Alliance Laundry Systems 33 User Manual

Size:
1.63 Mb
Download

Washer-Extractors

Cabinet Freestanding

Refer to Page 6 for Model Identification

CFD15C

33, 40, 55 and 75 Models

CFD19C

CFD19C

18, 25 and 35 Models

CFD20C

100, 135, 165 and 200 ModelsCFD20

Keep These Instructions for Future Reference.

(If this machine changes ownership, this manual must accompany machine.)

 

 

 

www.comlaundry.com

Part No. 9001000R13

 

 

 

 

 

 

July 2010

Installation

Table of

Contents

Safety Information..............................................................................

2

Explanation of Safety Messages...........................................................

2

Important Safety Instructions ...............................................................

2

Safety Decals ........................................................................................

4

Operator Safety.....................................................................................

5

Introduction.........................................................................................

6

Model Identification .............................................................................

6

Nameplate Location..............................................................................

8

Replacement Parts ................................................................................

8

Customer Service..................................................................................

8

Specifications and Dimensions...........................................................

10

Installation...........................................................................................

25

Dimensional Clearances...................................................................

25

Machine Foundation ........................................................................

26

Mechanical Installation.........................................................................

27

Frame Dimensions and Mounting Bolt Location.............................

27

Mounting Bolt Installation (If Required)..............................................

41

Removing the Transport Brackets ........................................................

42

Drain Connection..................................................................................

44

Water Connection .................................................................................

46

Electrical Installation ............................................................................

47

Electrical Connection............................................................................

50

Remote Liquid Supply Connection ......................................................

50

Chemical Injection Supply System..................................................

50

Steam Requirements (Steam Heat Option Only)..................................

51

Supply Programming Table .............................................................

52

Supply Relay Configuration (No Wiring)........................................

52

Primary 220 Volt Remote Liquid Supply Connection.....................

52

Out-of-Balance Switch .........................................................................

54

Automatic Lubricator............................................................................

54

Control Function Test ...........................................................................

55

© Copyright 2010, Alliance Laundry Systems LLC

All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher.

9001000

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

1

Safety Information

Explanation of Safety Messages

Precautionary statements (“DANGER,” “WARNING,” and “CAUTION”), followed by specific instructions, are found in this manual and on machine decals. These precautions are intended for the personal safety of the operator, user, servicer, and those maintaining the machine.

DANGER

DANGER indicates the presence of a hazard that will cause severe personal injury, death, or substantial property damage if the danger is ignored.

WARNING

WARNING indicates the presence of a hazard that can cause severe personal injury, death, or substantial property damage if the warning is ignored.

CAUTION

CAUTION indicates the presence of a hazard that will or can cause minor personal injury or property damage if the caution is ignored.

Additional precautionary statements (“IMPORTANT” and “NOTE”) are followed by specific instructions.

IMPORTANT: The word “IMPORTANT” is used to inform the reader of specific procedures where minor machine damage will occur if the procedure is not followed.

NOTE: The word “NOTE” is used to communicate installation, operation, maintenance or servicing information that is important but not hazard related.

Important Safety Instructions

WARNING

To reduce the risk of fire, electric shock, serious injury or death to persons when using your washer, follow these basic precautions:

W023

1.Read all instructions before using the washer.

2.Refer to the GROUNDING INSTRUCTIONS in the INSTALLATION manual for the proper grounding of the washer.

3.Do not wash textiles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, kerosene, waxes, cooking oils, drycleaning solvents, or other flammable or explosive substances as they give off vapors that could ignite or explode.

4.Do not add gasoline, dry-cleaningsolvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.

5.Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using a washing machine or combination washer-dryer,turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. The gas is flammable, do not smoke or use an open flame during this time.

6.Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children. This is a safety rule for all appliances.

7.Before the washer is removed from service or discarded, remove the door to the washing compartment.

8.Do not reach into the washer if the wash drum is moving.

2

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

9001000

9.Do not install or store the washer where it will be exposed to water and/or weather.

10.Do not tamper with the controls.

11.Do not repair or replace any part of the washer, or attempt any servicing unless specifically recommended in the user-maintenanceinstructions or in publisheduser-repairinstructions that the user understands and has the skills to carry out.

12.To reduce the risk of an electric shock or fire, DO NOT use an extension cord or an adapter to connect the washer to the electrical power source.

13.Use washer only for its intended purpose, washing textiles.

14.Never wash machine parts or automotive parts in the machine. This could result in serious damage to the basket.

15.ALWAYS disconnect the washer from electrical supply before attempting any service. Disconnect the power cord by grasping the plug, not the cord.

16.Install the washer according to the INSTALLATION INSTRUCTIONS. All connections for water, drain, electrical power and grounding must comply with local codes and be made by licensed personnel when required.

17.To reduce the risk of fire, textiles which have traces of any flammable substances such as vegetable oil, cooking oil, machine oil, flammable chemicals, thinner, etc., or anything containing wax or chemicals such as in mops and cleaning cloths, must not be put into the washer. These flammable substances may cause the fabric to catch on fire by itself.

18.Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product.

19.Keep washer in good condition. Bumping or dropping the washer can damage safety features. If this occurs, have washer checked by a qualified service person.

Safety Information

20.If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

21.Be sure water connections have a shut-offvalve and that fill hose connections are tight. CLOSE theshut-offvalves at the end of each wash day.

22.Loading door MUST BE CLOSED any time the washer is to fill, tumble or spin. DO NOT bypass the loading door switch by permitting the washer to operate with the loading door open.

23.Always read and follow manufacturer’s instructions on packages of laundry and cleaning aids. Heed all warnings or precautions. To reduce the risk of poisoning or chemical burns, keep them out of the reach of children at all times (preferably in a locked cabinet).

24.Always follow the fabric care instructions supplied by the textile manufacturer.

25.Never operate the washer with any guards and/or panels removed.

26.DO NOT operate the washer with missing or broken parts.

27.DO NOT bypass any safety devices.

28.Failure to install, maintain, and/or operate this washer according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage.

NOTE: The WARNINGS and IMPORTANT SAFETY INSTRUCTIONS appearing in this manual are not meant to cover all possible conditions and situations that may occur. Common sense, caution and care must be exercised when installing, maintaining, or operating the washer.

Any problems or conditions not understood should be reported to the dealer, distributor, service agent or the manufacturer.

9001000

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

3

Safety Information

WARNING

This machine must be installed, adjusted, and serviced by qualified electrical maintenance personnel familiar with the construction and operation of this type of machinery. They must also be familiar with the potential hazards involved. Failure to observe this warning may result in personal injury and/or equipment damage, and may void the warranty.

SW004

IMPORTANT: Ensure that the recommended clearances for inspection and maintenance are provided. Never allow the inspection and maintenance space to be blocked.

WARNING

Install the machine on a level floor of sufficient strength. Failure to do so may result in conditions which can produce serious injury, death and/or property damage.

W703

CAUTION

Be careful around the open door, particularly when loading from a level below the door. Impact with door edges can cause personal injury.

SW025

WARNING

Never touch internal or external steam pipes, connections, or components. These surfaces can be extremely hot and will cause severe burns. The steam must be turned off and the pipe, connections, and components allowed to cool before the pipe can be touched.

SW014

Safety Decals

Safety decals appear at crucial locations on the machine. Failure to maintain legible safety decals could result in injury to the operator or service technician.

To provide personal safety and keep the machine in proper working order, follow all maintenance and safety procedures presented in this manual. If questions regarding safety arise, contact the manufacturer immediately.

Use manufacturer-authorizedspare parts to avoid safety hazards.

4

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

9001000

Operator Safety

WARNING

NEVER insert hands or objects into basket until it has completely stopped. Doing so could result in serious injury.

SW012

To ensure the safety of machine operators, the following maintenance checks must be performed daily:

1.Prior to operating the machine, verify that all warning signs are present and legible. Missing or illegible signs must be replaced immediately. Make certain that spares are available.

2.Check door interlock before starting operation of the machine:

a.Attempt to start the machine with the door open. The machine should not start with the door open.

b.Close the door without locking it and attempt to start the machine. The machine should not start with the door unlocked.

c.Close and lock the door and start a cycle. Attempt to open the door while the cycle is in progress. The door should not open.

If the door lock and interlock are not functioning properly, call a service technician.

3.Do not attempt to operate the machine if any of the following conditions are present:

a.The door does not remain securely locked during the entire cycle.

b.Excessively high water level is evident.

c.Machine is not connected to a properly grounded circuit.

Safety Information

Do not bypass any safety devices in the machine.

WARNING

Never operate the machine with a bypassed or disconnected balance system. Operating the machine with severe out-of-balanceloads could result in personal injury and serious equipment damage.

SW039

9001000

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

5

Introduction

Model Identification

Information in this manual is applicable to these models:

 

 

 

 

 

 

 

 

HX18PVQM6

SX18PVPA7

UX18PVNA6

HX18PVQU6

SX18PVQU6

UX18PVNU6

 

HX18PVQM7

SX18PVQM6

UX18PVNA7

HX18PVXU6

SX18PVXU6

UX18PVPU6

 

HX18PVXM6

SX18PVQM7

UX18PVPA6

 

 

UX18PVQU6

 

HX18PVXM7

SX18PVXM6

UX18PVPA7

 

 

UX18PVXU6

 

 

SX18PVXM7

UX18PVQA6

 

 

 

18

 

 

UX18PVQA7

 

 

 

 

 

UX18PVQM6

 

 

 

 

 

 

 

 

 

 

 

 

UX18PVQM7

 

 

 

 

 

 

UX18PVXA6

 

 

 

 

 

 

UX18PVXA7

 

 

 

 

 

 

UX18PVXM6

 

 

 

 

 

 

UX18PVXM7

 

 

 

 

 

 

 

 

 

 

 

HX25PVQM6

SX25PVQM6

UX25PVNA6

HX25PVQU6

SX25PVQU6

UX25PVNU6

 

HX25PVQM7

SX25PVQM7

UX25PVNA7

HX25PVXU6

SX25PVXU6

UX25PVPU6

 

HX25PVXM6

SX25PVXM6

UX25PVPA6

 

 

UX25PVQU6

 

HX25PVXM7

SX25PVXM7

UX25PVPA7

 

 

UX25PVXU6

 

 

 

UX25PVQA6

 

 

 

25

 

 

UX25PVQA7

 

 

 

 

 

UX25PVQM6

 

 

 

 

 

 

 

 

 

 

 

 

UX25PVQM7

 

 

 

 

 

 

UX25PVXA6

 

 

 

 

 

 

UX25PVXA7

 

 

 

 

 

 

UX25PVXM6

 

 

 

 

 

 

UX25PVXM7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

UX33PVNA7

 

 

 

 

 

 

UX33PVPA7

33

 

 

 

 

 

UX33PVQA7

 

 

 

 

 

UX33PVQM7

 

 

 

 

 

 

 

 

 

 

 

 

UX33PVXA7

 

 

 

 

 

 

UX33PVXM7

 

 

 

 

 

 

 

 

HX35PVQM6

SX35PVQM6

UX35PVNA6

HX35PVQU6

SX35PVQU6

UX35PVNU6

 

HX35PVQM7

SX35PVQM7

UX35PVNA7

HX35PVXU6

SX35PVXU6

UX35PVPU6

 

HX35PVXM6

SX35PVXM6

UX35PVPA6

 

 

UX35PVQU6

 

HX35PVXM7

SX35PVXM7

UX35PVPA7

 

 

UX35PVXU6

 

 

SX35PVNM7

UX35PVQA6

 

 

 

35

 

 

UX35PVQA7

 

 

 

 

 

UX35PVQM6

 

 

 

 

 

 

 

 

 

 

 

 

UX35PVQM7

 

 

 

 

 

 

UX35PVXA6

 

 

 

 

 

 

UX35PVXA7

 

 

 

 

 

 

UX35PVXM6

 

 

 

 

 

 

UX35PVXM7

 

 

 

 

 

 

 

 

 

 

 

 

 

continued

 

 

 

6

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

9001000

40

55

75

100

135

165

200

Introduction

continued

UX40PVNA7

UX40PVPA7

UX40PVQA7

UX40PVQM7

UX40PVXA7

UX40PVXM7 HX55PVNU6 SX55PVNU6 UX55PVNU6 HX55PVNU7 SX55PVNU7 UX55PVNU7 HX55PVQU6 SX55PVPU6 UX55PVPU6 HX55PVQU7 SX55PVPU7 UX55PVPU7 HX55PVXU6 SX55PVQU6 UX55PVQU6 HX55PVXU7 SX55PVQU7 UX55PVQU7

SX55PVXU6 UX55PVXU6

SX55PVXU7 UX55PVXU7 HX75PVNU6 SX75PVNU6 UX75PVNU6 HX75PVNU7 SX75PVNU7 UX75PVNU7 HX75PVPU7 SX75PVPU7 UX75PVPU6 HX75PVQU6 SX75PVQU6 UX75PVPU7 HX75PVQU7 SX75PVQU7 UX75PVQU6

UX75PVQU7 HX100PVNU6 SX100PVNU6 UX100PVNU6 HX100PVNU7 SX100PVNU7 UX100PVNU7 HX100PVPU7 SX100PVPU7 UX100PVPU6 HX100PVQU6 SX100PVQU6 UX100PVPU7 HX100PVQU7 SX100PVQU7 UX100PVQU6

UX100PVQU7 HX135PVNU6 SX135PVNU6 UX135PVNU6 HX135PVNU7 SX135PVNU7 UX135PVNU7 HX135PVPU7 SX135PVPU7 UX135PVPU6 HX135PVQU6 SX135PVQU6 UX135PVPU7 HX135PVQU7 SX135PVQU7 UX135PVQU6

UX135PVQU7 HX165PVNU6 SX165PVNU6 UX165PVNU6 HX165PVNU7 SX165PVNU7 UX165PVNU7 HX165PVPU7 SX165PVPU7 UX165PVPU6 HX165PVQU6 SX165PVQU6 UX165PVPU7 HX165PVQU7 SX165PVQU7 UX165PVQU6

UX165PVQU7 HX200PVNU7 SX200PVNU7 UX200PVNU7 HX200PVPU7 SX200PVPU7 UX200PVPU7 HX200PVQU7 SX200PVQU7 UX200PVQU7

9001000

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

7

Introduction

Nameplate Location

The nameplate is located at the rear of the machine. Always provide the machine’s serial number and model number when ordering parts or when seeking technical assistance.

 

1

1

1

 

CFD19CCFD19C

CFD15C

CFD20C

 

 

 

CFD20C

18, 25 AND 35 MODELS

33, 40, 55 AND 75 MODELS

100, 135, 165 AND 200 MODELS

1

Nameplate

 

 

Figure 1

Replacement Parts

If literature or replacement parts are required, contact the source from which the machine was purchased or contact Alliance Laundry Systems at (920) 748-3950for the name and address of the nearest authorized parts distributor.

Customer Service

For technical assistance, call (920) 748-3121.

8

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

9001000