Alliance Laundry Systems D355IE1B User Manual

Size:
2.49 Mb
Download

Stacked Dryer

Metered and Nonmetered

Electric and Gas Models

D355IE1B

NOTA: El manual en español aparece después del manual en inglés.

Operation and Installation

Part No. 504524R3

June 1998

KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. (If the dryer changes ownership, be sure this manual accompanies the dryer.)

WARNING

FOR YOUR SAFETY, the information in this manual must be followed to minimize the risk of fire or explosion or to prevent property damage, personal injury or death.W033

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

WHAT TO DO IF YOU SMELL GAS:

Do not try to light any appliance.

Do not touch any electrical switch; do not use any phone in your building.

Clear the room, building or area of all occupants.

Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

If you cannot reach your gas supplier, call the fire department.

Installation and service must be performed by a qualified installer, service agency or

the gas supplier.

W052

IMPORTANT: Purchaser must consult the local gas supplier for suggested instructions to be followed if the dryer user smells gas. The gas utility instructions plus the SAFETY and WARNING note directly above must be posted in a prominent location near the dryer for customer use.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

W053

504524

1

Table of

Contents

Replacement Parts ...............................................................................

2

Important Safety Instructions..............................................................

3

Roughing In Dimensions .....................................................................

5

Additional Security ..............................................................................

7

Slide Extension .....................................................................................

7

Timer Cams ...........................................................................................

7

Lower Front Panel Security ................................................................

7

Coin Slide Guards ................................................................................

8

Before You Start ...................................................................................

9

Installing the Dryer

 

STEP 1 – Position and Level the Dryer Unit..................................

10

STEP 2 – Connect Dryer Exhaust System .....................................

10

STEP 3 – Connect Gas Supply Pipe...............................................

11

STEP 4 – Connect Electrical Plug..................................................

12

STEP 5 – Wipe Out Inside of Each Dryer......................................

13

STEP 6 – Plug in the Dryer Unit ....................................................

13

STEP 7 – Check Installation...........................................................

13

Heat Source Check .............................................................................

14

Reversing Door Procedure ................................................................

15

Electrical Requirements (Electric Dryers) .......................................

16

Electrical Connection .........................................................................

17

Three-wirePower Cord .................................................................

17

Four-WirePower Cord ..................................................................

19

Electrical Requirements (Gas Dryers) .............................................

21

Gas Requirements .............................................................................

23

Location Requirements .....................................................................

24

Dryer Exhaust Requirements ...........................................................

25

Multi-DryerInstallation Exhuast Requirements.............................

28

Lint Filter.............................................................................................

31

Motor Overload Protector..................................................................

31

User-Maintenance Instructions .........................................................

32

For Energy Conservation ...................................................................

32

Before Your Call for Service...............................................................

33

Operation Instructions For Electromechanical Dryers ..................

34

Operation Instructions for Electronic Control Dryers ....................

36

Information for Handy Reference ....................................................

39

Installer Check ....................................................................

Back Cover

Replacement Parts . . .

If replacement parts are required, contact the source

Alliance Laundry Systems LLC

where you purchased your dryer, or contact

Shepard Street

 

P.O. Box 990

 

Ripon, WI 54971-0990

 

Phone:

 

(920) 748-3950

 

for the name and address of the nearest authorized parts

 

distributor.

©Copyright 1998, Alliance Laundry Systems LLC

All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the written permission of the publisher.

2

504524

IMPORTANT SAFETY INSTRUCTIONS

(SAVE THESE INSTRUCTIONS)

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using your dryer, follow these basic precautions:

W034

1.Read all instructions before using the dryer.

2.Refer to the GROUNDING INSTRUCTIONS in the INSTALLATION manual for the proper grounding of the dryer.

3.Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaningsolvents, other flammable or explosive substances as they give off vapors that could ignite or explode.

4.Do not allow children to play on or in the dryer. Close supervision of children is necessary when the dryer is used near children. This is a safety rule for all appliances.

5.Before the dryer is removed from service or discarded, remove the door to the drying compartment.

6.Do not reach into the dryer if the cylinder is revolving.

7.Do not install or store the dryer where it will be exposed to water and/or weather.

8.Do not tamper with the controls.

9.Do not repair or replace any part of the dryer, or attempt any servicing unless specifically recommended in the user-maintenanceinstructions or in publisheduser-repairinstructions that you understand and have the skills to carry out.

10.Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product.

11.To reduce the risk of fire, DO NOT DRY plastics or articles containing foam rubber or similarly textured rubberlike materials.

12.ALWAYS clean the lint filter after every load. A layer of lint in the filter reduces drying efficiency and prolongs drying time.

13.Keep area around the exhaust opening and adjacent surrounding area free from the accumulation of lint, dust and dirt.

14.The interior of the dryer and the exhaust duct should be cleaned periodically by qualified service personnel.

15.If not installed, operated and maintained in accordance with the manufacturer’s instructions or if there is damage to or mishandling of this product’s components, use of this product could expose you to substances in the fuel or from fuel combustion which can cause death or serious illness and which are known to the State of California to cause cancer, birth defects or other reproductive harm.

16.Dryer will not operate with the loading door open. DO NOT by-passthe door safety switch by permitting the dryer to operate with the door open. The dryer will stop tumbling when the door is opened. Do not use the dryer if it does not stop tumbling when the door is opened or starts tumbling without pressing the START mechanism. Remove the dryer from use and call the service person.

17.Do not put articles soiled with vegetable or cooking oil in the dryer, as these oils may not be removed during washing. Due to the remaining oil, the fabric may catch on fire by itself.

18.To reduce the risk of fire, DO NOT put clothes which have traces of any flammable substances such as machine oil, flammable chemicals, thinner, etc., or anything containing wax or chemicals such as in mops and cleaning cloths, or anything dry-cleanedat home with a drycleaning solvent in the dryer.

19.Use the dryer only for its intended purpose, drying clothes.

20.Always disconnect the electrical power to the dryer before attempting service. Disconnect the power cord by grasping the plug, not the cord.

21.Replace worn power cords and/or loose plugs.

22.Install this dryer according to the INSTALLATION INSTRUCTIONS. All connections for electrical power, grounding and gas supply must comply with local codes and be made by licensed personnel when required. Do not do it yourself unless you know how!

23.Remove laundry immediately after the dryer stops.

504524

3

24.Always read and follow manufacturer’s instructions on packages of laundry and cleaning aids. Heed all warnings or precautions. To reduce the risk of poisoning or chemical burns, keep them out of reach of children at all times (preferably in a locked cabinet).

25.Do not tumble fiber glass curtains and draperies unless the label says it can be done. If they are dried, wipe out the cylinder with a damp cloth to remove particles of fiber glass.

26.ALWAYS follow the fabric care instructions supplied by the garment manufacturer.

27.Never operate the dryer with any guards and/or panels removed.

28.DO NOT operate the dryer with missing or broken parts.

29.DO NOT by-passany safety devices.

30.Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage.

IMPORTANT: Solvent vapors from dry-cleaningmachines create acids when drawn through the heater of the drying unit. These acids are corrosive to the dryer as well as to the laundry load being dried. Be suremake-upair is free of solvent vapors.

IMPORTANT: Have your dryer installed properly. Don’t do it yourself unless you know how!

NOTE: The WARNING and IMPORTANT SAFETY INSTRUCTIONS appearing in this manual are not meant to cover all possible conditions and situations that may occur. Common sense, caution and care must be exercised when installing, maintaining, or operating the dryer.

Always contact your dealer, distributor, service agent or the manufacturer about any problems or conditions you do not understand.

4

504524

Roughing In Dimensions . . .

(Metered Models)

7.0"

 

cm)

 

(17.8 cm)

 

(194.3

 

 

 

(114.8cm)

 

(19.6 cm)

*76.5"

 

7.7"

 

*45.2"

 

(10.2 cm)

 

 

4.0"

 

 

23.5"

28.0"

 

 

(59.7 cm)

(71.1 cm)

 

 

* WITH LEVELING LEGS TURNED INTO BASE.

 

15.4"

4.0"

(39.1 cm)

 

(10.2 cm)

 

26.9"

 

(68.3 cm)

D350IE2A

 

ELECTRIC MODELS

7.0"

 

cm)

 

 

 

 

(17.8 cm)

 

(194.3

 

 

 

(114.8cm)

 

(19.6 cm)

*76.5"

 

7.7"

 

 

 

4.0"

 

*45.2"

 

 

 

 

(10.2 cm)

 

 

23.5"

28.0"

 

 

(59.7 cm)

(71.1 cm)

 

 

*WITH LEVELING LEGS TURNED INTO BASE.

4.0" (10.2 cm)

26.9" (68.3 cm)

15.4"

(110.5 cm)

43.5"

(39.1 cm)

 

2.8"

 

(7.1 cm)

 

3/8"

NPT GAS2.3" CONNECTION

(6 cm)

D351IE2A

GAS MODELS

NOTE: Side, rear and bottom exhaust openings are four inch (10.2 cm) ducting. Gas models cannot be vented out left side of cabinet because of burner housing.

IMPORTANT: The dryer should have sufficient clearance around it for needed ventilation and for the ease of installation and servicing. For maximum drying performance, we recommend that more clearance be allowed around the dryer than the clearances that are listed throughout this manual.

504524

5

Roughing In Dimensions . . .

(Nonmetered Models)

7.0"

cm)

 

 

(194.3

 

 

(17.8 cm)

 

 

 

 

 

 

*76.5"

(114.8cm)

 

 

7.7"

 

 

 

(19.6 cm)

*45.2"

 

 

4.0"

4.0"

 

 

 

(10.2 cm)

 

(10.2 cm)

23.5"

28.0"

 

26.9"

(59.7 cm)

(71.1 cm)

 

(68.3 cm)

*WITH LEVELING LEGS TURNED INTO BASE.

 

 

15.4" (39.1 cm)

D353IE2A

ELECTRIC MODELS

7.0"

 

cm)

 

 

(194.3*76.5"

cm)

(17.8 cm)

 

 

 

 

 

7.7"

 

(114.8

 

(19.6 cm)

 

 

 

 

 

4.0"

 

*45.2"

 

(10.2 cm)

 

 

 

 

23.5"

28.0"

 

 

(59.7 cm)

(71.1 cm)

 

 

*WITH LEVELING LEGS TURNED INTO BASE.

 

15.4"

(110.5 cm)

(10.2 cm)

43.5"

 

2.8"

4.0"

(39.1 cm)

 

 

(7.1 cm)

 

26.9"

 

3/8"

(68.3 cm)

 

NPT GAS

 

2.3" CONNECTION

 

(6 cm)

D352IE2A

GAS MODELS

NOTE: Side, rear and bottom exhaust openings are four inch (10.2 cm) ducting. Gas models cannot be vented out left side of cabinet because of burner housing.

IMPORTANT: The dryer should have sufficient clearance around it for needed ventilation and for the ease of installation and servicing. For maximum drying performance, we recommend that more clearance be allowed around the dryer than the clearances that are listed throughout this manual.

6

504524

Additional Security . . .

Torx security screws are available (as optional equipment at extra cost) for securing both lower access panels to each dryer base. Order part number 62853.

A Torx bit, part number 282P4, is available (as optional equipment at extra cost) for installing the Torx security screws.

A Torx bit holder, part number 24161, is available (as optional equipment at extra cost) to be used with the Torx bit.

Slide Extension . . .

(Metered Models)

Remove two slide extensions, four screws and lockwashers from the accesssories bag (located in lower cylinder) and install the extension on the top of the coin slide.

IMPORTANT: Slide extension must be attached to top side of the coin slides to make them long enough to activate the accumulator.

NOTE: This dryer unit, as shipped from the factory, does not include the coin slides, coin drawers, lock or keys. These coin slide kits (or parts) must be ordered, at extra cost, according to the purchaser’s requirements direct from the coin kit manufacturer of your choice.

Timer Cams . . .

(Metered Models)

The dryer timers are factory equipped with a 45 minute timing cam. If this drying time is not suitable to your installation, the following cams can be found in the accessories bag (located in lower cylinder).

ELECTRIC DRYERS

2-53242Cams (30 Minutes)

2-53240Cams (60 Minutes)

GAS DRYERS

2-53242Cams (30 Minutes)

A 60 minute timing cam, Part No. 53240, is available for the gas dryers as optional equipment at extra cost.

Lower Front Panel Security . . .

(Optional)

(Metered Models)

For added security, remove the two screws (with lockwashers) from accessories bag (located in lower cylinder). Install screws as follows:

1.Unlock control panel.

2.Lift up on control panel and swing bottom of panel out, then pull down and away from control cabinet.

3.Install the two screws down through holes in lower flange of control cabinet and into top flange of lower front panel.

504524

7

Coin Slide Guards . . .

(Metered Models)

Using serrated hex head screws from accessories bag (located in lower cylinder), install coin slide guards (located in accessories bag in lower cylinder), to front of dryer’s control cabinet. See illustration below.

A special security screw kit is available (as optional equipment at extra cost) for securing the two coin slide

guards and both front panels to front of dryer unit. Order Security Kit No. 298P3. A special driver, part number 56217, is available (as optional equipment at extra cost) for installing the special security screws.

COIN

 

COIN

SLIDE

 

GUARD

 

SLIDE

 

 

GUARD

 

PERM PRESS

DELICATE

 

NORMAL

FLUFF

 

 

(NO HEAT)

 

IN USE

 

 

FABRIC SELECTOR

 

PUSH TO START

PUSH TO START

 

PERM PRESS

DELICATE

IN USE

 

 

NORMAL

FLUFF

 

(NO HEAT)

FABRIC SELECTOR

SERRATED

SERRATED

HEX HEAD

HEX HEAD

SCREWS

SCREWS

 

 

D193IE3A

NOTE: Coin slides and coin drawers are shown for illustration only. You must obtain them locally.

8

504524