Aiwa CDC-XI User Manual

Size:
3.14 Mb
Download

CDC-XIOw

STEREO CAR CD RECEIVER

RADIO-TOCADISCOSDE CD ESTEREOFONICO PARA AUTOMOVIL

OWNER’S RECORD

For your convenience, record the model number and serial number(you will find them on the bottom of your set) in the space provided below. Please refer to them when you contact yourAIWA dealer in case of difficulty.

Model No. \ CDC-XIO

‘eria’ ‘0 ~

~

TABLE OF CONTENTS

 

PRECAUTIONS ..................................................................................................................................

 

 

3

DETACHING

THE CONTROL PANEL ................................................................................................

4

CONTROL

PANEL .............................................................................................................................

 

 

5

TURNING

ON/OFF

THE UNIT

............................................................................................................

6

SOUND ADJUSTMENTS ....................................................................................................................

 

7

RADIO OPERATION

..........................................................................................................................

 

8

PRESE~lNG

STATIONS .................................................................................................................

 

lO

CD PLAYBACK .................................................................................................................................

 

 

12

PROGRAM

 

PLAY .............................................................................................................................

 

 

14

SPECIFICATIONS ............................................................................................................................

 

 

16

TROUBLESHOOTING .....................................................................................................................

 

17

NOTE

 

 

 

 

 

FOR USE IN THE U.S.A.

 

 

This equipment has been tested and found to

 

comply with the limits for a Class B digital device,

 

pursuant to Part 15 of the FCC Rules. These

 

limits are designed to provide reasonable

 

protection against harmful interference in a

 

residential

installation.

 

 

This equipment generates, uses, and can radiate

 

radio frequency energy and, if not installed and

 

used in accordance with the instructions, may

 

cause

harmful

interference

to radio

 

communications. However, there is no guarantee

 

that interference will not occur in a particular

 

installation. If this equipment does cause harmful

 

interference to radio or television reception, which

 

can be determined by turning the equipment off

 

and on, the user is encouraged to try to correct

 

the interference by one or more of the following

 

measures:

 

 

 

 

 

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and recewer.

Connect the equipment into an outlet on circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/ TV technician for help.

CAUTION

Modifications or adjustments to this product, which are not expressly approved by the manufacturer, may void the user’s right orauthorify to operate this product.

~ PRECAUTIONS

Do not attempt to disassemble this unit. Laser rays from the optical pickup are dangerous to the eyes.

Make sure that pms or other foreign objects do not get inside the unit; they may cause malfunctioning, or a safety hazard such as electrical shock or exposure of laser rays.

When your car is parked under direct sunlight in summer, there may be a considerable rise in temperature inside the car. Ensure to let the ambient temperature cool down before operating the unit.

This unit is designed to be operated on a 12 volt DC negative ground electrical system only.

When replacing the fuse, be sure to usethefuse whose amperage rating is identical. Use of a fuse with higher amperage may cause serious damage to the unit.

Notes on CDs

A defective or soiled disc inserted into the unit

M

can cause sound to drop out during playback.

&

Handle the disc by holding its inner and outer

=.

 

edges.

%

Do not touch the surface of the unlabeled side of the disc.

Do not stick paper or tape etc. on the surface.

Do not expose the disc to direct sunlight or excessive heat.

. Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth.

Never use solvents such as benzine or alcohol to clean the disc.

/.

Do not use an adaptor when playing a 3-inch(8 cm) CD. It may cause malfunctiomng.

DETACHING THE CONTROL PANEL

You can detach the control panel from the unit and carry it with you when you leave your car unattended,

1If a disc is inserted, remove it to prevent possible damage to the unit.

2Press POWER to turn the unit off.

3While supporting the control panel with one hand, press @to release one side of the panel. Care must be taken not to drop the panel as it may suddenly eject at this point.

4When the control panel is lifted from the unit, remove it by pulling away from the unit,

E

Note

Put the control panel inside the supplied carrying case to protect it from being damaged when you carry it with you.

Attaching the control panel

CONTROL PANEL

Display window

o & (detach) button

@POWER @ button @Disc compartment @LOAD/EJECT 4 button

@Preset Station buttons 1-6

@INT (intro) button

@RPT (repeat) button

@RDM (random) button

@PRG (program) button

@-11(play/pause) button

@AV (upldown) button @MODE button

@A.M (auto memory) button

@BAND button

@ 4/- TUNE +/w button

@W SEEKW button

@R/CD (radio/CD) button

@LOUD button

@CD-S(CD single) indicator

@DISC indicator

@ST (stereo) indicator

@RNDM (random) indicator

@PROG (program) indicator (@INTRO indicator

@RPT (repeat) indicator

@LUD (loud) indicator

@Main Display section

To turn on the unit

Press POWER or any other button (except ~).

To turn off the unit

Press POWER.

m SOUND ADJUSTMENTS

(—)

 

1 Press MODE to select the mode You want to adjust

‘7

 

from VOL (volume), BAS (bass), TRE (Treble), BAL

 

(balance), and FAD (fader).

 

 

 

I

Themodeindicatorlightsupinthefollowingorder.

u

( J The selected mode changes to the volume mode when MODE is pressed for more than 5 seconds.

2Press A or V (for less than 0,5 seconds) to adjust the sound quality.

To change the level rapidly, press and hold A or 7 down longer.

 

 

A

side

V

side

Ifrft

Increases

the

Decreases

the

v uf_

volume level.

volume level.

 

Increases

the bass

Decreases

the bass

%H5

level.

 

 

level.

 

 

Increases the treble Decreases the treble

~l?~

I level.

 

 

level.

 

WIL

Decreases

the level Decreases the level

of the

left

 

of the right

 

 

 

speaker(s).

 

speaker(s).

 

 

Decreases the level Decreases the level

~~~

of the

front

 

of the rear speakers.

 

speakers.

 

 

 

Note

*Without selecting any mode with MODE, only the volume level can be adjusted by pressingA or T.

LOUD (loudness) function

Press LOUD to reinforce bass and treble especially when listening at low volume level. To cancel the loudness, press LOUD again.

To set the turn-onvolume level

The unit can be set to always turn on at the same volume level.

After adjusting the volume with A or Y, press and hold POWER down for more than 2 seconds until a beep tone is heard.

~ RADIO OPERATION

1 Press any button (except ~) to turn on the unit.

The radio frequency is displayed.

If the unit is in the CD operation, press R/CD to select the radio operation.

Press BAND to select the desired band from FM1,

FM2, FM3, and AM.

The band indicator [FM1, FM2, FM3, or AM] is displayed.

3 Press-TUNE+repeatedly to tune in the desired station.

Press + to increase and - to decrease the frequency.

To change the frequency rapidly, press and hold + or - down longer.

. Adjust the volume with A or 7.

8

m

m

d

=

m

Y’

Note

FM1, FM2, and FM3 have the same frequency range.

*ST indicator lights up when an FM stereo broadcast is received with a sufficient signal strength.

Seek Tuning

The seek function is used to search for the station automatically.

1 Press BAND toselect thedesired band.

2 Press 144 SEEK~ tostart theseek function.

Press W tosearch forthehigher frequencies and M forthe lower frequencies. The seeking stops when the nearest station with good reception is tuned in.

Press WI or 144 repeatedly until thedesired station lsrecewed.

To turn off the radio

Press R/CD or insert a disc.

The radio is turned off and the CD operation starts.

~ PRESETTING STATIONS

Up to 6 stations for each band [FM1, FM2, FM3, and AM] can be stored on the preset station buttons.

1Press BAND to select the desired band from FM1, FM2, FM3, and AM.

z Tune in the station to be preset.

aPress one of the preset station buttons (1 - 6) for more than 2 seconds until a beep tone is heard.

The number of the pressed preset station button is displayed.

 

w

m

[

J4 Repeat steps 2 and 3 to preset other stations.

Note

As FM1, FM2, and FM3 have the same frequency range, up to 18 stations can be preset for FM.

. When a station is preset on the preset station button on which another station of the same band has already been preset, the previously preset station is automatically erased.

10[