Allied Telesis AR44xS User Manual
Size:
176.13 Kb
Download

Software Maintenance Release Note

Version 281-02

for AR750S, AR750S-DP,AR770S, AR415S, AR450S and AR44xS series routers, andAT-8600series switches

This software maintenance release note lists the issues addressed and enhancements made in Maintenance Version 281-02for Software Version 2.8.1. Version details are listed in the following table:

Models

Series

Release File

Date

Size (bytes)

GUI file

 

 

 

 

 

 

AR415S, AR440S, AR441S, AR442S, AR450S

AR400

54281-02.rez

5 September 06

4673896

415s_281-02_en_d.rsc

 

 

 

 

 

440s_281-02_en_d.rsc

 

 

 

 

 

441s_281-02_en_d.rsc

 

 

 

 

 

442s_281-02_en_d.rsc

 

 

 

 

 

450s_281-02_en_d.rsc

 

 

 

 

 

 

AR750S, AR750S-DP,AR770S

 

55281-02.rez

5 September 06

3936164

750s_281-02_en_d.rsc(AR750S andAR750S-DP)

 

 

 

 

 

 

AT-8624T/2M,AT-8624PoE,AT-8648T/2SP

AT-8600

sr281-02.rez

5 September 06

2251144

sr24_281-02_en_d.rsc

 

 

 

 

 

 

Caution: Using a maintenance version on the wrong model may cause unpredictable results, including disruption to the network. This maintenance release note should be read in conjunction with the following documents:

the Release Note for Software Version 2.8.1, available from www.alliedtelesyn.co.nz/documentation/relnotes/relnotes.html

your router or switch’s Document Set for Software Release 2.8.1. This document set is available on the CD-ROMthat shipped with your router or switch, or fromwww.alliedtelesyn.co.nz/documentation/documentation.html

Caution: Information in this release note is subject to change without notice and does not represent a commitment on the part of Allied Telesis Inc. While every effort has been made to ensure that the information contained within this document and the features and changes described are accurate, Allied Telesis Inc. can not accept any type of liability for errors in, or omissions arising from the use of this information.

Enabling and Installing this Release

2

Enabling and Installing this Release

To use this maintenance release you must have a base release license for Software Release 2.8.1. Contact your distributor or reseller for more information. To enable this release and install it as the preferred release, use the commands:

enable rel=xx281-02.reznum=2.8.1

set install=pref rel=xx281-02.rez

where xx is the prefix to the filename, as shown in the table on page 1. For example, to install the release on an AR440S router, use the commands:

enable rel=54281-02.reznum=2.8.1

set install=pref rel=54281-02.rez

Levels

Some of the issues addressed in this Maintenance Version include a level number. This number reflects the importance of the issue that has been resolved. The levels are:

Level 1 This issue will cause significant interruption to network services, and there is nowork-around.

Level 2 This issue will cause interruption to network service, however there is awork-around.

Level 3 This issue will seldom appear, and will cause minor inconvenience.

Level 4 This issue represents a cosmetic change and does not affect network operation.

Version 281-02

C613-10482-00REV B