Aiphone 261380 User Manual

Size:
48.7 Kb
Download

Video Output Kit

Aiphone Spare Part #261380

Use with MY-2CD,MYH-2CD&MYW-P3L

- INSTRUCTIONS -

MY-DC

 

MY-2CD

 

A1

 

1A1

 

A2

 

1A2

 

 

 

 

PS-18C

EL-9S

 

+

+

 

-

-

 

 

 

 

L+

 

 

 

L-

 

PT-1210N

 

*

V+ = BLACK

(AC Transformer)

* CN-5

V- = WHITE

 

(internal

 

 

connection)

 

 

2-PINCONNECTOR: Part # 261380:

Description: 2-PinVideo Output connector forMY-2CD/MYW-P3L.

BLACK to core of coax

WHITE to braid of coax

MY-2CD/MYH-2CD:The video signal will only be present when a picture is seen on the monitor that the2-pinconnector is plugged into.

MYW-P3L

 

MYW-P3L:Video signal is present when any monitor is on.

3-Camera

*

V+ = BLACK

BLACK to core of coax

Adaptor for

 

V- = WHITE

LEF/MY

 

 

WHITE to braid of coax

 

* CN-5(Connection at base

system

 

 

 

of PC board, located next to

SW2 and Reset Button)

IMPORTANT!!!

Power down all Aiphone equipment before performing any modifications!

INSTALLATION INSTRUCTIONS:

MY-2CDORMYH-2CD:

NOTE:

BLACK is Hot (to center conductor of coax). WHITE is Ground (to braid of coax).

1.Open monitor from the back by removing four small screws.

2.Locate the 2-pinmale connection (CN5) near the base of the monitor.

3.Plug in 2-pinconnector with black and white leads, and run wires out of the back of the unit, along with the Blue and Yellow wires (existing).

4.Connect the Black and White wires to the coax cable leading to the remote video monitor or recorder.

5.The video signal from this unit is composite, 1V peak to peak. The video signal will only be present when a picture is

seen on the monitor that the 2-pinconnector is plugged into.

MYW-P3L:

1.Open the adaptor from the bottom.

2.At the base of the PC board, locate the 2-pinmale connection(CN-5)next to SW2 and the Reset Switch.

3.Plug in the 2-pinconnector. Connect the Black and White wires to the coax cable leading to the video monitor or recorder.

4.The video signal from this unit is composite, 1V peak to peak. The video signal will only be present when the is present on the monitor that the 2-pinconnector is plugged into.

Aiphone Communication Systems

TOLL FREE TECHNICAL SUPPORT:

 

(800) 692-0200

 

1700 130th Ave. N.E.

 

TOLL FREE FAX LINE:

 

Bellevue, WA 98005

 

(800) 832-3765

 

(425) 455-0510

TECHNICAL SUPPORT E-MAIL:

Video Output

FAX (425) 455-0071

tech-serv@aiphone.com

082898bkjd