Aiwa AZ-RS1 User Manual
Size:
315.69 Kb
Download

Basic operations

Listening to music

First, send MP3 files to the “pavit” from your computer using the supplied “Music Transfer pavit Edition” software. Refer to the separate manual “Music Transfer pavit Edition” about how to send MP3 files to the “pavit.”

1. Connect the headphones.

Connect the headphones to the i (headphones) jack on the player.

2. Insert the “pavit” into the player.

When the power is turned on, the “pavit” insertion indicator “” will appear in the display.

If there are no music data in the “pavit,” the “pavit” insertion indicator becomes “”.

Align this projection with the groove inside the “pavit” slot.

(Continued)

operations Basic

11

3. Start playback.

VOL /+ Nx/POWER

1Press and hold Nx/POWER.

The power is turned on, a short beep is heard in the headphones (when the HOLD/BEEP switch is set to BEEP ON), and playback starts.

2Press VOL –/+to adjust the volume.

Music data (tracks) are played in the order of the Playlist you created using “Music Transfer pavit Edition.”

During play mode, the track information* and elapsed playing time are displayed. Playback stops after the last track has been played.

*Displayed when the track has ID3 TAG information. If the track does not have ID3 TAG information, the file name is displayed. (ID3 TAG is a format to include textual information, such as title, album name and artist name, in MP3 files.)

If playback does not start

If the HOLD function is set to on, release the HOLD function (page 21).

12

Other operations

VOL /+ Nx/POWER./>

To

Do this

Go to the beginning of the next track

Press >.*1

Go to the beginning of the current track

Press ..

 

 

Go to the beginning of preceding tracks

Press . repeatedly.*1

 

To quickly locate the desired track, press and hold

 

. until you find it.*2

Go to the beginning of succeeding tracks

Press > repeatedly.*1

 

To quickly locate the desired track, press and hold

 

> until you find it.*2

Adjust the volume

Press VOL – /+.

 

Press and hold VOL –/+to quickly turn down or up

 

the volume.

 

 

Stop playback

Press Nx/POWER.*3

Turn off the power

Press and hold Nx/POWER.

 

 

*1 A short beep sounds for each track. When the first track is reached, the player emits a different beep sound. *2 While holding down the button, a short beep sounds for each track. When the first track is reached, the

player emits a different beep sound and playback of the first track will start.

*3 The power will be turned off automatically if the player is not operated for about 10 seconds while playback is stopped.

operations Basic

To remove the “pavit”

Always turn off the power before you remove the “pavit.” The music data or the “pavit” itself might be destructed if you remove the “pavit” with the player’s power turned on.

(Continued)

13

To start playback from the first track

Playback starts from the position where it was last stopped.

To start playback from the first track, press and hold . or> to return to the first track (page 13).

Playback will also start from the first track when:

you remove the “pavit” and insert a different “pavit.”

you reset the player (page 25).

To wear the player on your arm

Wrap the supplied arm band around your arm, etc., and then attach the player to the arm band using the clip.

Using the headphone extension cord

The headphone extension cord makes it easy to use the player while carrying it in your pocket or bag.

1Connect the plug of the headphone extension cord to the i (headphones) jack on the player.

2Connect the headphones to the headphone extension cord.

Note

To prevent the wire from breaking, do not pull on the headphone cord when you connect or disconnect the headphones.

14