Alliance Laundry Systems 512685R2 User Manual

Size:
2.54 Mb
Download

Stacked

Clothes Dryer

Nonmetered and Metered

Electric and Gas Models

Installation/Operation

Para bajar una copia de estas instrucciones

 

en español, visite www.comlaundry.com.

D009C

Keep These Instructions for Future Reference.

(If this machine changes ownership, this manual must accompany machine.)

www.comlaundry.com

Part No. 512685R2

July 2007

WARNING

FOR YOUR SAFETY, the information in this manual must be followed to minimize the risk of fire or explosion or to prevent property damage, personal injury or death.

W033

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

WHAT TO DO IF YOU SMELL GAS:

Do not try to light any appliance.

Do not touch any electrical switch; do not use any phone in your building.

Clear the room, building or area of all occupants.

Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

If you cannot reach your gas supplier, call the fire department.

Installation and service must be performed by a qualified installer, service agency or the gas supplier.

W052

IMPORTANT: Purchaser must consult the local gas supplier for suggested instructions to be followed if the dryer user smells gas. The gas utility instructions plus the SAFETY and WARNING note directly above must be posted in a prominent location near the dryer for customer use.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

W053

The following information applies to the state of Massachusetts, USA.

This appliance can only be installed by a Massachusetts licensed plumber or gas fitter.

This appliance must be installed with a 36 inch (91 cm) long flexible gas connector.

A “T-Handle”type gasshut-offvalve must be installed in the gas supply line to this appliance.

This appliance must not be installed in a bedroom or bathroom.

512685

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

1

 

Safety Information..............................................................................

4

Table of

Explanation of Safety Messages...........................................................

4

Contents

Installation...........................................................................................

6

 

Important Safety Instructions ...............................................................

4

 

Nonmetered Models.........................................................................

6

 

Metered Models ...............................................................................

7

 

Before You Start ...................................................................................

8

 

Tools ................................................................................................

8

 

Additional Security...............................................................................

8

 

Installing the Dryer ...............................................................................

9

 

Step 1: Position and Level the Dryer ...............................................

9

 

Step 2: Connect Dryer Unit Exhaust System...................................

10

 

Exhaust Direction.............................................................................

12

 

Exhaust System................................................................................

12

 

Multi-Dryer Installation Exhaust Requirements..............................

13

 

Step 3: (Gas Dryer Only) Connect Gas Supply Pipe .......................

15

 

Step 4: (Electric Dryer Only) Connect Electrical Plug....................

16

 

Step 5: Reverse Door, if Desired .....................................................

22

 

Step 6: Wipe Out Inside of Dryer ....................................................

23

 

Step 7: Plug In the Dryer .................................................................

23

 

Step 8: Recheck Steps 1-7................................................................

24

 

Step 9: Check Heat Source ..............................................................

24

 

Vending................................................................................................

26

 

Coin Slide Guards.................................................................................

26

 

Coin Slide Control ................................................................................

26

 

Power-Up Mode...............................................................................

26

 

Ready Mode .....................................................................................

26

 

Start Mode........................................................................................

26

 

Run Mode.........................................................................................

26

 

Door Open Mode .............................................................................

26

 

End of Cycle Mode ..........................................................................

26

 

Topoffs.............................................................................................

27

 

Temperature Selector Switch...........................................................

27

 

Error Display Mode .........................................................................

27

 

Setting Dry Time Dipswitches..............................................................

27

 

Dipswitch Settings ................................................................................

28

 

Test Setting ......................................................................................

30

 

Slide Extension .....................................................................................

31

 

Operation.............................................................................................

33

 

Operation Instructions for Nonmetered and Coin Slide Dryers ...........

33

 

Step 1: Clean Lint Filter...................................................................

33

 

Step 2: Load Laundry.......................................................................

33

 

Step 3: Close Loading Door.............................................................

33

 

Step 4: Determine Proper Dryer ......................................................

34

 

Step 5: Set Fabric Selector...............................................................

34

 

Step 6: Start Dryer ...........................................................................

34

© Copyright 2007, Alliance Laundry Systems LLC

All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher.

2

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

512685

Operation

Instructions for Electronic Display Control Dryers

............. 35

Step 1: Clean Lint Filter...................................................................

35

Step 2: Load Laundry.......................................................................

35

Step 3: Close Loading Door.............................................................

35

Step 4: Determine Proper Dryer ......................................................

35

Step 5: Set Fabric Selector...............................................................

36

Step 6: Insert Coin(s) or Card ..........................................................

36

Step 7: Start Dryer ...........................................................................

37

Indicator Lights................................................................................

37

Operation Instructions for MDC Dryers...............................................

38

Step 1: Clean Lint Filter...................................................................

38

Step 2: Load Laundry.......................................................................

38

Step 3: Close Loading Door.............................................................

38

Step 4: Determine Proper Dryer ......................................................

38

Step 5: Set Fabric Selector...............................................................

38

Step 6: Insert Coin(s) or Card ..........................................................

39

Step 7: Start Dryer ...........................................................................

39

Indicator Lights................................................................................

39

Operation Instructions for NetMaster Dryers .......................................

40

Step 1: Clean Lint Filter...................................................................

40

Step 2: Load Laundry.......................................................................

40

Step 3: Close Loading Door.............................................................

40

Step 4: Determine Proper Dryer ......................................................

40

Step 5: Set Fabric Selector...............................................................

41

Step 6: Insert Coin(s) or Card ..........................................................

41

Step 7: Start Dryer ...........................................................................

41

Indicator Lights................................................................................

42

Maintenance ........................................................................................

43

Lubrication............................................................................................

43

Care of Your Dryer...............................................................................

43

Dryer Interior ...................................................................................

43

Cabinet .............................................................................................

43

Control Panel ...................................................................................

43

Exhaust System................................................................................

43

Lint Filter

..............................................................................................

44

Motor Overload Protector.....................................................................

44

For Energy ......................................................................Conservation

44

Troubleshooting ..................................................................................

45

Contact Information...........................................................................

46

Installer Checklist...............................................................

Back Cover

512685

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

3

Safety Information

Explanation of Safety Messages

Throughout this manual and on machine decals, you will find precautionary statements (“DANGER,” “WARNING,” and “CAUTION”) followed by specific instructions. These precautions are intended for the personal safety of the operator, user, servicer, and those maintaining the machine.

DANGER

Indicates an imminently hazardous situation that, if not avoided, will cause severe personal injury or death.

WARNING

Indicates a hazardous situation that, if not avoided, could cause severe personal injury or death.

CAUTION

Indicates a hazardous situation that, if not avoided, may cause minor or moderate personal injury or property damage.

Additional precautionary statements (“IMPORTANT” and “NOTE”) are followed by specific instructions.

IMPORTANT: The word “IMPORTANT” is used to inform the reader of specific procedures where minor machine damage will occur if the procedure is not followed.

NOTE: The word “NOTE” is used to communicate installation, operation, maintenance or servicing information that is important but not hazard related.

Important Safety Instructions

Save These Instructions

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using your dryer, follow these basic precautions:

W034

1.Read all instructions before using the dryer.

2.Refer to the GROUNDING INSTRUCTIONS in the INSTALLATION manual for the proper grounding of the dryer.

3.Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaningsolvents, other flammable or explosive substances as they give off vapors that could ignite or explode.

4.Do not allow children to play on or in the dryer. Close supervision of children is necessary when the dryer is used near children. This is a safety rule for all appliances.

5.Before the dryer is removed from service or discarded, remove the door to the drying compartment.

6.Do not reach into the dryer if the cylinder is revolving.

7.Do not install or store the dryer where it will be exposed to water and/or weather.

8.Do not tamper with the controls.

9.Do not repair or replace any part of the dryer, or attempt any servicing unless specifically recommended in the user-maintenanceinstructions or in publisheduser-repairinstructions that you understand and have the skills to carry out.

10.Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product.

11.To reduce the risk of fire, DO NOT DRY plastics or articles containing foam rubber or similarly textured rubberlike materials.

12.ALWAYS clean the lint filter after every load. A layer of lint in the filter reduces drying efficiency and prolongs drying time.

4

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

512685

13.Keep area around the exhaust opening and adjacent surrounding area free from the accumulation of lint, dust and dirt.

14.The interior of the dryer and the exhaust duct should be cleaned periodically by qualified service personnel.

15.If not installed, operated and maintained in accordance with the manufacturer’s instructions or if there is damage to or mishandling of this product’s components, use of this product could expose you to substances in the fuel or from fuel combustion which can cause death or serious illness and which are known to the State of California to cause cancer, birth defects or other reproductive harm.

16.Dryer will not operate with the loading door open. DO NOT bypass the door safety switch by permitting the dryer to operate with the door open. The dryer will stop tumbling when the door is opened. Do not use the dryer if it does not stop tumbling when the door is opened or starts tumbling without pressing the START mechanism. Remove the dryer from use and call the service person.

17.Do not put articles soiled with vegetable or cooking oil in the dryer, as these oils may not be removed during washing. Due to the remaining oil, the fabric may catch on fire by itself.

18.To reduce the risk of fire, DO NOT put clothes which have traces of any flammable substances such as machine oil, flammable chemicals, thinner, etc., or anything containing wax or chemicals such as in mops and cleaning cloths, or anything dry-cleanedat home with a drycleaning solvent in the dryer.

19.Use the dryer only for its intended purpose, drying clothes.

20.Always disconnect the electrical power to the dryer before attempting service. Disconnect the power cord by grasping the plug, not the cord.

21.If supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

Safety Information

22.Install this dryer according to the INSTALLATION INSTRUCTIONS. All connections for electrical power, grounding and gas supply must comply with local codes and be made by licensed personnel when required. Do not do it yourself unless you know how!

23.Remove laundry immediately after the dryer stops.

24.Always read and follow manufacturer’s instructions on packages of laundry and cleaning aids. Heed all warnings or precautions. To reduce the risk of poisoning or chemical burns, keep them out of reach of children at all times (preferably in a locked cabinet).

25.Do not tumble fiberglass curtains and draperies unless the label says it can be done. If they are dried, wipe out the cylinder with a damp cloth to remove particles of fiberglass.

26.ALWAYS follow the fabric care instructions supplied by the garment manufacturer.

27.Never operate the dryer with any guards and/or panels removed.

28.DO NOT operate the dryer with missing or broken parts.

29.DO NOT bypass any safety devices.

30.DO NOT operate dryers if the units have been separated.

31.Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage.

IMPORTANT: Solvent vapors from dry-cleaningmachines create acids when drawn through the heater of the drying unit. These acids are corrosive to the dryer as well as to the laundry load being dried. Be suremake-upair is free of solvent vapors.

IMPORTANT: Have your dryer installed properly. Don’t do it yourself unless you know how!

NOTE: The WARNING and IMPORTANT SAFETY INSTRUCTIONS appearing in this manual are not meant to cover all possible conditions and situations that may occur. Common sense, caution and care must be exercised when installing, maintaining, or operating the dryer.

Always contact your dealer, distributor, service agent or the manufacturer about any problems or conditions you do not understand.

512685

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

5

Installation

Nonmetered Models

7 in.

cm)

 

(17.8 cm)

(194.3

 

 

 

 

*76.5 in.

(113.8cm)

 

8 in.

 

 

(20.3 cm)

*44.8 in.

 

4.5 in.

 

 

 

(11.4 cm)

 

23.5 in.

28 in.

 

(59.7 cm)

(71.1 cm)

 

*With leveling legs turned into base.

15.5 in. (39.4 cm)

(100 cm)

 

in.

4 in.

*39.38

 

(10.2 cm)

 

26.9 in.

 

(68.3 cm)

*15.44 in.

 

 

(39.2 cm)

ELECTRIC MODELS

DRY2104N

 

 

DRY2104N

7 in.

 

cm)

 

 

 

 

 

 

(194.3

 

 

 

 

 

(17.8 cm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

in.

 

 

 

 

 

 

 

 

*44.8 in. (113.8 cm)

15.5 in.

*43.5 in. (110.5 cm)

 

*39.38 in. (100 cm)

 

 

8 in.

(39.4 cm)

 

 

 

 

 

 

 

(20.3 cm)

 

 

 

 

4.5 in.

4 in.

 

 

 

(11.4 cm)

(10.2 cm)

 

 

 

*76.5

 

 

 

23.5 in.

28 in.

 

2.3 in.

 

 

 

 

(59.7 cm)

(71.1 cm)

 

(6 cm)

 

*15.44 in.

1

 

 

 

 

26.9 in.

 

 

 

 

 

 

(39.2 cm)

 

 

 

 

(68.3 cm)

 

2.8 in.

DRY2105N

 

 

 

 

 

 

(7.1 cm)

 

 

 

 

 

 

 

 

 

 

 

GAS MODELS

 

 

 

 

 

 

 

 

 

 

DRY2105N

*With leveling legs turned into base.

 

 

 

 

 

1

3/8 in. N.P.T. Gas Connection

 

 

 

 

 

6

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

512685

Installation

Metered Models

7 in.

(17.8 cm)

8 in.

(20.3 cm)

4.5 in.

(11.4 cm)

 

 

 

 

 

23.5 in.

 

 

 

 

 

 

28 in.

(59.7 cm)

 

 

 

(71.1 cm)

 

 

 

 

 

*With leveling legs turned into base.

*76.5 in. (194.3 cm)

(113.8 cm)

 

*44.8 in.

cm)

SlideCoinModels in.*39.38(100 cm) ControlElectronicModels in.*36.94(93.8 cm)

15.5 in. (39.4

4 in.

 

(10.2 cm)

 

26.9 in.

 

(68.3 cm)

*15.44 in.

 

(39.2 cm)

ELECTRIC MODELS

DRY2102N

DRY2102N

NOTE: Not all models have windows.

7 in.

cm)

 

(194.3in.

 

(17.8 cm)

 

 

 

 

*76.5

(113.8cm)

 

8 in.

 

 

(20.3 cm)

in.

 

 

 

4.5 in.

*44.8

 

 

 

(11.4 cm)

 

23.5 in.

28 in.

 

(59.7 cm)

(71.1 cm)

 

*With leveling legs turned into base.

1 3/8 in. N.P.T. Gas Connection

15.5 in.

(110.5in.*43.5cm)

 

ModelsSlideCoin

cm)(100in.*39.38

ModelsControlElectronic

cm)(93.8in.*36.94

 

 

 

 

 

 

(39.4 cm)

 

 

 

 

 

 

4 in.

 

 

 

 

 

 

(10.2 cm)

 

 

 

 

 

 

 

2.3 in.

 

 

 

 

 

 

(6 cm)

*15.44 in.

1

 

 

 

 

26.9 in.

 

 

 

 

(39.2 cm)

 

 

 

 

 

 

 

 

 

(68.3 cm)

2.8 in.

DRY2103N

 

 

 

 

 

(7.1 cm)

 

 

 

 

 

 

 

 

 

GAS MODELS

DRY2103N

NOTE: Not all models have windows.

NOTE: Side, rear and bottom exhaust openings are 4 inch (10.2 cm) ducting. Gas models cannot be vented out left side of cabinet because of burner housing.

IMPORTANT: The dryer should have sufficient clearance around it for needed ventilation and for the ease of installation and servicing. For maximum drying performance, we recommend that more clearance be allowed around the dryer than the clearances that are listed throughout this manual.

512685

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

7

Installation

Before You Start

Tools

For most installations, the basic tools you will need are:

 

1

2

 

 

3

 

5

4

 

 

D818I

1

Wrench

 

2

Screwdrivers

 

3

Level

 

4

Teflon Tape

 

5

Duct Tape

 

Figure 1

NOTE: An 8 in. (20.32 cm) coin drawer is required for coin operated MDC and NetMaster models.

Additional Security

Torx security screws are available (as optional equipment at extra cost) for securing both lower access panels to each dryer base. Order Part No. 62853.

A Torx bit, Part No. 282P4, is available (as optional equipment at extra cost) for installing the Torx security screws.

A Torx bit holder, Part No. 24161, is available (as optional equipment at extra cost) to be used with the Torx bit.

WARNING

Any disassembly requiring the use of tools must be performed by a suitably qualified service person.

W299

8

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

512685