Alcatel-Lucent 22 User Manual

Size:
495.83 Kb
Download

TEMPORIS 12 / TEMPORIS 22

Technical Manuals Online! - http://www.tech-man

1. SETUP

lPlug one end of the spiral cord into the handset plug (A), and the other end into the socket located on the left-handside of the phone (B).

B A

lPlug the telephone cord into the socket (C) situated on the back of the set and plug the other end (D) into the telephone wall socket.

E

C

D

NOTE: The spare socket (E) enables a modem to be connected.

l Stick the emergency number label in the appropriate place.

2. WALL MOUNTING

To mount your telephone set on the wall, remove the wall mounting peg and put it back in reverse position as described below. Bore two 6mm-largeholes, spaced 70 mm apart. Put two plugs in place, then, place in two screws (3.5 mm Ø and 25 mm long) without tightening them.

Place the cord in the slot situated underneath the set.

Technical Manuals Online! - http://www.tech-man

Wall mounted position Horizontal position

FUNCTION KEYS

 

Stick the phone number

Peg for wall mounting

label there

 

10 memories

Message waiting lamp

Memories and set

Loudspeaker

programming key

Redial/Pause

Mute key

Additional services access key

Loudspeaker

key *

Loudspeaker and ringer * sound level adjustment

Technical Manuals Online! - http://www.tech-man

* on TEMPORIS 22 only

3. GENERAL USE

3.1 LINE LAMP / MESSAGE WAITING LAMP

This light flashes in rhythm with the ringing when you receive a call. It lights up as soon as you take the line.

If you are connected to a private ALCATEL telephone system equipped with mail, the message waiting lamp informs you of a message in your “mail box”.

Dialling can be done in two different ways:

lBy lifting the handset then dialling.

lBy dialling in on hook mode.

3.2 DIALLING IN ON HOOK MODE*

Press the loudspeaker key then dial your correspondent’s number. Go off hook to establish the conversation.

3.3 LOUDSPEAKER KEY*

During a call, press the Loudspeaker key so that the people around you can hear the conversation.

l Adjust the sound level with theandkeys.

l Deactivate the loudspeaker by pressing the Loudspeaker key again.

3.4 HANDSET SOUND VOLUME*

When the loudspeaker is deactivated, you can increase the handset sound volume. l Press thekey.

l To return to the initial volume, press thekey.

3.5 MUTE

l Press the Mute key. Your correspondent can no longer hear you during this waiting

BEEP

time.

l 1 beep is generated on the line every 10 seconds.

l To resume the conversation, press the Mute key again.

3.6 LAST NUMBER REDIAL

l Go off hook.

l Press the Last Number Redial key.

To erase the last number redial

l Go off hook.

l Press the Programming keytwice.

l Press the Last Number Redial key.

3.7 ADDITIONAL SERVICES KEYS

Function keys allowing access to additional services. (Ask at your local Telecom

company or your fitter for information).

Technical Manuals Online! - http://www.tech-man

* On TEMPORIS 22 only

4. USING THE MEMORIES

NOTE: When programming your TEMPORIS communicates with you usingBEEP. 1 Beep : Whilst programming, each key pressed is validated by 1BEEP.

2 Beeps : Indicate that your programming is correct.

3 Beeps : Something is wrong in your programming; Restart from the beginning.

Your telephone set can store 10 numbers of up to 24 digits.

4.1 PROGRAMMING THE MEMORIES

Programming without calling

lGo off hook.

lPress the Programming key.

lEnter the number.

lPress one of the ten memory keys.

Programming whilst calling

lGo off hook.

lEnter the number.

l Press the Programming key whether you are in conversation or not.l Press one of the ten memory keys.

4.2 DIALLING FROM A MEMORY l Go off hook.

l Press one of the ten memories keys. The loaded number is dialled automatically.

4.3 ERASING A MEMORY l Go off hook.

l Press the Programming keytwice.

l Press the key corresponding to the memory to be erased.

5. CHOOSING AND ADJUSTING THE RINGER

You can choose and adjust one of the four melodies available when your telephone is ringing, or at any time after entering the programming mode.

5.1 WHEN YOUR TELEPHONE IS RINGING

Modification of the ringer can be carried out during a ringing phase.l Press one of the keys1,2,3 or4 to change the melody.

l To reduce or increase ringing volume, press

or

on TEMPORIS 22 or

press

or

on TEMPORIS 12.

 

 

Your modifications are memorized, you can answer the call.

 

5.2 WHEN IN PROGRAMMING MODE

To access the programming mode:

l Press and hold keys1 and3 simultaneously.

lPick up the handset.

lRelease the keys.

BEEP

Technicall Access toManualsprogramming modeOnline!is co firmed- http://wwwby 1 beep. .tech-man

To adjust the ringing:

l Press the Programming key then key1 (current melody is heard).

l To reduce or increase ringing volume, pressoron TEMPORIS 22 or pressoron TEMPORIS 12.

l Pressing a key between1 and4 changes the melody.

To put ringer ON/OFF:

lPress the Programming key then key 0.

lPress to put the ringer OFF. When ringer is OFF, 4 BEEP are heard when

picking up the handset.

l Press

to put the ringer ON.

l Put the handset on hook.

6. LOCKING THE TELEPHONE SET

Thanks to a 4-digitpassword, your can:

l Forbid access to the ringing tone programming.

l Forbid access to the configuration for professional use.l Limit calls to phone numbers of up to 6 digits maximum. The initial password is 0000.

 

6.1 ACCESSING THE PROGRAMMING MODE

 

Your are offered 3 operations. For each of them, access the programming mode

 

again.

 

 

l Press and hold keys4 and6 simultaneously.

 

l Pick up the handset.

 

l Release the keys.

 

6.2 LOCKING / UNLOCKING

 

l Press the Programming key followed by1.

 

Locking

 

 

l Press the

key.

 

l Go on hook.

 

 

Unlocking

 

 

l Press the# key.

 

l Enter the password.

 

l Go on hook.

 

 

6.3 MODIFYING THE PASSWORD

 

Access the programming mode again and then:

 

l Press the Programming key followed by2.

 

l Enter the current password.2 beeps are generated.

 

l Enter the new4-digitpassword.2 beeps are generated.

BEEP

l Enter it a second time.2 beeps are generated.

BEEP

l Put the handset on hook.

Technical Manuals Online! - http://www.tech-man

BEEP

BEEP

6.4 IF YOU FORGOT THE PASSWORD

Access the programming mode again and then:

lPress the Programming key followed by 0.

lPress the * key.

l2 beeps are generated.

lGo on hook.

FThis last operation erases the WHOLE programming including memories.

The password is 0000 again.

7.CONFIGURATION FOR PROFESSIONAL USE

If your TEMPORIS is connected directly to the public network, do not pay attention to this chapter.

7.1 ACCESSING THE PROGRAMMING MODE

Your are offered 3 operations. For each of them, access the programming mode again.

lPress keys 1 and3 simultaneously.

lGo off hook.

lRelease the keys.

7.2 TYPE OF DIALLING

l Press the programming key followed by 2.

For pulse dialling

l Press thekey (orkey)l Go on hook.

For tone dialling

l Press thekey (orkey).l Go on hook.

7.3 FLASH DURATION (R)

Access the programming mode again and then: l Press the Programming key followed by 3.

l Press : 1 for a 80 ms flash, 2 for a 100 ms flash, 3 for a 180 ms flash, 4 for a 250 ms flash, 5 for a 300 ms flash, 6 for a 600 ms flash.

l Go on hook.

Technical Manuals Online! - http://www.tech-man

8. GUARANTEE

lThis product is guaranteed according to the clauses offered by your distributor.

lTo get this guarantee you must use your telephone according to the instructions of the user guide and you have to keep the invoice or ticket mentioning purchasing date and distributor name.

lThe guarantee doesn’t apply in case of:

-problem due to abnormal use,

-telephone damaged by shocks or fall,

-telephone damaged by overvoltage, lighting, fire or water,

-maintenance by unauthorized person.

9. CUSTOMERS SERVICE

The store from which you bought the set is in a position to give you information and/or provide after-salesservice.

This product is designed to be connected to an analog telephone line classified TNV3.

DECLARATION OF CONFORMITY

According the disposition of the directive 1999/5/EC of the European parliament and of the council of 9 March 1999 on radio equipment and Telecommunications terminal equipment and the mutual recognition of their conformity.

The certificate of conformity is available from the following Internet site: “www.atlinks.com”.

Engineered by

rightthereservesmanufacturerto modify

orderinproductsitsofspecificationsto complyorimprovementstechnicalwith companiesNanterreregulations.registry

059.546390

05/01AAAE131973BQ:

An ALCATEL/THOMSON multimedia

 

 

 

 

Joint Venture Company

 

 

 

 

Sales and Marketing Departments:

 

 

 

 

41 boulevard de la République - Bât. B6 - 78400 Chatou - France

 

 

 

 

Head office: 46, quai Alphonse Le Gallo

 

 

 

 

92100 Boulogne Billancourt - France

 

 

-number:manRef

PrintedTechnicalby : . . . . . . .

Manuals. . . . . . . . . . . . .Online!. . . . . . . . . . . .-. .http://www.tech. . . . . . . .Thethemakenew