Alcatel-Lucent 6400 User Manual

Size:
576.44 Kb
Download

Alcatel-LucentOmniSwitch 6400

STACKABLE

GIGA BIT LAN SW I TCH FA MIL Y

The Alcatel-Lucent® OmniSwitch6400 Stackable LAN Switch is a layer 2+ Gigabit Ethernet LAN switch addressing the small andmedium-sizedbusiness needs for converged voice, data and video networks as well as residential and business Ethernet access service providers’ requirements. With an optimized design for flexibility and scalability as well as low power consumption, the OmniSwitch 6400 runs thefield-provenAlcatel-LucentOperati ng Software (AOS), providing an outstandi ng edge solution for highly available,self-protective,easily managed andeco-friendlynetworks.

The OmniSwitch 6400 addresses the fixed managed LAN switch segment and expands the current enterprise portfolio, fitting between the Alcatel-LucentOmniStack6200 Stackable LAN Switch (layer 2 Fast Ethernet LAN switch) and theAlcatel-LucentOmniSwitch 6850 Stackable LAN Switch (Advanced layer 3 Gigabit LAN switch with 10G interfaces) in terms of speed and software features.

Solutions that will benefit from these versatile LAN switches are:

Small-to-mediumbusiness (SMB) converged networks

Branch office workgroups

Metro Ethernet access for residential/metro triple-playapplications

Key features

Availability and performance:

• Wire rate switching and routing performance

• High availability with redundant stacking links, primary/secondary unit failover, hot swappable power options and configuration rollback

Key benefits

Always-onrobust infrastructure, optimal response time for users and applications, investment protection

Key features

 

Key benefits

 

 

 

Security and quality of service:

Auto-sensingnetwork access control through Access Guardian framework (802.1X, MAC, rules)

Adva nced quality of serv ice (QoS) and access con trol lists (ACLs) for traffic control

Automated containment and quarantine with Alcatel-LucentQuarantine Manager

Unmatched flexibility and simplified manageability:

Choice of 24 ports, 48 ports power over Ethernet (PoE) or non-PoE,and fiber models.

Scalable from 24 to 384 ports via high speed stacking

AOS management through web interface (Webview)

Supported by Alcatel-Lucent2500/2700 Network Management System (NMS) and 5620 Service Aware Manager (SAM)* applications.

* Contac t for availability

Edge network security and control allowing business continuity and preventing network outages

Scalable and versatile configuration with effortless deployment meeting SMB, branch office or service providers preferences

The Alcatel-LucentOmniSwitch 6400 Stackable LAN switch family offers a variety of PoE,non-PoEGigabit and fiber models.

All models in the Alcatel-LucentOmniSwitch 6400 family are stackable, fixed configuration chassis in a 1U form factor. They can be optionally equipped withAlcatel-Lucentapproved pluggable SFP transceivers supporting short, long and very long distances.

Table 1 indicates the OmniSwitch 6400 models available.

Chassis

10/100/1000

1 Gig combo

10 Gig

Power supplies

Backup power

 

Or Gig

ports

stacking ports

supported

supplies supported

 

 

 

 

 

 

Non-PoEModels

 

 

 

 

 

OS6400-24

20 10/100/1000

4

2

Internal AC supply

External AC or DC

 

 

 

 

 

 

OS6400-48

44 10/100/1000

4

2

Internal AC supply

External AC or DC

 

 

 

 

 

 

OS6400-U24

22 Gig SFP **

2

2

Internal AC supply

External AC or DC

 

 

 

 

 

 

OS6400-U24D

22 Gig SFP **

2

2

Internal DC supply

External AC or DC

 

 

 

 

 

 

PoE Models

 

 

 

 

 

 

 

 

 

 

 

OS6400-P24

20 10/100/1000

4

2

360W AC or 510WAC

360W AC or 510W AC

 

 

 

 

 

 

OS6400-P48

44 10/100/1000

4

2

360W AC or 510WAC

360W AC or 510W AC

 

 

 

 

 

 

* Combo ports are port s indiv idually configurable to be 10/10 0/1000Base -Tor1000Base-Xthat can supp ort SFP transceivers for short, long and very long distances. ** Gigabit fiber inte rfac es suppor t Gigabit SFP or 100BaseX SFP optical transce iver s.

OS6400-24

Compliancy

Alcatel-Lucenthas been a leader in terms of compliance with various “green” initiatives including:

RoHS – The Alcatel-Lucent OmniSwitch family was among the first to be in compliance with the European Community’s directive – Restriction on Hazardous Substances in Electrical and Electronic Equipment

WEEE – Waste Electrical and Electronic Equipment

2 Alcat el-LucentOmniS witch 6400 | Data Sheet

Product specifications

Features

Performance

Interfaces and speeds

24 and 48 ports 10/100/1000, 24 ports 100/1000BaseX

Wire rate at layer 2 and layer 3 on all ports

Two built-in10 Gbpsfull-duplexstacking ports

OS6400-24,-P24,-48,-P48support four Gigabit Ethernet (GigE) SFP combo ports

OS6400-U24,-U24Dsupport two GigE SFP combo ports

PoE: IEEE 802.3af supported on “P” PoE models (15.4 W per port)

Raw switching capacity: ¬ 24 port:

48 Gbps full duplex or 96 Gbps aggregate

¬ 48 port:

96 Gbps full duplex or 192 Gbps aggregate

Switching throughput:

¬24 port: 35.7 Mpps

¬48 port: 71.4 Mpps

Stacking capacity:

¬2x10 Gig full duplex

¬29.8 Mpps

QoS

Priority queues: eight hardwarebased queues per port

Traffic prioritization: Flow-basedQoS with internal and external (a.k.a.,re-marking)prioritization

Bandwidth management: flowbased bandwidth management, ingress policing shaping and port-basedegress shaping

Queue management:Random Early Detect/Discard (RED), configurable de-queuingalgorithm; Strict Priority, Weighted and Deficit Round Robin

1000 ACL policy rules

Layer 2 to layer 4 classifications

High availability

System

Two built-instacking ports to providefault-tolerantlooped stacking configurations

Redundant 1:1 power provided by the OS6400-BPS

Dual image and dual configuration file storage provides backup

Layer 2 switching

Up to 16,000 MACs

Up to 4000 VLANs

Ring Rapid Spanning Tree Protocol (RRSTP) optimized for ring topology to provide less than 100 ms convergence time

* Contac t for availability

802.1s Multiple Spanning Tree Protocol for loop free topology and link redundancy

802.1w Rapid Reconfiguration of Spanning Tree allows sub second failover to redundant link

Alcatel-Lucentper-VLANspanning tree (1x1)

802.1D Spanning Tree Protocol for loop free topology and link redundancy

Static and 802.3ad dynamic link aggregationthat supportsautomatic configuration of link aggregates with other switches

Layer 3 switching

Static routing IPv4 and IPv6

RIP v1 & v2 for IPv4, RIPng for IPv6

Up to 1000 IPv4/ 512 IPv6 static and RIP routes:

Up to 128 IPv4 and 16 IPv6 interfaces

Multicast

Internet Group Management Protocol (IGMP) v1/v2/v3 snooping to optimize multicast traffic

Up to 1000 multicast groups

Network protocols

TCP/IP stack

Address Resolution Protocol (ARP)

Dynamic Host Configuration Protocol (DHCP) relay

DHCP relay to forward client requests to a DHCP server

Generic User Datagram Protocol (UDP) relay per VLAN

Simplified manageability

User interface

Intuitive Alcatel-LucentCLI with familiar interface, reducing training costs

Extensive user manuals with examples

Easy to use, point-and-clickweb-basedelement manager (WebView) withbuilt-inhelp for easy configuration of new technology features

Remote Telnet management or

Secure Shell access using SSH

File upload using TrivialFileTransfer Protocol (TFTP) and FTP

Human-readableASCII-basedconfig files foroff-lineediting and bulk configuration

BootP/DHCP client allows auto configuration of switch IP information to simplify deployment

Auto-negotiating10/100/1000 ports automatically configure port speed and duplex setting

Auto medium-dependentinterface (MDI/MDIX)automaticallyconfigures transmit and receive signals to supportstraight-throughand crossover cabling

Simple Network Management Protocol (SNMP) v1/v2/v3

Integration with SNMP manager Alcatel-LucentOmniVista fornetwork-widemanagement

Network monitoring and troubleshooting

SupportsRFC 2819 Remote Network Monitoring(RMON)group(1-Statistics,2-History,3-Alarm&9-Events)

Port-basedmirroring for troubleshooting and lawful interception supports four sessions with multiple sources-to-onedestination configuration

Policy-basedmirroring - allows selection of the type of traffic to mirror by using QoS policies

Remote port mirroring

Port monitoring feature that allows capture of Ethernet packets to a file, or for on-screendisplay to assist in troubleshooting

Local (on the flash) and remote logging (Syslog)

UnidirectionalLink Detection(UDLD) for detecting one-wayconnections

Network configuration

802.1AB – Link Layer Discovery Protocol with MED extensions

Alcatel-LucentMapping Adjacency Protocol (AMAP) for building topology maps within OmniVista product family

GARP VLAN Registration Protocol (GVRP) for 802.1Q-compliantVLANpruningand dynamicVLAN creation

Fast-forwardingmodeon user ports to bypass30-seconddelay for spanning tree

Auto QoS for switch management traffic as well as traffic from Alcatel-LucentIP phones

Network Time Protocol (NTP) for network-widetime synchronization

Advanced security

Access control

802.1X multi-client,multi-VLANsupportforper-clientauthenticationand VLAN assignment

802.1X with group mobility

802.1X with MAC-basedauthentication, group mobility or “guest” VLAN support

MAC-basedauthentication fornon-802.1Xhost

AuthenticatedVLAN that challenges users with username and password and supports dynamic VLAN access based on user

Captive Portal – a new Access Guardianpolicy that uses embedded web portal for user authentication.*

Public Key Infrastructure (PKI) authentication for SSH access

Support for host integrity check* and remediation VLAN

Learned Port Security (LPS) or MAC address lockdown allows only known devices to have network access preventing unauthorized network device access

Support of Microsoft ® Network Access Protection (NAP)*

Containment, monitoring and quarantine

Supportfor Alcatel-LucentOmniVista2770 Quarantine Manager and quarantine VLAN

ACLs to filter out unwanted traffic including denial of service attacks; flow-basedfiltering in hardware (Layer 1 to Layer 4)

DHCP snooping, DHCP IP spoof protection

Dynamic ARP protection and ARP poisoning detection

Bridge Protocol Data Unit (BPDU) blocking – automatically shuts down switch ports being used as user ports if a spanning tree BPDU packetis seen.Prevents unauthorizedspanning-tree-enabled attached bridges from operating

sFlow v5 support to monitor and effectively control and manage the network usage

Secure management

RADIUS and Lightweight Directory Access Protocol (LDAP) admin authenticationprevents unauthorizedswitch management

TACACS+ client allows for authentication, authorization and accounting with a remote TACACS+ server

Secure Shell (SSH), Secure Socket Layer (SSL) for HTTPS access and SNMPv3 for encrypted remote management communication

Secure file upload using Secure File Transfer Protocol (SFTP), or Secure Copy (SCP)

Switch protocol security

¬MD5 for Routing Information Protocol (RIP) v2 and SNMPv3

¬SSH for secure CLI session with PKI support

¬SSL for secure HTTP session

Ethernet access services

DHCP Option 82 – configurable relay agent information

Q-in-Q(VLAN stacking)

Ethernet OAM compliant with 802.1ag

Alcatel-LucentOmniSwitch 6400 | Data Sheet

3

Alcatel-Lucent5620 SAM support (5620 SAM release 6.1)

Private VLAN feature

IP Multicast VLAN (IPMVLAN)

Ethernet services:

¬Service VLAN (SVLAN) and Customer VLAN (CVLAN)

transparent LAN services

¬Ethernet network-to-networkinterface (NNI) and user network interface (UNI) services

¬Service Access Point (SAP) profile identification

MEF 9 and 14 certified

UDLD protection

Up to 16,000 MAC address learning

Up to 2000 QOS policy rules

Up to 1000 ACL policy rules

Up to 4096 VLANs per switch

Power supplies and power consumption

Supports redundant hot-swappablepower supplies

AC supplies: 90 V to 220 V AC

DC supplies: 36 V to 72 V DC

Non-PoEmodels

Uses internal main power supplies and externalbackup power supplies directly connected to the rear of the unit or remotely mounted

Backup power suppliesuse a power shelf to hold one 6400-BP(AC) or one6400-BP-D(DC) supply

PoE models

360-W(AC) and510-W(AC) power supplies only used with PoE models

Power shelf holds one 510-WAC, or two360-WAC power supplies

Dynamic power for PoE with 360-Wpower supply: 240 W

Dynamic power for PoE with 510-Wpower supply: 390 W

Specifications

Indicators

Per-portLEDs

10/100/1000: PoE, link/activity

SFP: link/activity

Stacking: link/activity

System LEDs

Switch ID (indicates the stack ID of the unit in the stack: 1 to 8)

System (OK) (chassisHW/SW status)

PWR (primary power supply status)

PRI (virtual chassis primary)

BPS (backup power status)

Physical dimensions (WxDxH)

Chassis size (without mounting brackets)

* Contac t for availability .

24-portnon-PoEand fiber with internal power supply

Height: 1.73 in. (4.4 cm)

Width: 17.32 in. (44.0 cm)

Depth: 10.63 in. (27.0 cm)

48-portnon-PoEwith internal power supply

Height: 1.73 in. (4.4 cm)

Width: 17.32 in. (44.0 cm)

Depth: 13.0 in.(33.0 cm)

24-portPoE without power shelf

Height: 1.73 in. (4.4 cm)

Width: 17.32 in. (44.0 cm)

Depth: 10.63 in. (27.0 cm)

48-portPoE without power shelf

Height: 1.73 in. (4.4 cm)

Width: 17.32 in.(44.0 cm)

Depth: 10.63 in. (27.0 cm)

Total sizes including power supply shelf for PoE and backup supply

17.32 x 17.56 x 1.73 in (44.0 x

44.6x 4.4 cm) for 10.63 inch chassis

17.32 x 19.93 x 1.73 in (44.0 x

50.6x 4.4 cm) for 13.00 inch chassis

Note: All chassis are 19” (48.2 cm) wide with mounting brackets installed

Weight

Chassis

Non-PoEwith internal supply

OS6400-249.43 lbs (4.28 kg)

OS6400-4811.97 lbs (5.43 kg)

OS6400-U249.76 lbs (4.43 kg)

OS6400-U24D9.23 lbs (4.189 kg)

PoE without internal power supply

OS6400-P248.97 lb (4.07 kg)

OS6400-P489.92 lb (4.50 kg)

Power supplies

OS6400-BP126W AC: 2.45 lb (1.11 kg)

OS6400-BP-D120W DC: 2.09 lb (0.95 kg)

OS6400-BP-P360W AC: 3.22 lb (1.46 kg)

OS6400-BP-PH510W AC: 5.71 lb (2.59 kg)

Power shelf: 1.26 lb (0.57 kg)

EMC

FCC CRF Title 47 Subpart B (Class A limits. Note: Class A with UTP cables)

VCCI (Class A limits. Note: Class A with UTP cables)

AS/NZS 3548 (Class A limits. Note: Class A with UTP cables)

CE marking for European countries (Class A Note: Class A with UTP cables)

EN 55022:1995 (EmissionStandard)

EN 61000-3-3:1995

EN 61000-3-2:2000

EN 55024:1998(ImmunityStandards)

EN 61000-4-2:1995+A1: 1998

EN 61000-4-3:1996+A1: 1998

EN 61000-4-4:1995

EN 61000-4-5:1995

EN 61000-4-6:1996

EN 61000-4-8:1994

EN 61000-4-11:1994

IEEE 802.3: Hi-PotTest (2250 VDC on all Ethernet ports)

Safety agency certifications

US UL 60950

IEC 60950-1:2001;all national deviations

EN 60950-1:2001; all deviations

CAN/CSA-C22.2No.60950-1-03

NOM-019SCFI, Mexico

AS/NZ TS-001and 60950:2000, Australia

UL-AR,Argentina

UL-GSMark, Germany

EN 60825-1Laser,EN60825-2Laser

CDRH Laser

China CCC

Environmental requirements

Operating temperature:

• 32° to 113°F (0° to 45°C)

Storage temperature:

-40°to 167°F(-40°to 75°C)

Humidity (operating and storage):

• 5% to 95% non-condensing

IEEE standards

IEEE 802.1D (STP)

IEEE 802.1p (CoS)

IEEE 802.1Q (VLANs)

IEEE 802.1adQ-in-Q(VLANstacking)

IEEE 802.1ag (Connectivity Fault Management)

IEEE 802.1s (MSTP)

IEEE 802.1w (RSTP)

IEEE 802.1X (Port Based Network Access Protocol)

IEEE 802.3i (10BaseT)

IEEE 802.3u (Fast Ethernet)

IEEE 802.3x (Flow Control)

IEEE 802.3z (Gigabit Ethernet)

IEEE 802.3ab (1000BaseT)

IEEE 802.3ac (VLAN Tagging)

IEEE 802.3ad (Link Aggregation)

IEEE 802.3af (Power-over-Ethernet)

IETF standards

IPV4

RFC 2003 IP/IP tunneling

RFC 2784 GRE tunneling

RIP

RFC 1058 RIP v1

RFC 1722/1723/2453/1724 RIP v2 & MIB

RFC 1812/2644 IPv4 Router Requirement

RFC 2080 RIPng

IP Multicast

RFC 1112 IGMP v1

RFC 2236/2933 IGMP v2 & MIB

RFC 2365 Multicast

RFC 3376 IGMPv3

IPV6

RFC 1886 DNS for IPv6

RFC 2292/2373/2374/2460/2462IPv6

RFC 2461 NDP

RFC 2463/2466 ICMP v6 & MIB

RFC 2452/2454 IPv6 TCP/UDP MIB

RFC 2464/2553/2893/3493/3513IPv6

RFC 3056 IPv6 Tunneling

RFC 3542/3587 IPv6

Manageability

RFC 854/855 Telnet & Telnet options

RFC 1155/2578-2580SMI v1 & SMI v2

RFC 1157/2271 SNMP

RFC 1212/2737 MIB & MIB-II

RFC 1213/2011-2013SNMP v2 MIB

RFC 1215 Conventionfor SNMPTraps

RFC 1573/2233/2863 Private Interface MIB

RFC 1643/2665 Ethernet MIB

RFC 1901-1908/3416-3418SNMPv2c

RFC 2096 IP MIB

RFC 2570-2576/3411-3415SNMPv3

RFC 2616 /2854 HTTP & HTML

RFC 2667 IP Tunneling MIB

RFC 2668/3636IEEE 802.3MAUMIB

RFC 2674 VLAN MIB

RFC 4251 Secure Shell Protocol architecture

RFC 4252 The Secure Shell (SSH) Authentication Protocol

Security

RFC 959/2640 FTP

RFC 1321 MD5

RFC 2104 HMAC Message Authentication

RFC 2138/2865/2868/3575/2618 RADIUSAuthentication& Client MIB

RFC 2139/2866/2867/2620 RADIUS Accounting & Client MIB

RFC 2228 step

RFC 2284 PPP EAP

RFC 2869/2869bisRADIUS Extension

4 Alcat el-LucentOmniS witch 6400 | Data Sheet

Quality of Service

• RFC 792

ICMP

• RFC 951 Bootp

• RFC 1541/1542/2131/3396/3442

• RFC 896 Congestion control

• RFC 768

UDP

• RFC 1151 RDP

DHCP

 

• RFC 1122 Internet hosts

• RFC 793/1156 TCP/IP & MIB

• RFC 1191

Path MTU Discovery

• RFC 1757/2819 RMON & MIB

• RFC 2474/2475/2597/3168/3246

• RFC 826/903 ARP & Reverse ARP

• RFC 1256

ICMP Router Discovery

• RFC 2131/3046 DHCP/BootP Relay

DiffServ

• RFC 919/922 Broadcasting

• RFC 1305/2030NTP v3 & Simple

• RFC 2132 DHCP Options

• RFC 3635 Pause control

 

 

internet datagram

NTP

 

• RFC 2251 LDAP v3

Others

• RFC 925/1027 Multi LAN ARP /

• RFC 1493

Bridge MIB

• RFC 3060

Policy Core

• RFC 791/894/1024/1349 IP & IP /

Proxy ARP

• RFC 1518/1519 CIDR

• RFC 3176

sFlow

Ethernet

• RFC 950

Subnetting

 

 

• RFC 3021

Using 31-bitprefixes

 

 

 

 

 

Product

MTBF (hours)

Power

Heat dissipation under

Acoustic level

 

 

 

 

consumption*

full load (btu/hour)

(dB(A))**

 

 

 

 

 

 

Non-PoEModels

 

 

 

 

 

 

 

 

 

 

 

OS6400-24

187,933

 

52

180

under 40dB(A)

 

 

 

 

 

 

OS6400-48

162,844

 

79

269

under 40dB(A)

 

 

 

 

 

 

OS6400-U24

189,983

 

80

272

under 40dB(A)

 

 

 

 

 

 

OS6400-U24D

424,657

 

80

272

under 40dB(A)

 

 

 

 

 

 

PoE Models***

 

 

 

 

 

 

 

 

 

 

 

OS6400-P24

149,166

 

69

235

under 44dB(A)

 

 

 

 

 

 

OS6400-P48

158,837

 

103

351

under 44dB(A)

 

 

 

 

 

 

 

*

Power consumpt ion measur ed under fully loaded traffic conditions

 

 

 

**

Acoustic Levels measur ed with a single power supply at room temperature

 

 

 

*** Power consumpt ion of the OS6400 PoE models tested unde r fully loade d traf fic condi tions using a 360W PoE suppl y.

Alcatel-LucentOmniSwitch 6400 | Data Sheet

5

ORD

ER

I NG

INFORMA

TION

 

 

 

 

 

 

 

 

 

PART NUMBER

 

 

DESCRIP TION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Omni Switch 6400 Chassi s

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OS6400-24

 

 

Gi ga bit

Ethe rne t cha ss is in a 1U form factor

wit h 20 RJ-45por ts individually

confi gurable

to 10/1 00/100 0B aseT, four

comb o

 

 

 

por ts configurable to be 10/100/1000Ba seT or 1000BaseX, and two dedicate d 10G stack ing port s. Combo port s supp ort either

copp er

 

 

 

or fibe r can be used on a one for one basis. Ethernet optical transceivers (SF P*), stacki ng cable, and backup powe r supplies

can be

 

 

 

ordered separa tely. Internal AC supply with power cord and RJ45 to DB-9

ada pter

inc lude d.

 

 

 

 

 

 

 

 

 

 

 

 

 

OS6400-48

 

 

Gi ga bit

Ethe rne t cha ss is in a 1U form factor

wit h 44 RJ-45por ts individually

confi gurable

to 10/1 00/100 0B aseT, four

comb o

 

 

 

ports configur able to be 10/100/10 00BaseT or 1000BaseX, and two dedicated 10G stacking ports. Combo ports support either copper or

 

 

 

fiber can be used on a one for one basis. Ethern et optical transceiv ers (SFP*), stacki ng cable, and backup power supplies can be order ed

 

 

 

separately. Inte rnal AC supply with power cord

and RJ-45toDB-9adapter inclu ded.

 

 

 

 

 

 

 

 

OS6400-U24

 

Gigabit Ethernet chassis in a 1U form factor with 22 100/100 0Bas eX SFP ports, two combo ports conf igurabl e to be 10/1 00/1000 BaseT

OS6400-U24D

 

or 100/1000 BaseX, and two dedicated 10G stacking ports. Combo ports suppo rt either copper or fiber can be used on a one for one basis.

 

 

 

Ethernet optical transceiv ers (SFP *), stac king

cable, and

backup power supplies

can be ordered

separate ly. RJ -45to DB-9adapter

 

 

 

included . Inte rnal AC or DC supp ly respectively

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Omni Switch 6400 PoE Chas sis

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OS6400-P24

 

Gigabit

Etherne t chassis in a 1U form factor with 20 RJ-45

POE ports individually configurable to 10/100/1000Ba seT, four combo ports

OS6400-P24H

 

conf igurab le to be 10/100/1000BaseT or 1000BaseX, and two dedic ated 10G stackin g ports. Combo ports suppo rt eith er copper or fibe r

 

 

 

can be used on a one for one basis. Ethe rnet optic al trans ceiv ers (SFP *), stac king

cab le, and back up power

sup plie s can be orde red

 

 

 

separately. The bundle

includes an AC PoE power supply with power shelf, country specific power cord, user manuals access card, rack

 

 

 

mounts

and RJ-45toDB-9adaptor. A 360W AC or 510W AC power supply respectiv ely is included in the bundle.

 

 

 

 

 

 

 

OS6400-P48

 

Gigabit

Etherne t chassis in a 1U form factor with 44 RJ-45

POE ports individually configurable to 10/100/1000Ba seT, four combo ports

OS6400-P48H

 

conf igurab le to be 10/100/1000BaseT or 1000BaseX, and two dedic ated 10G stackin g ports. Combo ports suppo rt eith er copper or fibe r

 

 

 

can be used on a one for one basis. Ethe rnet optic al trans ceiv ers (SFP *), stac king

cab le, and back up power

sup plie s can be orde red

 

 

 

separately. The bundle

includes a 510W AC PoE power supply with power shelf, country specific power cord,

user manuals access card,

 

 

 

rack mounts and RJ-45 toDB-9adaptor. A 360W AC or 510W AC power supply respecti vely is included in the bundl e

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Powe r Supplie s

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OS6400-BP-P

 

OS6400- BP-Pmodula r 360W AC backup power supply. Provides backup power to one PoE switch. Ships with chassis connection cable and

 

 

 

count ry-specifi c power

cord .

 

 

 

 

 

 

 

 

 

 

 

 

OS6400-BP-PH

 

OS6400-BP-PHmodular 510W AC backup power supply. Prov ides back up powe r to one PoE switch. Ships with chassi s connection cable,

 

 

 

count ry-specifi c power

cord , power shelf and rack mounts.

 

 

 

 

 

 

 

 

 

 

 

 

OS6400-BP

 

 

OS6400-BPmodular 126W AC backup power supply. Prov ides backup power to onenon-PoEswit ch. Ships with chassis connectio n cable

 

 

 

and country-speci fic power cord.

 

 

 

 

 

 

 

 

 

 

 

 

OS6400-BP-D

 

OS6400- BP-Dmodul ar 120W DC backup power supply. Provid es backup power to onenon-PoEswitch. Ships with chassis connection cable.

 

 

 

 

 

 

 

 

 

 

 

 

Giga bit Ethe rnet Transce ivers

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SFP-GIG-EXTND

 

Extende d 1000BaseSX Gigabit Ethernet optical transceiver

(SFP MSA). Supports multi mode fiber over 850nm wavelen gth (nominal) with

 

 

 

an LC conne ctor. Rea ch of up to 2 km (based on grade and condition of fiber) on 62.5/125 _m MMF or 550m on 62.5/1 25 _m MMF.

 

 

 

Requires SFP-GIG-EXTND orGBIC-GIG-EXTNDat the remote termination.

 

 

 

 

 

 

 

 

 

 

SFP-GIG-LH40

 

1000Base LH Gigabit Etherne t optica l tran sceiver (SFP MSA). Supports single mode fiber over 1310 nm wavele ngth (nominal) with an LC

 

 

 

conne ctor. Typical reach of 40 Km on 9/125 _m SMF.

 

 

 

 

 

 

 

 

 

 

 

 

SFP-GIG-LH70

 

1000Base LH Gigabit Etherne t optica l tran sceiver (SFP MSA). Suppo rts single

mode fiber over 1550 nm wavelength (nominal) with an LC

 

 

 

conne ctor. Typical reach of 70 Km on 9/125 _m SMF.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SFP-GIG-LX

 

 

1000Base-LX Gig ab it

Ethe rnet op tica l tra ns ce ive r (S FP

MS A). Su ppor ts si ngl e mode fiber ov er 13 10 -nmwav el en gth (n omina l)

 

 

 

with an LC connec tor. Typic al reach of 10 km on 9/125 _m SMF.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SFP-GIG-SX

 

 

100 0B as e- SX Gi gabit Et her net opt ical tr ansce iver (SFP MSA). Supports

multimode

fiber over

850-nmwaveleng

th (nominal)

with

 

 

 

an LC connec tor. Typical reach of 300 m on 62.5/125 _m MMF or 550 m on 50/125 _m MMF.

 

 

 

 

 

 

 

 

 

SFP-GIG-T

 

 

1000Base T Gigabit Ethernet Transceiver (SFP MSA) - Supports category 5, 5E, and 6 copper cabling

up to 100m . SFP only works in 1000

 

 

 

Mbps speed and full -duplex mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SFP-GIG-BX-D

 

1000Base BX SFP transceiver with an LC type of interface. This bidirectional

transceiver

is designed

for use over single

mode fiber

optic

 

 

 

on a single strand link up to 10 km. Transmits 1490 nm and receives 1310 nm optical

signal.

 

 

 

 

 

 

 

 

 

 

 

 

SFP-GIG-BX-U

 

1000Base BX SFP transceiver with an LC type of interface. This bidirectional

transceiver

is designed

for use over single

mode fiber

optic

 

 

 

on a single strand link up to 10 km. Transmits 1310 nm and receives 1490 nm optical

signal.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

* Alcatel -Lucent approv ed SFPs

6 Alcat el-LucentOmniS witch 6400 | Data Sheet

OR DER

IN

G

IN

FORMA

TION

 

 

 

PART NUMBER

 

DESCRIPT ION

 

 

 

 

 

 

 

 

 

 

 

100FX Transce ivers

(for all OS6400 SFP Ports)

 

 

 

 

 

 

 

 

 

SFP-100-LC-MM

 

100Bas eFX SFP transce iver with an LC type interface. This transceive r is designed

for use over multimo de fiber optic cable.

 

 

 

 

 

SFP-100-LC-SM15

100Bas eFX SFP transce iver with an LC type interface. This transceive r is designed

for use over single

mode fiber opti c cable up to 15KM.

 

 

 

 

 

SFP-100-LC-SM40

100Bas eFX SFP transce iver with an LC type interface. This transceive r is designed

for use over single

mode fiber opti c cable up to 40KM.

 

 

 

 

SFP-100-BX20LT

 

100Bas eBX SFP trans ceiv er with an SC type interface. This bidirec tional transceiver is designed for use over single mode fiber optic on a

 

 

single

strand

link up to 20KM point -to-point. This transceiver is normally used in the cent ral office (OLT) transmits 1550n m and receiv es

 

 

1310nm optical signal.

 

 

 

 

 

 

 

 

SFP-100-BX20NU

 

100Bas eBX SFP trans ceiv er with an SC type interface. This bidirec tional transceiver is designed for use over single mode fiber optic on a

 

 

single

strand

link up to 20KM point -to-point. This transceiver is normally used in the clie nt (ONU) transm its 1310nm

 

 

 

 

 

 

 

 

 

Access ories

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OS6400-CBL-30

 

OS640 0 30 centime ters long stacking cable

 

 

 

 

 

 

 

 

 

OS6400-CBL-60

 

OS640 0 60 centime ters long stacking cable

 

 

 

 

 

 

 

 

 

OS6400-CBL-150

 

OS640 0 150 centim eters long stacki ng cable

 

 

 

 

 

 

 

 

 

 

 

 

* Alca tel-Lucent approv ed SFPs

Alcatel-LucentOmniSwitch 6400 | Data Sheet

7

www.alcatel -lucent.com Alcatel, Lucent,Alcatel-Lucentand theAlcatel-Lucentlogo are trademarks ofAlcatel-Lucent.All other trademarks are the property of their respective owners. The information presented is subject to change without notice.Alcatel-Lucentassumes no responsibility for inaccuracies contained herein. © 2008Alcatel-Lucent.All rights reserved. 032107 Rev. D 11/08