Alpine 68-04123Z09-A User Manual

Size:
765.13 Kb
Download

R

ES

MP3/WMA CD Receiver

CDA-9854LPT

EN

• MANUAL DE OPERACIÓN

Léalo antes de utilizar este equipo.

MANUAL DO PROPRIETÁRIO

Leia por favor este manual antes de utilizar este equipamento.

• OWNER'S MANUAL

Please read before using this equipment.

ALPINE ELECTRONICS MARKETING, INC.

ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.

ALPINE ELECTRONICS FRANCE S.A.R.L.

1-1-8Nishi Gotanda,

161-165Princes Highway, Hallam

(RCS PONTOISE B 338 101 280)

Shinagawa-ku,

Victoria 3803, Australia

98, Rue de la Belle Etoile, Z.I. Paris Nord Il,

Tokyo 141-0031,Japan

Phone 03-8787-1200

B.P. 50016, 95945 Roissy Charles de Gaulle

Phone 03-5496-8231

ALPINE ELECTRONICS GmbH

Cedex, France

ALPINE ELECTRONICS OF AMERICA, INC.

Phone 01-48638989

Frankfurter Ring 117, 80807 München, Germany

 

19145 Gramercy Place, Torrance,

Phone 089-3242 640

ALPINE ITALIA S.p.A.

California 90501, U.S.A.

ALPINE ELECTRONICS OF U.K. LTD.

Viale C. Colombo 8, 20090 Trezzano

Phone 1-800-ALPINE-1(1-800-257-4631)

Sul Naviglio (MI), Italy

Alpine House

ALPINE ELECTRONICS OF CANADA, INC.

Phone 02-484781

Fletchamstead Highway, Coventry CV4 9TW, U.K.

 

777 Supertest Road, Toronto,

Phone 0870-3333 763

ALPINE ELECTRONICS DE ESPAÑA, S.A.

Ontario M3J 2M9, Canada

 

Portal de Gamarra 36, Pabellón, 32

Phone 1-800-ALPINE-1(1-800-257-4631)

 

01013 Vitoria (Alava)-APDO133, Spain

 

 

Phone 945-283588

Dalian Dongtai Colour Printing Technology Co., Ltd.

Designed by ALPINE Japan

No.24 Liaohexisan Road Dalian Economic&Technical

Printed in China (Y)

Development Zone, China

68-04123Z09-A

CHA-S634

CHA-1214

CHM-S630

Cambiador de CD para CDA-9854L.

Disqueteiras para CDA-9854L.

CD changer for CDA-9854L.

Cambiador de CD para CDA-9854L.

Disqueteiras para CDA-9854L.

CD changer for CDA-9854L.

¡Los cambiadores Alpine de CD le ofrecen más!

Más selecciones musicales, más versatilidad y más ventajas.

CHA-S634es un cambiador de seis discos de alto rendimiento con nuevo M DAC,CD-R/RWPLAY BACK, MP3 PLAY BACK y CD TEXT. El modeloCHA-1214Ai-NETalberga 12 discos y el modeloCHM-S630M-Buses un cambiador de seis discos de tamaño reducido con unCD-R/RWPLAY BACK.

As Disqueteiras da Alpine dão-lhemais!

Mais seleções musicais, mais versatilidade, mais comodidade.

O CHA-S634é uma disqueteira de 6 discos de elevado desempenho com um novo M DAC, reprodução deCD-R/RW,reprodução de MP3 e CD TEXT. O modeloCHA-1214Ai-NETtem capacidade para 12 discos e o modeloCHM-S630M-Busé uma disqueteira de 6 discos super compacta com reprodução deCD-R-/RW.

Alpine CD Changers Give You More!

More musical selections, more versatility, more convenience.

The CHA-S634is ahigh-performance6-discchanger with a new M DAC,CD-R/RWPLAY BACK, MP3 PLAY BACK and CD TEXT. TheCHA-1214Ai-NETmodel holds 12 discs, and theCHM-S630M-Busmodel is asuper-compact6-discchanger with aCD-R/RWPLAY BACK.

Contents

 

Operating Instructions

 

WARNING

 

WARNING ..................................................

3

CAUTION ...................................................

3

PRECAUTIONS .........................................

3

About the GlideTouch™ Bar

 

Operation ......................................

6

Getting Started

 

Turning Power On and Off ...............................

7

Initial System Start-Up .....................................

7

Setting Time ......................................................

7

Opening and Closing the Movable Display ......

7

Display Tilt Adjustment ....................................

8

Adjusting Volume .............................................

8

Lowering Volume Quickly ................................

8

Detaching and Attaching the Front Panel .........

8

Radio

 

Changing the Radio Frequencies for each

 

Country ..........................................................

9

Listening to Radio .............................................

9

Manual Storing of Station Presets ....................

9

Automatic Memory of Station Presets ..............

9

Tuning to Preset Stations ................................

10

Station Title Search Function ..........................

10

Frequency Search Function ............................

10

CD / MP3 / WMA

 

Playback ..........................................................

10

Repeat Play .....................................................

11

M.I.X. (Random Play) ....................................

12

Scanning Programs .........................................

12

Searching from CD Text .................................

12

File/Folder Name Search (concerning MP3/

 

WMA) .........................................................

12

Quick Search ...................................................

13

About MP3/WMA ..........................................

13

ENGLISH

Sound Setting

 

Adjusting Balance (Between Left and Right)/

 

Fader (Between Front and Rear)/Defeat ......

15

Equalizer Presets .............................................

15

Setting User's EQ mode ..................................

15

Adjusting and Storing the Parametric Equalizer

Curve ...........................................................

16

Adjusting and Storing the Graphic Equalizer

 

Curve ...........................................................

16

Recalling the Stored Equalizer Curve .............

17

About the Crossover .......................................

17

Adjusting and Storing the Crossover

 

Settings ........................................................

18

Recalling the Stored Crossover Settings .........

19

About Time Correction ...................................

19

Setting the Time Correction Unit ....................

20

Adjusting and Storing the Time Correction ....

20

Recalling the Stored Time Correction

 

Settings ........................................................

21

Setting the MX Mode .....................................

21

Other Functions

 

Displaying the Title/Text .................................

22

Titling Discs/Stations ......................................

23

Erasing Disc Title/Station Title .......................

23

Displaying Time ..............................................

23

Setting Amplifier Link ....................................

24

Displaying the External Amplifier

 

Information ..................................................

24

i-Personalize™Operation

 

About i-Personalize™ .....................................

25

Data Downloading ..........................................

25

1-EN

SETUP

 

General Setting

 

Playing MP3/WMA Data (PLAY MODE) .....

26

Sound (Beep) Guide Function ........................

26

Turning Mute Mode On/Off ...........................

26

Setting Tone Defeat for External Devices .......

26

Setting the AUX Mode (V-Link) .....................

27

Setting the External Digital Input ...................

27

Connecting to an External Amplifier ..............

27

Setting the Steering Position ...........................

27

Tuner Setting

 

Switching the Tuner Mode ..............................

27

Audio Setting

 

Subwoofer On and Off ....................................

27

Setting the Subwoofer System ........................

27

Setting the Response Slope for the High Range

Speaker (TW SETUP) .................................

28

Connecting an Optical Digital Compatible

 

Audio Processor and an Ai-NET

 

Non-CompatibleDVD Player .....................

28

Display Setting

 

Dimmer Control ..............................................

28

Setting the Display Dimmer ...........................

28

Scroll Type Setting ..........................................

28

Scroll Setting ...................................................

28

Adjusting Display Contrast .............................

28

Setting the Temperature Display for the

 

External Amplifier .......................................

28

Setting the Display of the Audio

 

Level Indicator .............................................

28

Demo Setting

 

Demonstration .................................................

28

iPod™ Operation (Optional)

 

Playback ..........................................................

29

Searching for a desired Song ..........................

29

Random Play Shuffle (M.I.X.) ......................

30

Repeat Play .....................................................

30

Displaying the Text .........................................

31

Changer (Optional)

 

Controlling CD Changer (Optional) ...............

31

Playing MP3 Files with the CD Changer

 

(Optional) ....................................................

32

Multi-ChangerSelection (Optional) ...............

32

Remote Control

 

Controls on Remote Control ...........................

32

Operating the Audio Processor .......................

33

Battery Replacement .......................................

33

Information

 

In Case of Difficulty .......................................

34

Specifications ..................................................

36

Installation and Connections

Warning ...........................................................

37

Caution ............................................................

37

Precautions ......................................................

37

Installation ......................................................

38

Connections ....................................................

39

2-EN

Operating Instructions

WARNING

WARNING

This symbol means important instructions. Failure to heed them can result in serious injury or death.

DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.

Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISE WHILE DRIVING.

Failure to do so may result in an accident.

MINIMIZE DISPLAY VIEWING WHILE DRIVING.

Viewing the display may distract the driver from looking ahead of the vehicle and cause an accident.

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident, fire or electric shock.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.

Failure to do so may result in fire or electric shock.

DO NOT BLOCK VENTS OR RADIATOR PANELS.

Doing so may cause heat to build up inside and may result in fire.

USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.

Use for other than its designed application may result in fire, electric shock or other injury.

DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS.

Doing so may result in personal injury or damage to the product.

CAUTION

This symbol means important instructions. Failure to heed them can result in injury or material property damage.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS.

Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Center for repairing.

DO NOT MIX NEW BATTERIES WITH OLD BATTERIES. INSERT WITH THE CORRECT BATTERY POLARITY.

When inserting the batteries, be sure to observe proper polarity (+ and –)as instructed. Rupture or chemical leakage from the battery may cause fire or personal injury.

KEEP FINGERS AWAY WHILE THE MOTORIZED FRONT PANEL OR MOVING MONITOR IS IN MOTION.

Failure to do so may result in personal injury or damage to the product.

PRECAUTIONS

Product Cleaning

Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.

Temperature

Be sure the temperature inside the vehicle is between +60°C (+140°F) and –10°C(+14°F) before turning your unit on.

Moisture Condensation

You may notice the CD playback sound wavering due to condensation. If this happens, remove the disc from the player and wait about an hour for the moisture to evaporate.

Damaged Disc

Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism.

Maintenance

If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing.

3-EN

PRECAUTIONS

Never Attempt the Following

Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism.

Do not attempt to insert a disc into the unit when the unit power is off.

Installation Location

Make sure the CDA-9854Lwill not be installed in a location subjected to:

Direct sun and heat

High humidity and water

Excessive dust

Excessive vibrations

Correct Handling

Do not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface. Do not affix tape, paper, or gummed labels to the disc. Do not write on the disc.

CORRECT

Inserting Discs

Your player accepts only one disc at a time for playback. Do not attempt to load more than one disc.

Make sure the label side is facing up when you insert the disc. Your player will automatically eject any disc that is inserted incorrectly. If the player continues to eject a correctly inserted disc, push the RESET switch with a pointed object such as a ballpoint pen.

Playing a disc while driving on a very bumpy road may result in skips, but this will not scratch the disc or damage the player.

New Discs

As a protective measure to prevent the CD from jamming, the CD player will automatically eject discs with irregular surfaces or inserted incorrectly. When a new disc is inserted into the player and ejected after initial loading, using your finger, feel around the inside of the center hole and outside edge of the disc. If you feel any small bumps or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub the inside edge of the hole and outside edge of the disc with a ballpoint pen or other such instrument, then insert the disc again.

Center Hole

Center Hole

New

 

 

Disc

Bumps

 

Outside

 

 

(Bumps)

Irregular Shaped Discs

Be sure to use round shape discs only for this unit and never use any special shape discs.

Use of special shape discs may cause damage to the mechanism.

INCORRECT

CORRECT

Disc Cleaning

Fingerprints, dust, or soil on the surface of the disc could cause the CD player to skip. For routine cleaning, wipe the playing surface with a clean, soft cloth from the center of the disc to the outer edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc.

Disc Accessories

There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause the disc to be out of standard specifications and may create operational problems. We recommend not using these accessories on discs played in Alpine CD players.

Transparent Sheet Disc Stabilizer

4-EN

On handling Compact Discs (CD/CD-R/CD-RW)

Do not touch the surface.

Do not expose the disc to direct sunlight.

Do not affix stickers or labels.

Clean the disc when it is dusty.

Make sure that there are no bumps around the disc.

Do not use commercially available disc accessories.

Do not leave the disc in the car or the unit for a long time. Never expose the disc to direct sunlight. Heat and humidity may damage the CD and you may not be able to play it again.

To customers using CD-R/CD-RW

If a CD-R/CD-RWcannot be played back, make sure the last recording session was closed (finalized).

Finalize the CD-R/CD-RWif necessary, and attempt playback again.

About media that can be played.

Use only compact discs with the label side showing the CD logo marks below.

If you use unspecified compact discs, correct performance cannot be guaranteed.

You can play CD-Rs(CD-Recordable)/CD-RWs(CDReWritable) which have been recorded only on audio devices. You can also playCD-Rs/CD-RWscontaining MP3/WMA formatted audio files.

Some of the following CDs may not play on this unit: Flawed CDs, CDs with fingerprints, CDs exposed to extreme temperatures or sunlight (e.g., left in the car or this unit), CDs recorded under unstable conditions, CDs on which a recording failed or a re-recordingwas attempted, copyprotected CDs which do not conform to the audio CD industry standard.

Use discs with MP3/WMA files written in a format compatible with this unit. For details, see page 13-14.

Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and /or other countries.

Apple, the Apple logo and iPod are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.

5-EN

About the GlideTouch™ Bar Operation

1 Touch or press the desired position on the GlideTouch bar.

Function guide

ON OFF

GlideTouch bar

Press any one of the 6 positions on the GlideTouch bar to which a function has been assigned in the guide display.

For example, to select ON, press the GlideTouch bar directly below where ON is indicated in the guide display. The manual expresses this as follows: “Change the setting by pressing the GlideTouch bar below either the ON or OFF function indicators.”

2 Move your finger on the GlideTouch bar to the left or right.

GlideTouch bar

Place your finger on the GlideTouch bar and slide it gently to the left or right. Items or lists in the display will change as you move your finger across the GlideTouch bar.

To select items on the following page, scroll the page as follows:

Place and hold your finger on either side of the GlideTouch bar for at least 3 seconds.

When scrolling the page toward the left, place and hold your finger on the left side of the GlideTouch bar. When scrolling the page toward the right, place and hold your finger on the right side of the GlideTouch bar.

Move your finger quickly on the GlideTouch bar toward the side that the page is scrolled.

6-EN

Getting Started

SOURCE/

 

 

 

POWER

MUTE

RESET

Rotary encoder

MENU

GlideTouch bar

c

7 Adjust “Minute” by turning the Rotary encoder by repeating steps 5 and 6.

8 After setting, press and hold MENU for at least 2 seconds to return to normal mode.

To synchronize the clock to another clock/watch or radio time announcement, press and hold the Rotary encoder for at least 2 seconds after setting the “hour.” Minutes will reset to 00.

If the display shows over “30” minutes when you do this, the time will advance one hour.

If MENU is pressed while adjusting or setting the items in the MENU mode, the unit will return to the previous selection screen.

By pressing the GlideTouch bar under RETURN in the MENU mode, the unit will return to the normal mode.

If no operation is performed for 60 seconds, the unit will return to the normal mode.

Turning Power On and Off

Press SOURCE/POWER to turn on the unit.

The unit can be turned on by pressing any other button except TITLE and eject c.

Press and hold SOURCE/POWER for at least 2 seconds to turn off the unit.

• The first time power is turned on, the volume will start from level 12.

Initial System Start-Up

Be sure to press the RESET switch when using the unit for the first time, after installing the CD changer, after changing the car battery, etc.

1 Turn off the unit power.

2 Press RESET with aball-pointpen or similar pointed object.

Setting Time

1 Press MENU.

2 Select SETUP by sliding your finger on the GlideTouch bar to the left or right. Press the

GlideTouch bar under SETUP.

The main SETUP menu is displayed.

3 Select GENERAL by sliding your finger on the GlideTouch bar to the left or right.

Press the GlideTouch bar under GENERAL.

The GENERAL SETUP menu is displayed.

4 Select CLOCK by sliding your finger on the GlideTouch bar to the left or right. Press the

GlideTouch bar under CLOCK.

5 Select “Hour” by sliding your finger on the GlideTouch bar to the left or right.

6 Adjust “Hour” by turning the Rotary encoder.

Opening and Closing the Movable Display

Press c.

The movable display will open.

To close the movable display, press c again.

The movable display will close.

Do not apply shock to the movable display when it is open as it may result in malfunction of the unit.

The display may be dim during low temperatures and immediately after turning on the power. The brightness will return to normal as time elapses.

The display will stop at the set tilt angle when closing.

Caution

Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.

7-EN

Display Tilt Adjustment

The movable display may be adjusted to 3 different angles depending upon user preference.

1 Press MENU.

2 Select TILT ADJUST by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under TILT ADJUST.

3 Touch UP or DOWN on the GlideTouch bar to adjust the display angle.

• Selecting RETURN will return to the previous screen.

Movable display

4 After setting, press and hold MENU for at least 2 seconds to return to normal mode.

The adjusted tilt angle of the display is stored in memory. There is no need to re-adjustthe tilt angle when the power is turned back on.

If MENU is pressed while adjusting or setting the items in the MENU mode, the unit will return to the previous selection screen.

By pressing the GlideTouch bar under RETURN in the MENU mode, the unit will return to the normal mode.

Caution

Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.

Adjusting Volume

Turn the Rotary encoder until the desired sound is obtained.

Lowering Volume Quickly

Activating the Audio Mute function will instantly lower the volume level by 20 dB.

Press MUTE to activate the MUTE mode.

The audio level will decrease by about 20 dB.

Pressing MUTE again will bring the audio back to its previous level.

Detaching and Attaching the Front Panel

Detaching

1 Turn off the unit power.

2 Press(Release) at the upper left side until the front panel pops out.

3 Grasp the left side of the front panel and pull it out.

The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel.) This is not a malfunction.

To protect the front panel, place it in the supplied carrying case.

Attaching

1 Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit.

2 Push the left side of the front panel until it locks firmly into the main unit.

2

1

Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit.

Attach the front panel carefully. Hold the panel by its sides to avoid pushing any buttons by mistake.

8-EN