AEG-Electrolux PWE3810-M User Manual

0 (0)

PWE3810-M

User Manual

Refreshment Centre

2 Contents

Contents

Safety information

2

Unit positioning

7

Appliance description

4

Unit connection

12

Main components

4

Usage

16

Rating plate

5

Maintenance and cleaning

17

Technical specifications

6

Signals for users

23

Package content

6

What to do if...

24

Installation

7

Environment concerns

25

Safety information

Fundamental safety warnings

Warning The appliance must be earthed in compliance with legislation. Electrical and Water connection must be carried out by qualified technicians following the instructions

Warning Keep all packaging (plastic bags, polystyrene foam) away from children

Warning The appliance is not to be used by people (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety

Warning In order for children not to play with the appliance, a close supervision is required

Warning Do not grasp the appliance when it is out of the cabinet. Do not rest recipients containing liquids or inflammable or corrosive materials on top of the appliance

Warning Do not use the appliance when extracted, except for installation, maintenance and “What to to do if...” sections. For any other operation make sure the appliance is inactive

Warning Water leakage will occur when the discharge tap is open

Instructions

Read these instructions carefully before using the appliance.

Keep the instructions

Failure to respect these instructions may result in injuries or in damages to the appliance The manufacturer is not liable for damage deriving from failure to respect these instructions

Use original or manufacturer recommended accessories and spare parts only.

Safety information 3

Designated use

Warning This is a household appliance only

It is not intended to be used in:

Staff kitchen areas in shops

Offices and other working environments

Farm houses

By clients in hotels, motels, and other residential type of environments

Bed and breakfast type of environments

The appliance is designed and made to supply water and ice. Other uses are considered improper. This appliance is not suitable for commercial use. The manufacturer is not liable for damage deriving from improper use of the appliance.

Electrical safety

Warning The appliance must be earthed in compliance with legislation. Electrical connection must be carried out by qualified technicians following the instructions

Warning This is an electrical appliance, it is therefore important to respect the following safety warnings:

Never touch the plug with wet hands.

Make sure the socket is freely accessible at all times, enabling the appliance to be unplugged when necessary.

If the appliance is faulty, do not attempt to repair it. Turn it off using the power switch, unplug from

the main socket and contact your local Service Force Centre.

Check that the main power supply voltage corresponds to the value indicated on the rating plate on the left side of the appliance. Connect the appliance to an efficiently earthed and correctly installed socket. If the power socket does not match the plug on the appliance, have the socket replaced with a suitable type by a qualified professional. Do not use multiple sockets or extensions.

During installation and Use

Warning Move the appliance carefully in order not to damage components of the refrigeration circuit and to avoid gas leaks

Warning Avoid prolonged exposure of the appliance to direct sunlight

Warning When installing the appliance do not over bend hoses

After removing the packaging, make sure the product is complete and undamaged and that all components are present.

Do not use the appliance if it is visibly damaged. Contact your local Service Force Centre.

Installation must be carried out by qualified professional in compliance with legislation in force in the country of installation.

The packing elements (plastic bags, polystyrene foam, etc.) should be kept out of reach of children.

Do not install the appliance in rooms where the temperature may raise up to 35°C or above.

4 Safety information

Surface treatment

Warning Before performing any washing operation, the appliance must be switched off and unplugged from the power supply

Warning Do not use solvents or abrasive detergents. A soft damp cloth will suffice

Environmental protection

Electrical appliances must not be disposed of as household waste. Appliances with this symbol are covered by European Directive 2002/96/EC. All unused electric and electronic appliances must be disposed of separately from household waste and taken to country-authorised special centres.

Appliance description

Refreshment Centre is a household appliance that refrigerates, purifies and carbonates the water from the mains and makes ice shards.

Its two nozzles dispense:

Ambient water

Cold sparkling water

Cold still water

Ice shards

Main components

Refreshment Centre's main components

1Stainless steel front frame

2Water discharge nozzle

3Water dispense nozzle

4Control panel (icons and LEDs)

5Ice dispensing nozzle

6Drip tray

7CO pressure reducer

Main components 5

8Filter head

9CO bottle

10Water pressure reducer

11Water discharge tap

12Water inlet

13Filter cartridge

14Rating plate

15Power switch

16Power supply socket

Rating plate

Under no circumstances should you attempt to repair the machine yourself. Repair carried out by inexperienced people could cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts.

When contacting your local Service Force Centre, you will be asked to give the data and the feature information of the Refreshment Centre, to be found in the rating plate on the left side of the appliance.

1Rating plate

6 Technical specifications

Technical specifications

 

Technical specifications

Power Supply Voltage

230-240 V

Frequency

50 Hz

Power consumption

MAX 260 W

Cold still water dispense capacity

2lt @ 1 l/min.

Cold sparkling water dispense capacity

2lt @ 1 l/min.

Ice shards

200g / 2h

Dispense temperature

< 13°C

Water mains pressure (water inlet)

> 0.2 MPa (> 2 bar), < 0.6 MPa (< 6 bar)

CO pressure

> 0.25 MPa (> 2.5 bar), < 0.40 MPa (< 4 bar)

Filtration

0.5 micron

Filter capacity

2840 litres

Climatic class

SN (> +10°C, < +32°C)

Dimensions W x D x H

594x578x378 mm

Weight

34 Kg

Refrigerant gas

R134a – 62gr

Package content

After removing the packaging, make sure the product is complete and undamaged and that all components are present.

Move it carefully avoiding shocks or downfalls that may damage the refrigeration circuit. The package contains the following material:

Refreshment Centre

2 sliding rails

Spacers 2x1mm, 2x2mm, 2x3mm

2 support brackets

Frontal spacer

Water inlet hose

Filter cartridge

Plastic hose for water tank discharge

Rechargeable CO bottle with adapting junction or disposable CO bottle

CO pressure reducer

Cleaning cartridge

Neutral detergent

Safety strip to fix CO bottle

8 4.5x16mm self threading screws for support brackets

4 M6x12 circular spacers

3 M4x12 screws for frontal spacer

2 M4x12 screws to fix the Refreshment Centre to sliding rails

Installation 7

Installation

Warning It is necessary to install the appliance properly. The power supply and water connection data in the Technical Specifications chart must be observed

Unit positioning

Check for minimum requirements

Spacers installation

Support brackets installation

Sliding rails installation

Positioning in the kitchen cabinet

Frontal spacer installation

Unit connection

Secure water discharge tap

Pressure reducer first installation

CO bottle first installation

Water mains connection

Filter cartridge first installation

Electrical connection

Unit positioning

Warning The installation of the product should be made above the level of the water mains

Warning To ensure proper ventilation, leave a gap at the bottom of the cabinet (see measurements in the drawing)

Warning The installation of the Refreshment Centre in direct conjunction with an oven might cause performance reduction

Warning Safety cut-out devices must be fixed properly so that they cannot be removed without tools

Check for minimum requirements

Verify the minimum measurements required for a correct installation of the appliance.

 

 

 

 

 

 

x

 

 

 

 

 

a

 

 

 

 

m

 

 

 

 

m

 

 

 

 

m

 

 

 

 

8

 

 

 

 

5

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

mm873

 

 

 

 

 

 

am

 

 

 

 

 

 

x

 

 

 

 

 

560 m

 

 

 

 

 

 

m

AEG-Electrolux PWE3810-M User Manual

8 Unit positioning

The Refreshment Centre must be installed in a cabinet and the cabinet must be firmly fixed to the wall.

 

 

 

 

 

 

 

 

 

 

m

 

 

 

 

 

 

 

 

 

 

 

m

 

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

m

 

 

 

 

 

 

 

 

 

 

 

 

m

 

 

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

m

 

 

 

 

 

 

 

 

 

 

 

m

 

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

+2 mm

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

m

 

 

 

 

 

 

 

 

 

 

 

 

m

 

 

 

 

 

 

 

 

 

 

 

 

0

 

 

5

 

 

 

 

380

 

 

 

 

4

 

 

 

60

 

 

 

 

 

 

 

m

 

 

 

 

+

 

 

 

 

m

 

 

 

 

 

 

8

m

 

 

0

 

 

 

 

 

in

 

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

m

 

 

 

 

m

 

 

 

 

 

 

 

m

 

 

 

 

 

 

 

 

 

 

 

 

m

 

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

m

 

 

 

 

 

 

 

 

 

 

 

 

m

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

 

 

 

225 cmq min

 

 

 

 

 

 

 

 

 

Leave room behind the appliance as described in these instructions to avoid overheating.

40 mm min

520 mm min

Spacers installation

To ensure a smooth installation of the appliance, you need the same internal width as shown in the picture below. Use the provided spacers to adjust internal width.

For their correct positioning, place the spacers directly in contact with both the shelf and the side of the cabinet.

Support brackets installation

 

 

560 m

 

 

 

After positioning the spacers, place the two provided

.

 

m

 

 

 

Unit positioning 9

For a correct installation, take the single support bracket and place it directly in contact with both the shelf of the cabinet and the spacer if previously used. Otherwise the bracket will be in direct contact with both shelf and side of the cabinet.

After this first phase, align the support brackets to be flush with the front of the cabinet.

Use the upper holes to correctly mount the appliance at

the right height.

Warning Mount the screws perpendicularly to the cabinet in order to guarantee the correct extraction of the sliding rails

A pilot hole is recommended for an easier assembly. Extract the screws to continue the mounting.

Sliding rails installation

Position each rail on the side of the cabinet. Please note that there is a specific sliding rail for each side of the cabinet.

Each sliding rail should be flush with the support brackets, with spacers when present and with the front of the cabinet.

1Spacer

2Sliding rail

3Support bracket

Loading...
+ 18 hidden pages