Alpine 68-14470Z98-A User Manual

Size:
2.41 Mb
Download

R

EN

MP3/WMA/AAC CD Receiver

CDE-103BT

FR

ES

• OWNER’S MANUAL

Please read before using this equipment.

• MODE D’EMPLOI

Veuillez lire avant d’utiliser cet appareil.

• MANUAL DE OPERACIÓN

Léalo antes de utilizar este equipo.

ALPINE ELECTRONICS MARKETING, INC.

ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.

ALPINE ITALIA S.p.A.

1-1-8Nishi Gotanda,

161-165Princes Highway, Hallam

Viale C. Colombo 8, 20090 Trezzano

Shinagawa-ku,

Victoria 3803, Australia

Sul Naviglio (MI), Italy

Tokyo 141-0031,Japan

Phone 03-8787-1200

Phone 02-484781

Phone 03-5496-8231

ALPINE ELECTRONICS GmbH

ALPINE ELECTRONICS DE ESPAÑA, S.A.

ALPINE ELECTRONICS OF AMERICA, INC.

Wilhelm-Wagenfeld-Str.1-3,80807 München,

Portal de Gamarra 36, Pabellón, 32

19145 Gramercy Place, Torrance,

Germany

01013 Vitoria (Alava)-APDO133, Spain

California 90501, U.S.A.

Phone 089-3242 640

Phone 945-283588

Phone 1-800-ALPINE-1(1-800-257-4631)

ALPINE ELECTRONICS OF U.K. LTD.

ALPINE ELECTRONICS (BENELUX) GmbH

ALPINE ELECTRONICS OF CANADA, INC.

Alpine House

Leuvensesteenweg 510-B6,

777 Supertest Road, Toronto,

Fletchamstead Highway, Coventry CV4 9TW, U.K.

1930 Zaventem, Belgium

Ontario M3J 2M9, Canada

Phone 0870-3333 763

Phone 02-725-1315

Phone 1-800-ALPINE-1(1-800-257-4631)

ALPINE ELECTRONICS FRANCE S.A.R.L.

 

 

 

 

(RCS PONTOISE B 338 101 280)

 

 

98, Rue de la Belle Etoile, Z.I. Paris Nord Il,

 

 

B.P. 50016, 95945 Roissy Charles de Gaulle

 

 

Cedex, France

 

 

Phone 01-48638989

 

YAMAGATA (Wuxi) Co., Ltd.

Block 28-25,Changjiang Nanlu, WND, jiangsu, China

Designed by ALPINE Japan Printed in China (Y)

68-14470Z98-A

ENGLISH

Contents

Operating Instructions

WARNING

 

WARNING .................................................

3

CAUTION ..................................................

3

PRECAUTIONS ........................................

3

CAUTION ..................................................

5

Getting Started

 

Accessory List ..................................................

6

Turning Power On and Off ...............................

6

Detaching and Attaching the Front Panel ........

6

Initial System Start-Up .....................................

6

Adjusting Volume .............................................

6

Lowering Volume Quickly ...............................

6

Setting Time .....................................................

7

Radio

 

Listening to Radio ............................................

7

Presetting Stations Manually ............................

7

Presetting Stations Automatically ....................

8

Tuning to Preset Stations ..................................

8

CD/MP3/WMA/AAC

 

Playback ...........................................................

8

Repeat Play .......................................................

9

M.I.X. (Random Play) ......................................

9

Searching for CD Text ....................................

10

File/Folder Name Search

 

(concerning MP3/WMA/AAC) ..................

10

Quick Search ..................................................

10

About MP3/WMA/AAC ................................

10

Sound Setting

 

Adjusting Subwoofer Level/Bass Level/Treble

 

Level/Balance (Between Left and Right)/Fader

(Between Front and Rear)/Defeat ...............

12

Setting the Bass Control .................................

12

Setting the Treble Control ...............................

13

Adjusting the High Pass Filter ........................

13

Turning Loudness On/Off ...............................

13

Other Functions

 

Displaying the Text .........................................

14

Displaying Time .............................................

14

Using the Front AUX Input Terminal .............

15

SETUP

 

BLUETOOTH Setting

 

Setting the BLUETOOTH Connection

 

(BT IN) .........................................................

16

Sound Customizing

 

Subwoofer On and Off .....................................

16

Setting the Subwoofer System .........................

16

Visual Customizing

 

Changing Lighting Color .................................

16

Dimmer Control ...............................................

16

Scroll Type Setting ...........................................

16

Scroll Setting (TEXT SCR) ..............................

16

Demonstration ..................................................

16

MP3/WMA/AAC

 

Playing MP3/WMA/AAC Data

 

(PLAY MODE) .............................................

16

External Device

 

Turning Mute Mode On/Off (INT MUTE) ......

16

Connecting to an External Amplifier

 

(POWER IC) .................................................

17

Setting the AUX+ SETUP Mode .....................

17

Setting the AUX NAME mode .........................

17

1-EN

BLUETOOTH Operation

 

Setup Before Using .........................................

18

About BLUETOOTH ..................................

18

Before Using Hands-FreeFunction ............

18

How to connect to a BLUETOOTH

 

compatible device (Pairing) .....................

18

BLUETOOTH SETUP ...................................

18

BLUETOOTH Setup Operation ..................

18

Setting the BLUETOOTH Device ...................

19

Setting the Search Mode ..................................

19

Setting the Received Calls automatically

 

(Auto Answer) ..............................................

19

Deleting a BLUETOOTH Device from

 

the list ...........................................................

19

Displaying the phone service provider

 

name .............................................................

19

Adjusting the volume for the microphone

 

input .............................................................

19

Selecting the output speaker ............................

19

Displaying the firmware version ......................

19

Updating the firmware .....................................

19

Hands-FreePhone Control .............................

20

About the Hands-FreePhone ......................

20

Answering a Call .........................................

20

Hanging up the Telephone ...........................

20

Redial Function ...........................................

20

Calling .........................................................

20

Redialing a Number In Outgoing History ........

20

Dialing a Number In Incoming History ...........

20

Dialing a Number In Incoming Missed Call

 

History ..........................................................

20

Dialing a Number In The Phone Book ............

21

Voice Dial Operation ......................................

21

Adjusting the volume when receiving

 

a Call ...........................................................

21

Call Switching Operation ...............................

21

USB memory (Optional)

 

Controlling USB memory (Optional) .............

21

Playing MP3/WMA/AAC Files with the USB

 

memory (Optional) ......................................

21

USB Memory Connection (Optional) .............

22

About MP3/WMA/AAC File of USB

 

Memory .......................................................

22

iPhone/iPod (Optional)

 

Playback ..........................................................

23

Searching for a desired Song ..........................

23

Quick Search ...................................................

23

Direct Search Function ....................................

24

Select Playlist/Artist/Album/

 

Genre/Composer ..........................................

24

Random Play Shuffle (M.I.X.) ........................

24

Repeat Play .....................................................

25

Displaying the Text .........................................

25

Information

 

In Case of Difficulty ........................................

26

Specifications ..................................................

29

Installation and Connections

Warning ...................................................

30

Caution ...................................................

30

Precautions ............................................

30

Installation .......................................................

31

Mounting the Microphone ..............................

31

Connections .....................................................

32

LIMITED WARRANTY

 

2-EN

Operating Instructions

WARNING

DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS.

Doing so may result in personal injury or damage to the product.

WARNING

This symbol means important instructions. Failure to heed them can result in serious injury or death.

DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.

Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISES WHILE DRIVING.

Excessive volume levels that obscure sounds such as emergency vehicle sirens or road warning signals (train crossings, etc.) can be dangerous and may result in an accident. LISTENING AT LOUD VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING DAMAGE.

MINIMIZE DISPLAY VIEWING WHILE DRIVING.

Viewing the display may distract the driver from looking ahead of the vehicle and cause an accident.

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident, fire or electric shock.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

CAUTION

This symbol means important instructions. Failure to heed them can result in injury or material property damage.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS.

Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Center for repairing.

PRECAUTIONS

Product Cleaning

Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.

Temperature

Be sure the temperature inside the vehicle is between +60°C (+140°F) and –10°C(+14°F) before turning your unit on.

Moisture Condensation

You may notice the CD playback sound wavering due to condensation. If this happens, remove the disc from the player and wait about an hour for the moisture to evaporate.

Damaged Disc

Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

Maintenance

If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing.

USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.

Failure to do so may result in fire or electric shock.

DO NOT BLOCK VENTS OR RADIATOR PANELS.

Doing so may cause heat to build up inside and may result in fire.

USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.

Use for other than its designed application may result in fire, electric shock or other injury.

3-EN

Never Attempt the Following

Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism.

Do not attempt to insert a disc into the unit when the unit power is off.

Inserting Discs

Your player accepts only one disc at a time for playback. Do not attempt to load more than one disc.

Make sure the label side is facing up when you insert the disc. “ERROR” will be displayed on your player if you insert a disc incorrectly. If “ERROR” continues to be displayed even though the disc has been inserted correctly, push the RESET switch with a pointed object such as a ballpoint pen.

Playing a disc while driving on a very bumpy road may result in skips, but this will not scratch the disc or damage the player.

New Discs

To prevent the CD from jamming, “ERROR” is displayed if discs with irregular surfaces are inserted or if discs are inserted incorrectly. When a new disc is ejected immediately after initial loading, use your finger to feel around the inside of the center hole and outside edge of the disc. If you feel any small bumps or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub the inside edge of the hole and outside edge of the disc with a ballpoint pen or other such instrument, then insert the disc again.

Center Hole

Center Hole

 

New Disc

Bumps

Outside

 

(Bumps)

Irregular Shaped Discs

Be sure to use round shape discs only for this unit and never use any special shape discs.

Use of special shape discs may cause damage to the mechanism.

Installation Location

Make sure this unit will not be installed in a location subjected to:

Direct sun and heat

High humidity and water

Excessive dust

Excessive vibrations

Correct Handling

Do not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface. Do not affix tape, paper, or gummed labels to the disc. Do not write on the disc.

CORRECT

INCORRECT

CORRECT

Disc Cleaning

Fingerprints, dust, or soil on the surface of the disc could cause the CD player to skip. For routine cleaning, wipe the playing surface with a clean, soft cloth from the center of the disc to the outer edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc.

Disc Accessories

There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause the disc to be out of standard specifications and may create operational problems. We recommend not using these accessories on discs played in Alpine CD players.

Transparent Sheet

Disc Stabilizer

4-EN

On handling Compact Discs (CD/CD-R/CD-RW)

Do not touch the surface.

Do not expose the disc to direct sunlight.

Do not affix stickers or labels.

Clean the disc when it is dusty.

Make sure that there are no bumps around the disc.

Do not use commercially available disc accessories.

Do not leave the disc in the car or the unit for a long time. Never expose the disc to direct sunlight. Heat and humidity may damage the CD and you may not be able to play it again.

To customers using CD-R/CD-RW

If a CD-R/CD-RWcannot be played back, make sure the last recording session was closed (finalized).

Finalize the CD-R/CD-RWif necessary, and attempt playback again.

About media that can be played

Use only compact discs with the label side showing the CD logo marks below.

If you use unspecified compact discs, correct performance cannot be guaranteed.

You can play CD-Rs(CD-Recordables)/CD-RWs(CDReWritables) which have been recorded only on audio devices. You can also playCD-Rs/CD-RWscontaining MP3/WMA/AAC formatted audio files.

Some of the following CDs may not play on this unit: Flawed CDs, CDs with fingerprints, CDs exposed to extreme temperatures or sunlight (e.g., left in the car or this unit), CDs

recorded under unstable conditions, CDs on which a recording failed or a re-recordingwas attempted,copy-protectedCDs which do not conform to the audio CD industry standard.

Use discs with MP3/WMA/AAC files written in a format compatible with this unit. For details, see pages 10-11.

ROM data other than audio files contained in a disc will not produce sound when played back.

Protecting the USB connection terminal

Only USB flash memory devices can be connected to the USB connection terminal on this unit. Correct performance using other USB products cannot be guaranteed. A USB hub is not supported.

Do not connect a USB memory over 20 mm wide. Also, avoid connecting USB memory and Front Aux at the same time.

If a USB device is inserted in the unit, it projects out and may be a danger while driving. Use a commercially available USB extension cable, and connect it in a safe way.

Depending on the connected USB memory device, the unit may not function or some functions may not be performed.

The audio file format that can be played back on the unit is MP3/WMA/AAC.

Artist/song name, etc., can be displayed, however characters may not be correctly displayed.

CAUTION

Alpine accepts no responsibility for lost data, etc., even if data, etc. is lost while using this product.

On Handling USB Memory

To prevent malfunction or damage, note the following points. Read the USB memory Owner’s Manual thoroughly.

Do not touch the terminals by hand or metal. Do not subject USB memory to excessive shock.

Do not bend, drop, disassemble, modify or soak in the water.

Avoid usage or storage in the following locations:

Anywhere in the car exposed to direct sunlight or high temperatures.

Anywhere the possibility of high humidity or corrosive substances are present.

Fix the USB memory in a location where driver operation will not be hindered.

USB memory may not function correctly at high or low temperature.

The USB flash memory supports only 512 or 2,048 bytes per sector.

Use only certified USB memory. Note that even certified USB memory, may not function correctly depending on its type or state.

USB memory function is not guaranteed. Use USB memory according to the terms of agreement.

Depending on the settings of the USB memory type, memory state or encoding software, the unit may not play back or display properly.

A file that is copy-protected(copyright protection) cannot be played back.

USB memory may take time to start playback. If there is a particular file other than audio in the USB memory, it may take considerable time before the file is played back or searched.

The unit can play back “mp3”, “wma” or “m4a” file extensions.

Do not add the above extensions to a file other than audio data. This non-audiodata will not be recognized. The resulting playback may contain noise that can damage speakers and/or amplifiers.

It is recommended to back up important data on a personal computer.

Do not remove the USB device while playback is in progress. Change SOURCE to something other than USB, then remove the USB device to prevent possible damage to its memory.

Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.

iPod is a trademark of Apple Inc., registered in the U.S. and other countries.

iPhone is a trademark of Apple Inc.

“Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.

“Works with iPhone” means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards.

Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

The BLUETOOTH word mark and logos are owned by the BLUETOOTH SIG, Inc. and any use of such marks by Alpine Electronics, Inc. is under license.

“MPEG Layer-3audio coding technology licensed from Fraunhofer IIS and Thomson.”

“Supply of this product only conveys a license for private, non-commercialuse and does not convey a license nor imply any right to use this product in any commercial (i.e. revenuegeneration) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/or other networks or in other electronic content distribution systems, such aspay-audiooraudio-on-demandapplications. An independent license for such use is required. For details, please visit http://www. mp3licensing.com”

5-EN

Getting Started

Rotary encoder

SOURCE/SOUND/SETUP

 

 

 

 

 

 

 

 

 

 

 

 

 

(Release)

 

 

/

 

/ENT

 

 

 

 

 

 

 

 

 

 

 

 

 

/MUTE

 

 

 

 

Accessory List

Head unit ............................................................................

1

Power cable ........................................................................

1

Microphone (4m)................................................................

1

Mounting sleeve.................................................................

1

Carrying case.....................................................................

1

Bracket key.........................................................................

2

Screw (M5 × 8)....................................................................

4

Owner’s Manual ..........................................................

1 set

Turning Power On and Off

Press SOURCE/to turn on the unit.

The unit can be turned on by pressing any other button except and

(Release).

Press and hold SOURCE/for at least 2 seconds to turn off the unit.

The first time power is turned on, the volume will start from level 12.

Attaching

1 Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit.

2 Push the left side of the front panel until it locks firmly into the main unit.

Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit.

Attach the front panel carefully, holding the sides of the front panel to avoid pushing buttons by mistake.

Initial System Start-Up

Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc.

1 Turn off the unit power.

2 Remove the detachable front panel.

3 Press RESET with a ballpoint pen or similar pointed object.

RESET switch

Detaching and Attaching the Front Panel

Detaching

1 Turn off the unit power.

2 Press(Release) at the lower left side until the front panel pops out.

3 Grasp the left side of the front panel and pull it out.

The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel). This is not a malfunction.

To protect the front panel, place it in the supplied carrying case.

When detaching the front panel, do not apply excessive force as it may result in malfunction.

Adjusting Volume

Turn the Rotary encoder until the desired sound is obtained.

Lowering Volume Quickly

Activating the Audio Mute function will instantly lower the volume level by 20 dB.

Press /MUTE to activate the MUTE mode.

The audio level will decrease by about 20 dB.

Pressing /MUTE again will bring the audio back to its previous level.

6-EN

Setting Time

Radio

 

1

2

3

4

5

Press and hold SOUND/SETUP for at least

2 seconds to activate the SETUP mode.

SOURCE/

BAND

Turn the Rotary encoder to select the CLOCK ADJ mode, and then press //ENT.

The time indication will blink.

Turn the Rotary encoder to adjust the hours while the time indication is blinking.

When the hour has been adjusted, press //ENT.

TUNE/A.ME

Preset buttons

Turn the Rotary encoder to adjust the minutes

(1 through 6)

while the time indication is blinking.

 

6 Press and hold SOUND/SETUP for at least 2 seconds to return to normal mode.

To synchronise the clock to another clock/watch or radio time

announcement, press and hold / /ENT for at least 2 seconds after setting the “hour.” Minutes will reset to “00”. If the display shows over “30” minutes when you do this, the time will advance one hour.

Pressing /MUTE will return to the previous mode.

If no operation is performed for 60 seconds, the unit will return to normal mode automatically.

Listening to Radio

1 Press SOURCE/to select TUNER mode.

2 Press BAND repeatedly until the desired radio band is displayed.

F1 (FM1)F2 (FM2)AMF1 (FM1)

3 Press TUNE/A.ME to select the tuning mode.

Controllable with Remote Control

 

DX SEEK (Distance mode)

SEEK (Local mode)

This unit can be controlled with an optional Alpine

 

OFF (Manual mode)

DX SEEK

remote control. For details, consult your Alpine dealer.

The initial mode is Distance mode.

Point the optional remote control transmitter at the

 

 

 

 

 

remote-controlsensor.

Distance mode:

 

 

 

 

 

 

 

Remote control sensor

 

Both strong and weak stations will be automatically tuned in

 

 

(Automatic Seek Tuning).

 

 

Local mode:

 

 

 

 

 

Only strong stations will be automatically tuned in (Automatic

 

 

Seek Tuning).

 

 

 

 

Manual mode:

 

 

 

 

 

The frequency is manually tuned in steps (Manual tuning).

 

4

Press

or

to tune in the desired station.

 

 

Holding down

 

or

will change the frequency

 

 

continuously.

 

 

 

Presetting Stations Manually

1 Select the radio band and tune in a desired radio station you wish to store in the preset memory.

2 Press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish to store the station.

The selected station is stored.

The display shows the band, preset number and station frequency memorized.

A total of 18 stations can be stored in the preset memory (6 stations for each band; FM1, FM2 and AM).

If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station.

7-EN

Presetting Stations Automatically

1 Press BAND repeatedly until the desired radio band is displayed.

2 Press and hold TUNE/A.ME for at least 2 seconds.

The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into preset buttons 1 to 6 in order of signal strength.

When the automatic memory has been completed, the tuner goes to the station stored in preset location No.1.

If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began.

CD/MP3/WMA/AAC

SOURCE/Rotary encoder

 

 

 

 

 

 

1

 

 

 

2

 

 

 

 

 

 

 

 

/MUTE

 

 

 

 

4 5

 

VIEW

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

/

/ENT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

/ESC

Tuning to Preset Stations

1 Press BAND repeatedly until the desired band is displayed.

2 Press any one of the station preset buttons

(1 through 6) that has your desired radio station in memory.

The display shows the band, preset number and frequency of the station selected.

Playback

1 Insert a disc with the label side facing up.

The disc will be pulled into the unit automatically, and the “” indicator lights up .

When a disc is already inserted, press SOURCE/to switch to the DISC mode.

The mode will change every time the button is pressed.

TUNER DISCUSB AUDIOiPod*1/AUX+*2

AUX*3 TUNER

*1 Displayed only when the iPhone/iPod is connected and AUX+ SETUP is set to OFF, refer to “Setting the AUX+ SETUP Mode” (page 17).

*2 Displayed only when the AUX+ SETUP is set to ON, refer to “Setting the AUX+ SETUP Mode” (page 17).

*3 Refer to “Using the Front AUX Input Terminal” (page 15).

2 While playing back MP3/WMA/AAC, press 1or

2 to select the desired folder.

Pressing and holding 1 or2 will change folders continuously.

8-EN