Alliance Laundry Systems B-Series User Manual

Size:
456.46 Kb
Download

Washer-Extractors

Cabinet Hardmount B-SeriesMicrocomputer for OPL Models 2 Speed andVariable-Speed

Refer to Page 5 for Model Identification

NOTA: El manual en español aparece después del manual en inglés.

CHM166C

Keep These Instructions for Future Reference.

(If this machine changes ownership, this manual must accompany machine.)

 

 

 

www.comlaundry.com

Part No. F232219R1

 

 

 

 

 

 

November 2005

Operation/Maintenance

Table of

Contents

Safety Information..............................................................................

3

Explanation of Safety Messages...........................................................

3

Important Safety Instructions ...............................................................

3

Introduction.........................................................................................

5

Model Identification .............................................................................

5

Introduction...........................................................................................

5

Electronic Control Unit.........................................................................

5

Control Output Fuse Board...................................................................

6

Harnessing........................................................................................

6

Nameplate Location..............................................................................

7

Replacement Parts ................................................................................

7

Customer Service..................................................................................

7

Summary of Control Outputs and Inputs..............................................

7

Outputs.............................................................................................

7

Inputs................................................................................................

7

Control Voltage................................................................................

7

Operation.............................................................................................

9

Control Panel ........................................................................................

9

Summary of Major Features .................................................................

10

Display Indicators.................................................................................

11

Operating Instructions ..........................................................................

13

Maintenance ........................................................................................

15

Daily .....................................................................................................

15

Beginning of Day .............................................................................

15

End of Day .......................................................................................

15

Weekly..................................................................................................

16

Monthly.................................................................................................

16

Quarterly ...............................................................................................

19

Care of Stainless Steel ..........................................................................

20

© Copyright 2005, Alliance Laundry Systems LLC

All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher.

F232219

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

1

Notes

2

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

F232219

Safety Information

Explanation of Safety Messages

Precautionary statements (“DANGER,” “WARNING” and “CAUTION”), followed by specific instructions, are found in this manual and on machine decals. These precautions are intended for the personal safety of the operator, user, servicer and those maintaining the machine.

DANGER

DANGER indicates the presence of a hazard that will cause severe personal injury, death, or substantial property damage if the danger is ignored.

WARNING

WARNING indicates the presence of a hazard that can cause severe personal injury, death, or substantial property damage if the warning is ignored.

CAUTION

CAUTION indicates the presence of a hazard that will or can cause minor personal injury or property damage if the caution is ignored.

Additional precautionary statements (“IMPORTANT” and “NOTE”) are followed by specific instructions.

IMPORTANT: The word “IMPORTANT” is used to inform the reader of specific procedures where minor machine damage will occur if the procedure is not followed.

NOTE: The word “NOTE” is used to communicate installation, operation, maintenance or servicing information that is important but not hazard related.

Important Safety Instructions

WARNING

To reduce the risk of fire, electric shock, serious injury or death to persons when using your washer, follow these basic precautions:

W023

1.Read all instructions before using the washer.

2.Refer to the GROUNDING INSTRUCTIONS in the INSTALLATION manual for the proper grounding of the washer.

3.Do not wash textiles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, kerosene, waxes, cooking oils, drycleaning solvents, or other flammable or explosive substances as they give off vapors that could ignite or explode.

4.Do not add gasoline, dry-cleaningsolvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.

5.Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using a washing machine or combination washer-dryer,turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. The gas is flammable; do not smoke or use an open flame during this time.

6.Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children. This is a safety rule for all appliances.

7.Before the washer is removed from service or discarded, remove the door to the washing compartment.

8.Do not reach into the washer if the wash drum is moving.

F232219

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

3

Safety Information

9.Do not install or store the washer where it will be exposed to water and/or weather.

10.Do not tamper with the controls.

11.Do not repair or replace any part of the washer, or attempt any servicing unless specifically recommended in the user-maintenanceinstructions or in publisheduser-repairinstructions that the user understands and has the skills to carry out.

12.To reduce the risk of an electric shock or fire, DO NOT use an extension cord or an adapter to connect the washer to the electrical power source.

13.Use washer only for its intended purpose, washing textiles.

14.ALWAYS disconnect the washer from electrical supply before attempting any service. Disconnect the power cord by grasping the plug, not the cord.

15.Install the washer according to the INSTALLATION INSTRUCTIONS. All connections for water, drain, electrical power and grounding must comply with local codes and be made by licensed personnel when required.

16.To reduce the risk of fire, textiles which have traces of any flammable substances such as vegetable oil, cooking oil, machine oil, flammable chemicals, thinner, etc. or anything containing wax or chemicals such as in mops and cleaning cloths, must not be put into the washer. These flammable substances may cause the fabric to catch on fire by itself.

17.Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product.

18.Keep washer in good condition. Bumping or dropping the washer can damage safety features. If this occurs, have washer checked by a qualified service person.

19.Replace worn power cords and/or loose plugs.

20.Be sure water connections have a shut-offvalve and that fill hose connections are tight. CLOSE theshut-offvalves at the end of each wash day.

21.Loading door MUST BE CLOSED any time the washer is to fill, tumble or spin. DO NOT bypass the loading door switch by permitting the washer to operate with the loading door open.

22.Always read and follow manufacturer’s instructions on packages of laundry and cleaning aids. Heed all warnings or precautions. To reduce the risk of poisoning or chemical burns, keep them out of the reach of children at all times (preferably in a locked cabinet).

23.Always follow the fabric care instructions supplied by the textile manufacturer.

24.Never operate the washer with any guards and/or panels removed.

25.DO NOT operate the washer with missing or broken parts.

26.DO NOT bypass any safety devices.

27.Failure to install, maintain, and/or operate this washer according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage.

NOTE: The WARNINGS and IMPORTANT SAFETY INSTRUCTIONS appearing in this manual are not meant to cover all possible conditions and situations that may occur. Common sense, caution and care must be exercised when installing, maintaining, or operating the washer.

Any problems or conditions not understood should be reported to the dealer, distributor, service agent or the manufacturer.

4

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

F232219

Introduction

Model Identification

Information in this manual is applicable to these models:

HC20BN2

HC50BN2

HC80BNV

SC40BN2

SC60BNF

UC30BN2

UC60BN2

 

 

 

 

 

 

 

HC30BN2

HC60BN2

SC20BN2

SC50BN2

SC80BNV

UC40BN2

UC60BNF

 

 

 

 

 

 

 

HC40BN2

HC60BNF

SC30BN2

SC60BN2

UC20BN2

UC50BN2

UC80BNV

 

 

 

 

 

 

 

Introduction

The “B” electronic control is composed of the electronic control unit and the control fuse board with wiring harness. Only an authorized person should look inside the machine. First TURN OFF POWER, open lid and remove any cover present. Make sure door lock circuit has fully discharged. The door unlock capacitor can retain high electrical charge, even when the machine’s electrical inputs are disconnected, until it has discharged. Some machines are equipped with an “amber” indicator light facing upward in the control compartment. If this is on, wait until it goes off (indicating when high voltage in the door lock circuit has discharged).

Electronic Control Unit

This portion of the control contains the “intelligence” – the micro-controllerand the miscellaneous components on the printed circuit (PC) board. The board has a metal cover, which MUST be in place at all times during machine operation. Operation of the machine without this cover installed will void the warranty.

The control unit monitors and responds to input, gives information about the status of the washer and monitors and responds to inputs from the user interface (keypad). The control provides signals to the control output unit, which in turn operates the components that control the machine functions. This is located behind the machine control panel.

F232219

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

5

Introduction

Control Output Fuse Board

This portion of the control contains the power supply for the control unit, and also the switching devices which power the components in the machine, all of which are on the output PC board. The switching devices are controlled by the control unit, and are solid state.

Harnessing

Wiring harnesses are modular – harnesses common to various configurations are similar, while those specific to a certain configuration can be added. There are harnesses for inputs to the control unit, for outputs from the control power/output unit to the machine components, and for the main incoming power to the control power/output unit.

6

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

F232219

Nameplate Location

The nameplate is located at the rear of the machine and inside door. Always provide the machine’s serial number and model number when ordering parts or when seeking technical assistance.

 

1

 

CHM2060N

1

Nameplate

Figure 1

Replacement Parts

If literature or replacement parts are required, contact the source from whom the machine was purchased or contact Alliance Laundry Systems at (920) 748-3950for the name and address of the nearest authorized parts distributor.

Customer Service

For technical assistance, call: (920) 748-3121Ripon, Wisconsin.

Introduction

Summary of Control Outputs and

Inputs

Outputs

General outputs provide signals to operate the following components.

1.Hot Fill Valve

2.Cold Fill Valve

3.Drain Valve (normally open)

4.Door Lock Solenoid Coil

5.Door Unlock Solenoid Coil

6.Supply 1 (detergent)

7.Supply 2 (bleach)

8.Supply 3 (sour/softener)

9.Supply 4

10.Supply 5 or Optional 3rd (auxiliary) Fill Inlet (governed by the configuration settings)

11.Optional Heat

For standard models, the components for outputs shown as “optional” will not be populated on the output printed circuit board.

AC outputs are solid state outputs that operate either 120 Volt AC or 220 Volt AC (nominal voltage) components, depending on the control voltage configuration. Outputs are fused appropriately.

Inputs

1.Low Water Level

2.Medium Water Level

3.High Water Level

4.Door

5.Temperature Signal (only for machines with heat option)

Control Voltage

The control power supply can be configured to operate on 110 Volt AC nominal RMS input voltage

50/60 Hertz, OR 220 Volt AC nominal RMS input voltage 50/60 Hertz.

F232219

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

7

Introduction

Model Number Familiarization Guide

Sample Model Number: *C60BN2OU60001

*C Model Number Prefix

60

Washer-ExtractorCapacity (pounds dry weight of laundry)

 

 

B

Type of Electrical Control (B = B - Control)

 

 

N

Actuation (N = Non-Coin)

2 Washer-ExtractorSpeed Capability (2 = 2 speed)

O

Electrical Characteristics

U6 Design Series

0001 Option Identification (varies from machine to machine)

* Denotes Brand

 

*C60BN2OU60001

 

 

 

00000000000

 

 

 

208 – 240

7

 

 

3

 

 

60

3

3

 

 

60

18

470

 

N/A

N/A

0

 

500000

 

 

 

EXAMPLE OF NAMEPLATE

CHM487R

 

 

 

 

 

 

CHM487R

Figure 2

8

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

F232219