AEG HK654070XB User Manual

0 (0)

User’s Manual

HK654070XB 24” Electric Cooktop -

User’s Manual

2

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

ACCESSORIES AND CONSUMABLES

In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly. Along with a wide range of accessories designed and built to the high quality standards you would expect, from specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags…

Visit the webshop at:

www.aeg.com/shop

Contents 3

CONTENTS

4 Safety information

5 Installation instructions

7 Product description

8 Operating instructions

12 Helpful hints and tips

13 Care and cleaning

14 What to do if…

15 Environment concerns

15 Warranty

The following symbols are used in this user manual:

Important information concerning your personal safety and information on how to avoid damaging the appliance.

General information and tips

Environmental information

Subject to change without notice

4 Safety information

SAFETY INFORMATION

For your safety and correct operation of the appliance, read this manual carefully before the installation and use. Always keep these instructions with the appliance also if you move or sell it. The users must fully know the operation and safety functions of the appliance.

Children and vulnerable people safety

WARNING!

Do not let persons, children included, with reduced physical sensory, reduced mental functions or lack of experience and knowledge to use the appliance. They must have supervision or instruction for the operation of the appliance by a person who is responsible for their safety.

Keep all packaging away from children. There is the risk of suffocation or injury.

Keep the children away from the appliance during and after the operation, until the appliance is cold.

WARNING!

Activate the child safety device to prevent small children and pets from an accidental activation of the appliance.

Safety during operation

Remove all packaging, stickers and layers from the appliance before the first use.

Set the cooking zones to "off" after each use.

The Risk of burns! Do not put cutlery or saucepan lids on the surface that you cook, as they can become hot.

WARNING!

Fire risk! Too hot fats and oils can occur with ignition very quickly.

Correct operation

Always monitor the appliance during operation.

The appliance is only for domestic use!

Do not use the appliance as a work or a storage surface.

Do not put or keep very flammable liquids and materials, easy fusible objects (made of plastic or aluminium) on or near the appliance.

Be careful when you connect the appliance to the near sockets. Do not let the electricity bonds touch the appliance or hot cookware. Do not let the electricity bonds to tangle.

How to prevent a damage to the appliance

If the objects or cookware fall on the glass ceramic, the surface can be damaged.

Cookware made of cast iron, cast aluminium or with damaged bottoms can cause scratch of the glass ceramic. Do not move them on the surface.

Do not let cookware boil dry to prevent the damage to cookware and glass.

Do not use the cooking zones with empty cookware or without cookware.

Installation instructions

 

5

 

 

• Do not put the aluminium foil on the appliance.

WARNING!

If there is a crack on the surface, disconnect power supply to prevent the electrical shock.

INSTALLATION INSTRUCTIONS

Before the installation, note down the serial number (Ser. Nr.) from the rating plate.The rating plate of the appliance is on its lower casing.

HK654070XB

949 595 011 00

58 HAD 56 AO

220-240 V 50-60-Hz

7,1 kW

AEG

The Safety Instructions

WARNING!

You must read these!

Make sure that the appliance is not damaged because of transportation. Do not connect a damaged appliance. If it is necessary, speak to the supplier.

Only an authorized servicing technician can install, connect or repair this appliance. Use only original spare parts.

Only use the built-in appliances after you assemble the appliance into correct built-in units and work surfaces that align to the standards.

Do not change the specifications or change this product. Risk of injury and damage to the appliance.

Fully obey the laws, ordinances, directives and standards in force in the country where you use the appliance (safety regulations, recycling regulations, electrical safety rules etc.)!

Keep the minimum distances to other appliances and units!

Install shock protection, for example install the drawers only with a protective floor directly below the appliance!

Keep safe the cut surfaces of the worktop from moisture with a correct sealant!

Seal the appliance to the work top with no space between with a correct sealant!

Keep safe the bottom of the appliance from steam and moisture, e.g. from a dishwasher or oven!

Do not install the appliance adjacent to doors and below windows! If not, when you open the doors or windows they can push off hot cookware from the appliance.

WARNING!

Risk of injury from electrical current. Carefully obey the instructions for electrical connections.

The electrical mains terminal is live.

Make electrical mains terminal free of voltage.

AEG HK654070XB User Manual

6Installation instructions

Install correctly to give shock protection.

Loose and incorrect plug and socket connections can make the terminal become too hot.

A qualified electrician must install the connections in the clamps correctly.

Use a strain relief clamp on cable.

Use the correct mains cable of type H05BB-F Tmax 90°C (or higher) for a single phase or two phase connection.

Replace the damaged mains cable with a special cable (type H05BB-F Tmax 90°C; or higher). Speak your local Service Centre.

The appliance must have the electrical installation which lets you disconnect the appliance from the mains at all poles with a contact opening width of minimum 3 mm.

You must have correct devices to isolate: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.

Assembly

 

 

min.

 

 

500mm

min.

R 5mm

min.

600mm

50mm

50mm

490+1mm 560+1mm

 

=

 

 

=

min. 25 mm

min. 20 mm

min. 28 mm

Loading...
+ 13 hidden pages