AEG-Electrolux F43470I-W, F43470I-M, F43470I-B User Manual

0 (0)

FAVORIT 43470 I

Dishwasher

User information

PERFEKT IN FORM UND FUNKTION

Dear customer,

Please read this User Information carefully and keep it to refer to at a later date.

Pass it on to any subsequent owner of the appliance.

The following symbols are used in the text:

Safety instructions

Warning! Notes that concern your personal safety.

Attention! Notes that show how to avoid damage to the appliance.

Useful tips and hints

Environmental information

Your dishwasher has the new washing system ”IMPULSE WASHING”. With this dishwashing system the motor speed and spray pressure are varied during the wash cycle to achieve better cleaning of the dishes. It is for this reason that the noise level varies during the dishwashing cycle.

2

 

Contents

 

 

CONTENTS

 

Operating instructions

4

Safety

4

Appliance features

5

Control panel

6

Prior to using for the first time

7

Setting the water softener

7

Adding special salt

9

Adding rinse aid

10

Activating/deactivating the inflow of rinse aid

11

In daily use

12

Loading cutlery and dishes

12

Adjusting the height of the upper basket

15

Adding detergent

16

Using 3 in 1 detergent tablets

17

Selecting the programme (Programme Table)

18

Starting a programme

19

Switching off the dishwasher

20

Care and cleaning

21

What to do when...

22

Technical data

25

Notes for Test Institutes

26

Installation and connection instructions

27

Safety information for the installation

27

Installing the dishwasher

28

Connecting the dishwasher

29

Electrical connection

31

Service

32

 

 

3

Operating instructions

OPERATING INSTRUCTIONS

Safety

Prior to using for the first time

• Follow the ”Instructions for installation and connection”.

Correct use

The dishwasher is only meant for washing domestic dishes.

Additions or modifications to the dishwasher are not permitted.

Use only special salt, detergent and rinse aid suitable for domestic dishwashers.

Do not put any solvents in the dishwasher. This could cause an explosion.

Child safety

Keep packaging away from children. There is a risk of suffocation.

Children often do not recognise the hazards associated with electrical appliances. Don’t allow children to use the dishwasher unsupervised.

Make sure that children and pets don’t climb into the dishwasher. Could endanger life!

Dishwasher detergents can cause chemical burns to the eyes, mouth and throat. Could endanger life! Comply with the safety instructions of the dishwasher detergent manufacturer.

The water in the dishwater is not for drinking. There is a risk of chemical burns.

General safety

Repairs to the dishwasher are only to be carried out by qualified service engineers.

When the dishwasher is not being used, switch it off and close the water tap.

Never unplug the appliance by pulling on the cable. Always pull the plug.

Never sit or stand on the open door.

If the dishwasher is located in a room where there may be a frost, remove the connection hose from the tap after each use of the dishwasher.

4

AEG-Electrolux F43470I-W, F43470I-M, F43470I-B User Manual

Operating instructions

Appliance features

Upper spray arm

Water hardness switch

Container for

Lower spray arm

 

special salt

Filters

 

Dispenser for

Dispenser for

detergent

rinse aid

 

Rating plate

5

Operating instructions

Control panel

Programme Programme

buttons

sequence indicators

 

ON / OFF

1 2 3

Control

button

Function

indicators

 

Select 3 in 1

 

buttons

function

 

 

The ON/OFF button is used to turn the dishwasher on and off.

The Programme buttons are used to select the desired dishwashing cycle.

Function buttons: In addition to the dishwashing cycle and/or start delay selected, the following functions can also be set with the help of these buttons:

Function button 1

Set the water softener

Function button 2 Activate/deactivate rinse aid inflow

Function button 3

- not programmed -

The programme Sequence Indicators always indicates the current part of the sequence.

The Control Indicators have the following meanings:

SALZ 1

Refill with special salt

KLARSPÜLER 1

Refill with rinse aid

1)The indicators are never illuminated while a dishwashing cycle is running.

6

Operating instructions

Prior to using for the first time

1.Set the water softener

2.Fill up with special salt for water softener

3.Fill up with rinse aid

If you use 3 in 1 detergent, do the following:

Switch on the dishwasher, press the 3 in 1 button. The indicator lamp illuminates, the 3 in 1 function is selected. As a result

there is no need to fill up with special salt or rinse aid.

there is no need to set the water softener.

there is no need to activate/deactivate the rinse aid inflow.

Before the start of the dishwashing cycle put 3 in 1 detergent in the detergent dispenser.

Read the section “Using 3 in 1 detergent”.

Setting the water softener

To avoid scale deposits on the dishes and in the dishwasher, the dishes must be washed with soft water, i.e. water with a low lime content. The water softener must be set according to the table to the water hardness in the area where you live. Your local water company will be able to give you information about the water hardness in your area.

The dishwasher must be switched off. The water softener must be set manually and electronically:

Setting manually:

1.Open the dishwasher door.

2.Remove the lower basket from the dishwasher.

3.Turn the hardness range switch to 1 or 2 (see table).

AA07

7

Operating instructions

Setting electronically:

1.Press the ON/OFF button.

If indicators other than the ON/OFF button are lit, a programme has been selected. The programme must be cancelled:

Press function buttons 2 and 3 simultaneously for approx. 2 seconds. All other indicators will go out.

2.Press function buttons 2 and 3 simultaneously and keep them pressed. The LED indicators for function buttons 1 to 3 will flash.

3.Press function button 1 again.

The LED indicator for function button 1 will flash, at the same time the indicator light ENDE starts to flash.

The current level is indicated by the number of flashes of the indicator light ENDE.

4.Pressing function button 1 increases the hardness setting by 1. (Exception: hardness setting 1 follows hardness setting 10).

5.When the hardness setting is correct, press the ON/OFF button. The hardness setting is now saved.

If the water softener is set electronically to “1”, this switches off the

control indicator for special salt.

 

Water hardness

 

 

 

Adjusting the hardness

 

 

 

 

 

 

 

setting

 

Number of

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

in °d 1

 

in mmol/l 2

 

Range

 

Manual

 

 

Electronic

 

flashes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

51

- 70

 

9,0 - 12,5

 

 

 

 

 

 

10

 

10

43

- 50

 

7,6 - 8,9

 

 

 

 

 

 

9

 

9

37

- 42

 

6,5 - 7,5

 

IV

 

*2

 

 

8

 

8

29

- 36

 

5,1 - 6,4

 

 

 

 

 

7

 

7

23

- 28

 

4,0 - 5,0

 

 

 

 

 

 

6

 

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

19

- 22

 

3,3 - 3,9

 

III

 

 

 

 

5

 

5

15

- 18

 

2,6 - 3,2

 

 

 

 

 

4*

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11 - 14

 

1,9 - 2,5

 

II

 

 

 

 

3

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

- 10

 

0,7 - 1,8

 

I/II

 

1

 

2

 

2

 

 

 

 

 

 

 

 

 

 

 

 

unter 4

 

unter 0,7

 

I

 

1

1

 

 

 

 

 

no salt

necessary

1)(°d) German degree, measure of water hardness

2)(mmol/l) millimol per litre, international unit for water hardness

*) factory setting

8

Operating instructions

Adding special salt

Only use special salt suitable for domestic dishwashers. If you don’t use 3 in 1 detergent add special salt:

-Before using the dishwasher for the first time.

-When the indicator for special salt is illuminated on the control panel.

1.Open the door and remove the lower basket.

2.Screw open the lid on the salt dispenser by turning it anticlockwise.

SALE

ZO

UT

T

SAL

 

SALZ

 

SEL

3.

Only when using the dishwasher

 

 

for the first time:

 

 

Fill the salt dispenser with water.

 

4.

Place the funnel (supplied) over the

 

 

dispenser opening.

SR14

 

Fill the dispenser with special salt;

 

 

 

the capacity of the dispenser is

approx. 1.0-1.5 kg, depending on the size of the grains. Do not overfill the dispenser.

If water overflows when filling up with special salt, this is completely harmless.

5.Clean away any salt remnants from the dispenser opening.

6.Screw the lid back on in a clockwise direction.

7.Run a dishwashing cycle after filling the salt dispenser with special salt. This will wash away salt water and any salt crystals that have been spilt.

Depending on the size of the salt grains, it can take several hours for the salt to dissolve in the water and for the SALT indicator to go out.

9

Operating instructions

Adding rinse aid

With rinse aid the rinsing water drains away better and so you get smear-free, gleaming dishes and clear glasses.

Only use special rinse aid for dishwashers and no other liquid detergents.

If you don’t use 3 in 1 detergent add rinse aid:

-Before using the dishwasher for the first time.

-When the indicator for rinse aid is illuminated on the control panel.

1.Open the door. The rinse aid compartment is located on the inside of the dishwasher door.

2.Press the release button on the rinse aid compartment.

3.Open the cover.

4.Pour rinse aid in slowly right up to the broken “max” line;

this corresponds to a volume of approx. 140 ml when full.

5.Press the lid shut until it clicks into place.

6.Wipe up any spilt rinse aid with a cloth. Otherwise too much foam will be formed when rinsing.

BR17

BR14

Setting the amount of rinse aid required

Only change the amount dispensed, if smears, milky spots or dried on water spots can be seen on glasses and dishes. (See section “If wash results are not satisfactory”). The dosage can be set from 1-6. The dosage is set to “4” in the factory.

10

Operating instructions

1.Open the door of the dishwasher.

2.Press the release button on the rinse aid compartment.

3.Open the cover.

4.Set the dosage level.

5.Press the lid shut until it clicks into place.

6.If rinse aid has leaked out, wipe it away with a cloth.

BR09

Activating/deactivating the inflow of rinse aid

If you press 3 in 1 button, you don’t need to deactivate the inflow of rinse aid.

When the inflow of rinse aid has been deactivated, the rinse aid indicator light on the control panel is automatically deactivated.

1.Press the ON/OFF button. The ON/OFF indicator light illuminates.

If other push button indicator lights are on, this means that a wash programme has been selected. The programme must be cancelled: press simultaneously the function push buttons 2 and 3 for approx. 2 seconds. All other indicators will turn off.

2.Press simultaneously function push buttons 2 and 3 until the indicator lights of the function push buttons 1 to 3 start flashing.

3.Press the function push button 2, the indicator lights of function push buttons 1 and 3 turn off while the indicator light of the function push button 2 goes on flashing, at the same time the indicator light ENDE illuminates indicating that the inflow of rinse aid is active.

4.To deactivate the inflow of rinse aid, press the function push button 2 again, the indicator light ENDE turns off, indicating that the inflow of rinse aid has been deactivated.

5.To memorise the operation, switch off the dishwasher by pressing the ON/OFF push button or wait about 60 seconds after which the dishwasher will automatically return to setting mode.

To activate the inflow of rinse aid follow the above instructions until the indicator light ENDE illuminates.

11

Loading...
+ 25 hidden pages