Aiwa AV-NW31 User Manual

Size:
569.81 Kb
Download

AV SURROUND RECEIVER

RECEPTOR CON SISTEMA DE SONIDO PERIMÉTRICO PARA AUDIO-VÍDEORECEPTEUR AV SURROUND

AV-NW30

AV-NW31(forHT-NW300,HT-DV2300)

OPERATING INSTRUCTIONS MANUAL DE INSTRUCCIONES MODE D’EMPLOI

En (English)

E (Español)

F (Français)

Owner’s record

For your convenience, record the model number and serial number (you will find them on the rear of your unit) in the space provided below. Please refer to them when you contact your Aiwa dealer in case of difficulty.

Model No.

Serial No. (Lot No.)

AV-NW30/AV-NW31

For assistance and information

call toll free 1-800-BUY-AIWA

(United States and Puerto Rico)

8C-AR6-903-21020615CCK-H-S

U

ENGLISH

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

“CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLEPARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.”

Explanation of Graphical Symbols:

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT SAFETY

INSTRUCTIONS

Read the Operating Instructions carefully and completely before operating the unit. Be sure to keep the Operating Instructions for future reference. All warnings and cautions in the Operating Instructions and on the unit should be strictly followed, as well as the safety suggestions below.

Warning

To prevent electric shock or injury, these safety instructions should be followed in the installation, use and servicing the unit.

Installation

Attachments - Do not use attachments not recommended by the unit manufacturer as they may result in the risk of fire, electric shock or injury to persons.

Water and Moisture - Do not use this unit near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

Heat - Do not use this unit near sources of heat, including heating vents, stoves, or other appliances that generate heat. It also should not be placed in temperatures less than 5˚C (41˚F) or greater than 35˚C (95˚F ).

Mounting surface - Place the unit on a flat, even surface.Accessories - Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury to a child or an adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the unit. Any mounting of the appliance should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

Portable cart - An appliance and cart combination

should be moved with care. Quick stops, excessive force, and uneven surfaces may cause theappliance and cart combination to overturn. Ventilation - The unit should be situated with adequate space around it so that proper heat ventilation is assured. Allow 10 cm clearance from the rear and the top of the unit, and 5 cm from the each side.

Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to ensure reliable operation of the unit and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed, sofa, rug or other similar surface. This unit should not be placed in a built-ininstallation such as a bookcase unless proper ventilation is provided.

Object and Liquid Entry - Never push objects of any kind into this unit through the cabinet slots as they may touch dangerous voltage points orshort-circuitparts that could result in a fire or electric shock. Never spill liquid of any kind on the unit.

Electric Power

Power Sources - This unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. To operate unit on battery power, or other sources, refer to the operating instructions.Grounding or Polarization - This unit is provided with a polarizedalternating-currentline plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

Power-Cord Protection -Power-supplycords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

Overloading - Do not overload wall outlets, extension cords, integral convenience receptacles as this can result in a risk of fire or electric shock.

Outdoor Antenna

Power lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges andbuilt-upstatic charges. Section 810 of the National Electrical Code, ANSI/NFPA No.70, provides information with regard to proper grounding of the mast and supporting structure, grounding of thelead-inwire to an antenna discharge unit, size of grounding conductors, location ofantenna-dischargeunit, connection to grounding electrodes, and requirements for the grounding electrode. See the figure.

2 ENGLISH

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Section 820-40of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Lightning

For added protection for this unit receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and powerline surges.

Maintenance

Cleaning - Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Damage Requiring Service

Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions:

1)When the power cord or plug is damaged.

2)If liquid has been spilled, or objects have fallen into the unit.

3)If the unit has been exposed to rain or water.

4)If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to normal operation.

5)If the unit has been dropped or the cabinet has been damaged.

6)When the unit exhibits a distinct change in performance - this indicates a need for service.

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or having the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

Safety Check - Upon the completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

TABLE OF CONTENTS

 

IMPORTANT SAFETY INSTRUCTIONS ............................

2

PREPARATIONS

 

CONNECTIONS ..................................................................

4

BEFORE OPERATION ........................................................

8

SOUND

 

CUSTOM AUDIO ADJUSTMENT .......................................

9

DSP SURROUND ................................................................

9

BASIC OPERATIONS

 

SELECTION OF AUDIO/VIDEO SOURCE .......................

10

RECORDING AN AUDIO SOURCE .................................

11

RADIO RECEPTION

 

MANUAL TUNING .............................................................

12

PRESET TUNING ..............................................................

12

DOLBY SURROUND AND DTS SURROUND

 

TURNING SURROUND ON AND OFF .............................

13

SETTING SPEAKER SIZE AND DISTANCE ...................

14

ADJUSTING SPEAKER LEVEL BALANCE ....................

15

OTHER SETTINGS ...........................................................

16

TIMER

 

SETTING THE SLEEP TIMER ..........................................

17

GENERAL

 

 

En

CARE AND MAINTENANCE ............................................

17

TROUBLESHOOTING GUIDE ..........................................

17

SPECIFICATIONS .............................................................

18

PARTS INDEX ...................................................................

19

Check your accessories

 

FM antenna Remote control AM antenna

 

Video connecting cord

Coaxial connecting cord

(AV-NW31only)

(AV-NW31only)

Operating Instructions, etc.

For the customers who bought the AV-NW31(for HTNW300 andHT-DV2300)

For the connections and operations of the speaker system and the DVD player, refer also to the operating instructions supplied with the speaker system (for HT-NW300and HTDV2300) or the DVD player (forHT-DV2300).

The optical connecting cord is also supplied to the system HT-DV2300).

ENGLISH 3

PREPARATIONS

CONNECTIONS

Before connecting the AC cord

The rated voltage of your unit shown on the rear panel is 120 V AC. Check that the rated voltage matches your local voltage.

IMPORTANT

CONNECTING EQUIPMENT

Jacks and plugs of the connecting cord are color-codedas follows: Red jacks and plugs: For the rigtht channel of audio signals White jacks and plugs: For the left channel of audio signals Yellow jacks and plugs: For video signals

NOTE

Plug in the AC power cord to the AC outlet after all other connections are made.

Insert the plugs fully into the jacks. Loose connections may produce a humming sound or other noise interference.

DVD, video 2*1, LD*2 or cable TV

to COAXIAL

to VIDEO OUT*4

DIGITAL OUT

 

to AUDIO OUT

Coaxial

 

connecting cord

 

Video 1*1 or MD player

Optical connecting cord

to OPTICAL DIGITAL OUT

to VIDEO OUT (Video 1)

to AUDIO OUT

to VIDEO IN (Video 1)

to AUDIO IN

COAXIAL

*3

 

 

 

TV

(VIDEO 2)

 

 

 

 

OPTICAL

*3

 

 

 

to VIDEO IN

(VIDEO 1)

*3

 

 

 

 

OPTICAL

 

 

 

 

 

 

 

 

 

(DVD)

 

 

 

 

to AUDIO OUT

DIGITAL IN

 

 

 

 

 

VIDEO 2

 

 

 

PCM

DVD

VIDEO 1 / MD

MONITOR

/ DOLBY DIGITAL

/ LD / TV

 

 

 

 

/ DTS

IN

IN

IN

OUT

VIDEO OUT

VIDEO

 

Optical

 

 

 

 

 

 

 

 

connecting cord

L

 

 

 

 

 

 

 

 

AUDIO

 

 

 

 

 

REAR

 

 

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IN

IN IN OUT OUT

IN

IN

IN

 

 

 

DVD

VIDEO 2

VIDEO 1 / MD

TAPE

AUX

CD

 

 

 

/ LD / TV

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CD player

to LINE OUT

to OPTICAL

to VIDEO OUT*4

 

 

 

 

 

 

 

DIGITAL OUT

to AUDIO OUT

 

 

 

 

 

 

 

 

to LINE IN

 

to LINE OUT

 

DVD player

 

 

 

 

 

 

 

 

Tape deck

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

uSignal stream

*1

When connecting a monaural video, use a stereo-mono

*3

 

connecting cord (not supplied).

 

*2

When connecting an LD player equipped with the AC-3RF OUT

 

 

terminal, use an RF demodulator unit. Also connect the analog

 

 

AUDIO OUT terminals of the LD player to the receiver to play

 

 

all the sources. For further information, refer to the instructions

*4

 

of the LD player.

 

Input sound through the DIGITAL IN terminals (COAXIAL (VIDEO 2), OPTICAL (VIDEO 1) and OPTICAL (DVD)) cannot be recorded. When recording the sound from the DVD, CD, MD or LD player, connect the analog AUDIO OUT terminals of the player to the corresponding AUDIO IN terminals of the receiver. With this connection, the picture noise may appear when playing copy protected DVDs. In this case, it is recommended to connect the VIDEO OUT terminal of the DVD player directly to a TV set, not through the receiver.

4 ENGLISH

1 and2 in the illustration correspond to the following details.

1Front speakers

 

2AM antenna

Right

Left

2FM antenna

1Sub woofer

Right

Left

1Center speaker

1Surround speakers

PREPARATIONS

CONNECTING SPEAKERS 1

Speaker terminals

Connect front speakers, a center speaker, surround speakers and a sub woofer to the corresponding speaker terminals on the unit:

-the front speaker cords to the FRONT SPEAKERS terminals

-the center speaker cord to the CENTER SPEAKER terminals

-the surround speaker cords to the SURROUND SPEAKERS terminals

-the sub woofer (with a built-inamplifier) cord to the SUB WOOFER jack, for more powerful bass sounds

-When not connecting the sub woofer, be sure to select “SUBW OFF” (sub woofer off) mode (see the next page).

-When not connecting the center speaker and/or surround speakers, and regarding to the size of speakers (including front speakers), speaker settings must be done. Before using the unit, be sure to make speaker settings in accordance with your speaker configuration (see page 14).

Speaker impedance

For all speakers, use speakers of 8 ohms or more.

Connecting +to +, -to-terminals

To get the proper sound effect, the speaker terminals on the unit and the speaker should be connected with proper polarity; the +terminal on the unit should be connected to the +terminal on the speaker (and -to-).

NOTE

Be sure to connect the speaker cords correctly as shown in the illustration on the right column. Improper connections can cause short circuits in the SPEAKER(S) terminals.

Do not leave objects generating magnetism near the speakers.

Do not put any equipment such as DVD players and speakers on the receiver to assure proper heat ventilation.

Front speakers

Lift up the terminal flap,

 

 

 

 

 

ON

T

 

 

FR

 

RS

insert the speaker cord

 

P

E

A

K

E

L

S

 

 

 

 

 

 

lead into the terminal slot,

 

 

 

 

 

 

 

 

 

 

 

 

then close the flap. Check

 

 

 

 

 

 

 

 

 

 

 

 

that the cord is connected

 

 

 

 

 

 

 

 

 

 

 

 

securely.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Surround speakers

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R

OU

N

D

 

 

 

 

 

 

 

NT

 

 

 

R

 

S

 

 

 

 

 

O

S

SU

R

 

F

R

 

ER

E

A

KE

L

 

 

A

K

 

S

P

 

S

P

E

 

 

L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IMP:

 

 

IMP:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B

F

ER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

U

 

 

 

 

 

 

 

 

 

 

S OO

 

 

 

T

 

 

 

 

 

 

 

W

O

U

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sub woofer

 

 

E

N

T

E

R

 

 

 

 

C

 

R

 

K

E

 

A

 

S

P

E

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

IMP:

 

Center speaker

En

ENGLISH 5

POSITIONING THE SPEAKERS

Position the speakers to make the most of Dolby, DTS or DSP surround effect.

Front speaker (L/R) Center speaker (C)

Position in the center of the two front speakers. In addition, position on or below the TV set, if connecting a TV set to the unit.

Surround speakers (LS/RS)

Place the surround speakers directly to the side of or slightly behind the listening area. Align them horizontally, about 1 meter (3.2 feet) above ear height.

Sub woofer (SW)

Place the sub woofer in any place near the two front speakers.

When not connecting the sub woofer

Select the “SUBW OFF” mode.

1Press and hold SPEAKERS until “FR LARGE” is displayed.

2Within 6 seconds, turn MULTI JOG so that “SUBW ON” is displayed.

3Press ENTER.

4Within 6 seconds, turn MULTI JOG so that “SUBW OFF” is displayed, then press ENTER.

Turning on/off the front speakers

Each time you press SPEAKERS on the front panel, the front speakers are turned on and off. When the front speakers are turned on, “SP3” lights up on the display window.

NOTE

When you turn off the front speakers, the surround mode (Dolby Digital, Dolby Pro Logic or DTS) or the DSP mode will be canceled.

When the front speakers are turned off, SURROUND and DSP on the front panel cannot be used. (“CAN’T USE” will be displayed).

CONNECTING THE SUPPLIED

ANTENNAS 2

Connect the FM antenna to the FM 75Ω terminal and the AM antenna to the AM LOOP jack.

FM antenna

AM antenna

 

 

TENNA

AM

 

AN

 

 

75

 

 

 

 

 

AXIAL)

 

 

FM

 

 

 

(CO

 

 

 

To stand the AM loop antenna on a surface

Fix the claw to the slot as shown in the illustration.

To position the antennas

Keep antennas away from metallic objects, electrical equipment (including the unit itself) and cords.

FM antenna: Extend fully and position for the best reception. If reception is poor, connect an optional outdoor antenna to the FM 75Ω terminal.

AM antenna: Rotate to find best reception.

6 ENGLISH

ABOUT THE REMOTE CONTROL

Inserting batteries

Detach the battery cover on the rear of the remote control and insert two R6 (size AA) batteries.

Replace the batteries with new ones when the operational distance between the remote control and the main unit becomes shorter.

Remove the batteries if the unit is not going to be used for an extended period of time.

The remote control may not operate if it is used under intense sunlight or if its line of sight is obstructed.

Important

ENTER on the remote control substitutes for ENTER on the main unit when the function is TUNER. In other functions, this button is mainly for operating the DVD player (see the right column).

To select the function with the remote control

Press FUNCTION repeatedly. The function changes cyclically.

Operating AIWA equipment with the remote control

You can control the basic functions of AIWA video recorder, TV, DVD player or CD player with the remote control.

Note that there are models that cannot be operated with the remote control.

VIDEO1,

VIDEO2,

TUNER

 

TV,DVD,

 

CD

 

SHIFT

Selecting equipment to be controlled

 

To control video recorders, press either VIDEO 1 or VIDEO 2,

 

whichever allows you to control correctly the video recorder.

 

To control a TV, press TV.

PREPARATIONS

To control a DVD player, press DVD.

 

To control a CD player, press CD.

 

• There are two sets of transmitted codes for CD, VIDEO 1 and

 

 

VIDEO 2.

 

 

To change the code set for CD, hold down CD and press 0,0,1

 

 

or 0,0,2. (When you choose 0,0,2, you can also operate a DVD

 

 

player with the remote control.)

 

 

To change the code set for VIDEO 1 and VIDEO 2, hold down

 

 

VIDEO 1 or VIDEO 2 respectively and press 4,0,0 or 5,3,3.

 

To control the receiver (this unit)

 

 

 

 

 

Press TUNER.

 

 

 

NOTE

 

 

Be sure to press TUNER before operating the receiver (this unit).

 

Operating video recorders

 

Press the following buttons.

 

c- Starts playback.

 

a- Pauses playback.

 

s- Stops playback.

 

f, g- Fast rewind/fast forward

 

TV/VIDEO - Switches between the TV mode and VIDEO mode.

 

POWER - Turns on/off the power.

 

0-9,+10 - Selects channel.

 

G/For k/i- Channel down/up.

 

C - Resets the counter.

 

t/r- Skip forward/back to the next/previous scene.

 

Operating TVs

 

En

Press the following buttons.

TV/VIDEO - Switches between the TV mode and VIDEO mode.

 

 

POWER - Turns on/off the power.

 

0-9,+10 - Selects channel.

 

k/i- Channel down/up.

 

j/l- Decrease/increase volume.

 

Operating DVD players

 

Press the following buttons.

 

POWER - Turns on/off the power.

 

c- Starts playback.

 

a- Pauses playback.

 

s- Stops playback.

 

f,g- Searches for a track.

 

r,t- Skips a track.

 

G,Fwhile pressing SHIFT - Enters slow playback mode.

 

AUDIO while pressing SHIFT - Selects the sound tracks.

 

SUB TITLE while pressing SHIFT - Changes the subtitle

 

language.

 

ANGLE while pressing SHIFT - Changes the picture angle.

 

ON SCREEN while pressing SHIFT - Displays On Screen Display

 

menu.

 

ZOOM while pressing SHIFT - Zooms in the picture.

 

PRGM while pressing SHIFT - Enters the programmed play mode.

 

RANDOM while pressing SHIFT - Enters the random play mode.

 

REPEAT while pressing SHIFT - Enters the repeat play mode.

 

TOP MENU - Displays the title menu.

 

MENU - Displays menu programs.

 

i,k,j,l- Moves the cursor to select a program, etc.

 

ENTER - Executes or fixes the selected item from a menu.

 

vRETURN - Exits the setup menu screen.

 

SET UP - Displays the setup menu.

 

ENGLISH 7

Operating CD players Press the following buttons.

POWER - Turns on/off the power. c- Starts playback.

a- Pauses playback. s- Stops playback.

f,g- Searches for a track. r,t- Skips a track.

0-9,+10 - Selects a track.

PRGM while pressing SHIFT - Enters the programmed play mode. RANDOM while pressing SHIFT - Enters the random play mode. REPEAT while pressing SHIFT - Enters the repeat play mode.

NOTE

There are some AIWA models that cannot be operated with the remote control, or for which some of the functions of the remote control do not work.

BEFORE OPERATION

 

POWER

POWER 6STANDBY/ON

 

SPEAKERS

DISPLAY

DIMMER

 

PHONES

SHIFT

To turn the unit on

Press POWER 6STANDBY/ON (POWER).

The STANDBY/ON indicator lights in green.

Operation is possible after four seconds. The volume level or function name is displayed one after the other for the first four seconds.

To change the brightness level of the display

Press DIMMER (hold down SHIFT and press DISPLAY) repeatedly.

The dimmer mode changes as follows.

DIM-OFF

 

DIMMER 1

 

DIMMER 2

 

 

DIMMER 3 (No display)

DIM-OFF:The normal display

DIMMER 1: The illumination of the display is dimmer than usual. DIMMER 2: The illumination of the display is dimmer. DIMMER 3 (no display): Everything on the display is cleared.

NOTE

While in the mode other than DIM-OFF,if you operate the receiver, the display illuminates at theDIM-OFFlevel, and after 6 seconds, the display brightness returns to the level previously set.

Note that “DIMMER” is displayed for one second before everything is cleared when the previously set level is “no display”.

Using the headphones

Connect headphones with a standard stereo plug (ø6.3 mm, 1/4 inch) to the PHONES jack. Be sure to turn off the speakers by pressing SPEAKERS. Otherwise sound is output from the speakers.

To turn the unit off, press POWER 6STANDBY ON (POWER). The STANDBY/ON indicator turns to red.

8 ENGLISH

SOUND

CUSTOM AUDIO ADJUSTMENT

DSP SURROUND

MASTER VOLUME

MULTI JOG

BALANCE MUTING

DSP

JOG

JOG

+,-

+,-

DSP

TONE

MULTI JOG

BASS

 

 

TREBLE

VOLUME

 

 

+,-

 

 

BALANCE

 

 

MUTING

VOLUME CONTROL

Turn MASTER VOLUME (press VOLUME +,-).Adjust from 0 (minimum) to 49 and MAX (maximum).

Volume level setting is retained during power-offstandby. If the unit is turned off with the volume set to 21 or higher, it is automatically turned down to 20 the next time the unit is turned on.

Left and right balance of the front and surround speakers

1Press BALANCE repeatedly.

L/R 0dB” and “LS/RS 0dB*” appear alternately.

L/R 0dB” means that the left and right front speakers level is the same.

LS/RS 0dB*” means that the left and right surround speakers level is the same.

Select one of them to adjust it.

*This is not displayed in stereo mode (SURROUND off or DSP off) or when the surround speakers are set to “NONE”.

2Turn MULTI JOG (press JOG +,- repeatedly). Example:

L>R 5dB” means that the left front speaker level is 5 dB higher than that of the right front speaker.

LS<RS 10dB” means that the right surround speaker level is 10 dB higher than that of the left surround speaker.

NOTE

The adjustable level ranges from 0 to 10 dB.

The surround speaker balance can be adjusted only when SURROUND or DSP is set to on and the surround speakers are not set to “NONE”.

The DSP (Digital Signal Processor) surround circuits can recreate the effect of sounds reflected from walls or ceilings, to obtain the sound presence of real environments. The unit provides 5 DSP preset modes.

1Press DSP.

2Within 6 seconds, turn MULTI JOG to select the

desired DSP mode.

The “DSP” and “S” (surround speakers) indicators light up.

DISCOHALLLIVECHURCHMOVIE

When the music source is monaural

The DSP system may not work effectively depending on the DSP mode selected.

To cancel the selected mode

Press DSP to display the DSP mode name, and press the button again within 6 seconds. “DSP OFF” appears on the display.

To select with the remote control

1Press DSP.

2Within 6 seconds, press JOG + or - repeatedly until the desired DSP mode is displayed.

NOTE

DSP cannot be turned on when the surround speakers are set to “NONE”.

DSP is automatically canceled when SURROUND is turned on, and vice versa.

Muting the sound temporarily

Press MUTING so that “MUTE ON” appears on the display. The sound is muted.

To return to the previous volume level, press MUTING again. “MUTE OFF” is displayed.

To reset the volume and balance to the default value, press and hold BALANCE until “LVL RESET” is displayed.

All the speaker volume as well as the left and right balance of the front and surround speakers are reset to the default value (0 dB).

SOUND ADJUSTMENT DURING

RECORDING

The output volume and tone of the speakers or headphones may be freely varied without affecting the level of the recording.

BASS AND TREBLE

Turn BASS or TREBLE.

The adjustable level for the bass sound and the treble sound ranges from –10to +10 dB at 2 dB steps.

Adjusting bass and treble with the remote control

SOUND

En

1 Press TONE repeatedly to select BASS or TREBLE.

2 Press JOG + or - to adjust the bass or treble level.

ENGLISH 9

BASIC OPERATIONS

SELECTION OF AUDIO/VIDEO SOURCE

FUNCTION

ENTER FUNCTION

JOG +,-

TV/VIDEO

INPUT

MODE

TUNING

INPUT MODE

1 Turn FUNCTION to select the program source.

The function changes in the following order.

FMAMDVDCD

VIDEO 2VIDEO 1TAPEAUX

The actual source selected (except FM and AM) depends on the equipment connected to the input terminals on the rear panel of the unit.

For example, if an MD player is connected to the VIDEO 1/ MD terminals, select VIDEO 1 to listen to the MD playback sound.

To select with the remote control

Press FUNCTION repeatedly.

2Start the selected program source.

3Adjust the sound.

SELECTION OF VIDEO SOURCE

While selecting a program source which does not contain video input (such as a CD player), you can select a video source separately to be viewed on the TV.

1Press FUNCTION repeatedly to select FM, AM, CD, AUX or TAPE.

2Press TV/VIDEO.

3Press JOG +, -repeatedly.

The video source to be output through the MONITOR VIDEO OUT jack changes in the following order.

M-OUTV1M-OUTV2M-OUTDVD

M-OUT V1: Video image of the equipment connected to the VIDEO 1/MD terminals can be viewed on the TV.

M-OUT V2: Video image of the equipment connected to the VIDEO 2/LD/TV terminals can be viewed on the TV.M-OUT DVD: Video image of the equipment connected to the DVD terminals can be viewed on the TV.

TO CHANGE A DISPLAYED NAME FOR THE VIDEO 1 AND VIDEO 2 FUNCTION

When the VIDEO 1 function is selected, VIDEO 1 is displayed initially. It can be changed to MD.

While pressing ENTER, press INPUT MODE.

The displayed name for the VIDEO 2 function can be changed to VIDEO 2, LD or TV. Select VIDEO 2 function.

While pressing ENTER, press INPUT MODE.

TO SELECT “ANALOG” OR “DIGITAL” MODE OF THE DVD, VIDEO 1 OR VIDEO 2 FUNCTION

Press INPUT MODE when the DVD, VIDEO 1 or VIDEO 2 function is selected. The selected mode “ANALOG” or “DIGITAL” appears on the display.

In DIGITAL mode: Equipment connected to the DIGITAL IN OPTICAL (DVD) terminal is selected as a source for the DVD function, equipment connected to the DIGITAL IN OPTICAL (VIDEO 1) for the VIDEO 1 function, and equipment connected to the DIGITAL IN COAXIAL (VIDEO 2) for the VIDEO 2 function.In ANALOG mode: Equipment connected to the DVD terminals is selected as a source for the DVD function, equipment connected to the VIDEO 1/MD for the VIDEO 1 function, and equipment connected to the VIDEO 2/LD/TV for the VIDEO 2 function.

10 ENGLISH