Aiphone AI-RS150 User Manual

			INSTRUCTION MANUAL
SECURITY SUBSTATION			AI-RS150
			AI-RS160
			AI-RS170
			AI-RS180

Please follow the instructions in this manual to obtain the optimum results from this unit. We also recommend that you keep this manual handy for future reference.

1. GENERAL DESCRIPTION

AIPHONE's AI-RS150,AI-RS160,AI-RS170,andAI-RS180are Security Substations designed to be used with AIPHONE'sAI-900Voice Security System.

2. CONNECTION

Connection to the AI-900RS(for 25 V line)

			Call lamp (AI-RS180only)
(AI-900RS)		AI-RS150/160/170/180
A	Orange		Blue (HOT)
B	Brown		White (COM)
C
	Black		Open collector output
			(AI-RS180only)
		Speaker	Call button

Connection to the external relay (AI-RS180only)

		diode		External
AI-RS180				power supply
Blue (HOT)	-	relay	+
				+24 VDC
White (COM)				GND

Note: AI-RS180open collector output is 30 mA / 24 VDC (max.).

3. OPERATION

Pressing the call button calls the control station. The call lamp then flashes until the conversation begins, and it remains lit during the conversation (AI-RS180only). The open collector output is activated immediately after pushing call buttons and remains active until call is cancelled(AI-RS180only).

4. MOUNTING

Mount the substation to an electrical box mounted to the wall.

2-gangelectrical box (deep) and adapter ring

AI-RS150/160/170/180

Oval head screw (No.6-32UNCx 18)

Dimensional diagram

	46		37
	120

83.5	120

18.2

Unit: mm

								*1	2 (AI-RS150)
3 *1		52.5 *2
								*2	43.5 (AI-RS150)

5. SPECIFICATIONS

Model No.	AI-RS150	AI-RS160	AI-RS170	AI-RS180
Rated Input		1 W
Rated Impedance		625 Ω (1 W, 25 V)
Output Sound Pressure Level		82 dB
Frequency Response		300 to 4,000 Hz (minimum 72 dB)
Internal Speaker		4 cm dynamic type
Sensitivity as Microphone		–40dB ± 3 dB (0 dB = 1 V / Pa)
Ambient Temperature		–10°Cto +50°C
	(Temperature range not to freeze the speaker and switch)
Finish		Stainless steel
Weight	410 g	540 g	540 g	570 g
Weather-ResistantCoating	None	None	Printed circuit board	Printed circuit board
Call Button	Resin-madepush	Metal push button	Metal push button	Metal push button
	button			(red top ø20 mm)
Call Lamp	None	None	None	Provided
Open Collector Output	None	None	None	24 VDC, 30 mA
Accessories	Oval head screw (No. 6-32UNC) x 18 ....... 4

Note: The design and specifications are subject to change without notice for improvement.

Printed in Japan 133-06-234-80