AEG HK995070FB User Manual

0 (0)

User’s Manual

HK955070FB 36” Electric Cooktop -

User’s Manual

2 Contents

Thank you for choosing one of our high-quality products.

To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance.

We wish you much joy with your new appliance.

Contents

Safety information

Installation

Description of the appliance

Operating the appliance

On and Off Automatic Switch Off The heat setting

/ Switching the outer rings on and off

The Automatic heat up

Using the Timer

2

Starting the STOP+GO

9

3

Locking / unlocking the control panel

9

The child safety device

9

6

OffSound Control (Switching off and on the

 

7

sounds)

10

7

Helpful hints and tips

10

7

Care and cleaning

11

8

What to do if...

12

 

8

Environment concerns

13

8

 

 

Packaging material

13

8

 

 

Subject to change without notice

Safety information

General safety

WARNING!

Persons (including children) with reduced physical sensory, mental capabilities or lack of experience and knowledge must not use the appliance. They must have supervision or instruction for the operation of the appliance by a person responsible for their safety.

Child safety

Only adults can use this appliance. Children must get supervision to make sure that they do not play with the appliance.

Keep all packaging away from children. There is a risk of suffocation.

Keep children away from the appliance when it is on.

WARNING!

Start the child safety device to prevent small children and pets from an accidental activation of the appliance.

Safety during operation

• Remove all packaging, stickers and layers from the appliance before the first use.

Installation 3

Set the cooking zones to "off" after each use.

Risk of burns! Do not put cutlery or saucepan lids on the cooking surface, as they can become hot.

WARNING!

Fire danger! Overheated fats and oils can ignite very quickly.

Correct operation

Always monitor the appliance during operation.

Only use the appliance for domestic cooking tasks!

Do not use the appliance as a work or a storage surface.

Do not put or keep very flammable liquids and materials, or fusible objects (made of plastic or aluminium) on or near the appliance.

Be careful when you connect the appliance to the near sockets. Do not let electricity bonds touch the appliance or hot cookware. Do not let electricity bonds tangle.

How to prevent a damage to the appliance

If the objects or cookware fall on the glass ceramic, the surface can be damaged.

Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the glass ceramic if you move them on the surface.

Do not let cookware boil dry to prevent the damage to cookware and glass ceramics.

Do not use the cooking zones with empty cookware or without cookware.

Do not cover any part of the appliance with aluminium foil.

WARNING!

If there is a crack on the surface, disconnect power supply to prevent the electric shock.

Installation

Before the installation , note down this data from the rating plate:

Model description (Modell)................

Product number (Prod. Nr.) ............. ....

Serial number (Ser. Nr.) ...............

You find the rating plate of the appliance on its lower casing.

 

 

 

HK955070FB

949 593 337 00

 

 

58 HCD AA A0

220-240 V 50-60 Hz

7,9 kW

AEG-ELECTROLUX

4 Installation

Safety instructions

WARNING!

You must read these!

Make sure that the appliance is not damaged because of transportation. Do not connect a damaged appliance. If it is necessary, speak to the supplier.

Only an authorised service technician can install, connect or repair this appliance. Use only original spare parts.

Only use built-in appliances after you assemble the appliance into correct built-in units and work surfaces that align to the standards.

Do not change the specifications or modify this product. Risk of injury and damage to the appliance.

Fully obey the laws, ordinances, directives and standards in force in the country where you use the appliance (safety regulations, recycling regulations, electrical safety rules etc.)! Keep the minimum distances to other appliances and units!

Install anti-shock protection, for example install the drawers only with a protective floor directly below the appliance!

Protect the cut surfaces of the worktop against moisture with a correct sealant! Seal the appliance to the work top with no space left with a correct sealant!

Protect the bottom of the appliance from steam and moisture, e.g. from a dishwasher or oven!

Do not install the appliance adjacent to doors and below windows! If not, hot cookware can be hit off the hob when you open doors or windows.

WARNING!

Risk of injury from electrical current. Carefully obey the instructions for electrical connections.

The electrical mains terminal is live.

Make electrical mains terminal free of voltage.

Install correctly to give anti-shock protection.

Loose and incorrect plug and socket connections can make the terminal become too hot.

A qualified electrician must install the clamping connections correctly.

Use a strain relief clamp on cable.

Use the correct mains cable of type H05BB-F Tmax 90°C (or higher) for a single-phase or two-phase connection.

Replace the damaged mains cable with a special cable (type H05BB-F Tmax 90°C; or

higher). Speak your local Service Force Centre.

The appliance must have the electrical installation which lets you disconnect the appliance from the mains at all poles with a contact opening width of minimum 3 mm.

You must have correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.

Sticking on the seal

Clean the worktop in the area of the cut-out section.

Bond the sealing tape to the lower edge of the cooking surface along the outer edge of the glass ceramic. Do not extend it. Let stay the cut ends in the middle of one side. When you have cut it to length (add some mm), push the two ends together.

AEG HK995070FB User Manual

Installation 5

Assembly

 

min.

min. 500 mm

50 mm

min.

 

 

50 mm

=

R 5mm

 

 

600mm

 

 

 

490

+1

mm

880+1mm

 

 

 

=

 

 

min.

min.

25 mm

30 mm

min. 20 mm

Loading...
+ 10 hidden pages