↔ 12.5kHz ↔ 15kHz ↔ 17.5kHz ←
Emphasizes the displayed Treble frequency ranges.
2-2 Setting the treble Level:
Rotate the Audio Control knob to select the desired Treble Level (–7~+7).
You can emphasize the treble frequency.
NOTES
•If no buttons are pressed within 5 seconds, the Treble control setting will be turned off automatically.
•The settings of the Bass and Treble will be individually memorized for each source (FM, AM, XM and CD) until the setting is changed. Depending on the connected devices, some functions and display indications do not work.
Adjusting the built-in Crossover
You can change High Pass Filter and Low Pass Filter on this unit, so that you can create your favorite sound effects.
1 Press the X-OVER button repeatedly to select the desired parameter.
→ HPF → LPF → OFF
When the subwoofer is turned OFF by using this unit, LPF and phase are deactivated.
2 Press the g DN or f UP button to select the desired setting.
1. HPF (Setting the High Pass Filter): OFF ↔ 80Hz ↔ 120Hz ↔160Hz
Outputs all frequencies higher than that selected according to your preference.
2. LPF(Setting the Low Pass Filter): OFF ↔ 80Hz ↔ 120Hz ↔160Hz
Outputs all frequencies lower than that selected according to your preference.
(Only available when using the subwoofer output from this unit.)
NOTES
•If the battery is disconnected, all settings return to factory default.
•If no buttons are pressed within 5 seconds, the setup menu returns to the normal audio display.
9-EN
Loading...