AEG-Electrolux 76331 KF-N, 76331KF-N 13S User Manual

76331 KF-N

User Manual	Ceramic glass hob
Notice d’utilisation	Table de cuisson
Gebruiksaanwijzing	vitrocéramique
	Glaskeramische
	kookplaat

2

Dear Customer

Thank you for choosing one of our high-quality products.

With this appliance you will experience the perfect combination of functional design and cutting edge technology.

Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence.

In addition to this you find environmental and energy saving aspects as an integral part of our products.

To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently.

To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance.

We wish you much joy with your new appliance.

The following symbols are used in this user information:

1Warning! This must be read! Important advice for the safety of persons and information on avoiding damage to the appliance

3General information and advice

2Information on environmental protection

zDangerous voltage

3

Contents

Safety instructions	4
Description of the Appliance	6
Cooking surface layout	6
Control panel layout	6
Touch Control sensor fields	7
Displays	8
Residual heat indicator	8
Operating the appliance	9
Switching the appliance on and off	9
Selecting the heat setting	9
To switch the outside ring on and off	10
Locking/unlocking the control panel	10
Switching the STOP+GO function on and off	11
Using the automatic warm-up function	11
Using the child safety device	13
Using the timer	14
Automatic switch off	17
Tips on cooking and frying	18
Cookware	18
Energy saving	18
Examples of cooking applications	19
Cleaning and care	20
What to do if …	21
Disposal	22
Installation Instructions	23
Safety instructions	23
Electrical Connection Diagram	24
Guarantee/Customer Service	25
Service and Spare Parts	29
Assembly	89
Rating Plate	92

4 Safety instructions

Operating Instructions

1 Safety instructions

Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty.

Correct use

•This appliance is not intended for use by children or other persons whose physical, sensory or mental capabilities or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction by a responsible person to ensure that they can use the appliance safely.

•Do not leave the appliance unattended during operation.

•This appliance should be used only for normal domestic cooking and frying of food.

•The appliance must not be used as a work surface or as a storage surface.

•Additions or modifications to the appliance are not permitted.

•Do not place or store flammable liquids, highly inflammable materials or fusible objects (e.g. plastic film, plastic, aluminium) on or near the appliance.

Child safety

•Small children must be kept away from the appliance.

•Only let bigger children work on the appliance under supervision.

•To avoid small children and pets unintentionally switching the appliance on, we recommend activation of the child safety device.

General safety

•The appliance may only be installed and connected by trained, registered service engineers, or competent persons.

•Built-in appliances may only be used after they have been built in to suitable built-in units and work surfaces that meet standards.

•In the event of faults with the appliance or damage to the glass ceramic (cracks, scratches or splits), the appliance must be switched off and disconnected from the electrical supply to prevent the possibility of an electric shock.

•Repairs to the appliance must only be carried out by trained registered service engineers.

Safety instructions
	5

Safety during use

•Overheated fats and oils can ignite very quickly. Warning! Fire hazard!

•There is the risk of burns from the appliance if used carelessly.

•Remove stickers and film from the glass ceramic.

•Cables from electrical appliances must not touch the hot surface of the appliance or hot cookware.

•Switch the cooking zones off after each use.

Safety when cleaning

•For cleaning, the appliance must be switched off and cooled down.

•For safety reasons, the cleaning of the appliance with steam jet or high-pres- sure cleaning equipment is not permitted.

How to avoid damage to the appliance

•The ceramic glass can be damaged by objects falling onto it.

•The edge of the ceramic glass can be damaged by being knocked by the cookware.

•Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the ceramic glass if pushed across the surface.

•Objects that melt and things that boil over can burn onto the ceramic glass and should be removed straightaway.

•To avoid damaging cookware and glass ceramics, do not allow saucepans or frying pans to boil dry.

•Do not use the cooking zones with empty cookware or without cookware.

6 Description of the Appliance

Description of the Appliance

Cooking surface layout

Single cooking zone 1200 W			Multi-purpose zone 1500/2400 W

Triple cooking zone 800/1600/2300 W

Control panel

Single cooking zone 1200 W

Control panel layout

Child lock with pilot	Cooking zone indicators		Multi-purpose zone
light		Timer function	switch with pilot light
STOP+GO	Automatic warm-	Timer display	Heat setting indicator
with pilot light	up function

Triple ring cooking zone switch with

Heat setting selection

pilot lights

On/Off

Timer

with power indicator

Description of the Appliance
	7

Touch Control sensor fields

The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals. Touch the sensor fields from above, without covering other sensor fields.

	Sensor field	Function
	On / Off	Switches appliance on and off
	Child lock	Locking control panel for children
	Stop+Go	To switch the Keep Warm setting on/
		off
	Triple zone touch control	Switches outside zones
		on and off
TIMER	Timer	Timer selection
	Increase settings	To increase Timer time
	Reduce settings	To reduce Timer time
	Multi-purpose zone	To switch the outside ring on and off
	Automatic warm-up func-	To switch automatic warm-up func-
	tion	tion on/off

Control bar

The control bar is a special Touch Control field. The control bar is touched where the de-

sired heat setting is positioned. The heat setting is shown in the display. Correct to the left or the right, if necessary.

Do not release before the desired heat setting is reached.

3If the control bar is touched for longer than 6 seconds, a signal sounds and the appliance switches itself off.

8 Description of the Appliance

Displays

	Display	Description
		Cooking zone is switched off
/	Keep Warm setting	STOP+GO function / Keep Warm
		setting is set
-	Heat settings	Heat setting is set
	Automatic warm up func-	Automatic warm-up function is acti-
	tion	vated
	Fault	Malfunction has occurred
	Residual heat	Cooking zone is still hot
	Child safety device	Child safety device is engaged
	Automatic switch off	Switch off is active.

Residual heat indicator

1Warning! Risk of burns from residual heat. After being switched off, the cooking zones need some time to cool down. Look at the residual heat indicator .

3Residual heat can be used for melting and keeping food warm.

Operating the appliance
	9

Operating the appliance

Switching the appliance on and off

	Control panel		Display	Pilot light
Switch on	Touch	for 1 second	/	lights up
Switch off	Touch	for 1 second	/ none	goes out

3After switching on, within approx. 10 seconds a heat setting or a function must be set, otherwise the appliance automatically switches itself off.

Selecting the heat setting

	Control bar	Display
To set the heat	Touch the desired heat setting, if	to	/
setting	necessary, correct to the left or the
	right
To switch off	Touch 0

10 Operating the appliance

To switch the outside ring on and off

By switching the outside rings on or off, the effective heating surface can be matched to the size of the cookware.

3Before an outside ring can be switched on, the inside ring must be switched on.

Triple ring cooking	Sensor field		Pilot light
zone
To switch on the central	Touch	1-2 seconds	Second pilot light lights
ring			up
To switch on the outer	Touch	for 1-2 seconds	Third pilot light lights up
ring
To switch off the outer	Touch	for 1-2 seconds	Third pilot light goes out
ring
To switch off the central	Touch	for 1-2 seconds	Second pilot light goes
ring			out

Multi-purpose zone	Sensor field		Pilot light
To switch on the outer	Touch	1-2 seconds	Second pilot light lights
ring			up
To switch off the outer	Touch	for 1-2 sec-	Second pilot light goes
ring	onds		out

Locking/unlocking the control panel

The control panel, with the exception of the “On/Off” sensor field, can be locked at any time in order to prevent the settings being changed e.g. by wiping over the panel with a cloth.

	Control panel	Display
Switch on	Touch	(for 4 seconds)
Switch off	Touch	previously set heat setting

3When you switch the appliance off, the locking function is automatically switched off.

Operating the appliance
	11

Switching the STOP+GO function on and off

The STOP+GO function simultaneously switches all cooking zones that are switched on to the keep warm setting and then back to the heat setting that was previously set.

	Control panel	Display
To switch on	Touch
To switch off	Touch	heat setting that was previously
		set (not automatic warm up func-
		tion)

3Timer functions are not stopped by .

3 locks the whole control panel except the sensor field .

Using the automatic warm-up function

All cooking zones are equipped with an automatic warm-up function. When setting a heat setting using the automatic warm-up function, the cooking zone switches to full power for a certain amount of time and then automatically switches back to the heat setting set.

	Step	Control panel	Display
	1.	Touch

2.Move your finger down from to se- / ,

lect the desired heat setting between	after 5 seconds .
and	As long as		is displayed,
	the appliance works at full
	power.
	After the automatic warm
	up is completed, the heat
	setting	/	is dis-
	played again.

The length of time that the automatic warm up function operates depends on the heat setting selected.

12 Operating the appliance

Heat setting	Length of the automatic warm up
	[min:sec]
1	1:00
2	1:40
3	2:40
4	4:50
5	5:30
6	6:30
7	8:10
8	10:10
9	12:20
10	2:30
11	2:30
12	3:30
13	4:30
14	---

Operating the appliance
	13

Using the child safety device

The child safety device prevents unintentional use of the appliance.

Switching on the child safety device

	Step	Control panel	Display/Signal
	1.	Switch on appliance. (Do not set a
		heat setting.)

2. Touch for 4 seconds

The child safety device is switched on.

Overriding the child safety device

The child safety device can be switched off in this way for a single cooking session; it remains activated afterwards.

	Step		Control panel	Display/Signal
	1.	Switch appliance on
	2.	Touch	for 4 seconds	lights up

Until the appliance is next switched off, it can used as normal.

3After overriding the child safety device, a heat setting or a function must be set within approx. 10 seconds, otherwise the appliance automatically switches itself off.

Switching off the child safety device

	Step		Control panel	Display/Signal
	1.	Switch appliance on
	2.	Touch	for 4 seconds	lights up
	3.	Switch appliance off.

The child safety device is switched off.

14 Operating the appliance

Using the timer

Function	Condition	Outcome after the
		time has elapsed
Automatic cut-out	a heat setting is set	acoustic signal
		00 flashes
		Cooking zone switches
		off
Countdown timer	cooking zones not in use	acoustic signal
		00 flashes

3If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking zone is switched off after the time set has elapsed.

3If a cooking zone is switched off, the timer function set is also switched off.

Selecting a cooking zone

	Step	Control panel		Display
	1.	Touch	TIMER once	Pilot light of the first cook-
				ing zone flashes
	2.	Touch	TIMER once	Pilot light of the second
				cooking zone flashes
	3.	Touch	TIMER once	Pilot light of the third
				cooking zone flashes
	4.	Touch	TIMER once	Pilot light of the fourth
				cooking zone flashes

3If the pilot light is flashing more slowly, the heat setting can be set or modified.

3If other timer functions are set, after a few seconds the shortest remaining time of all the timer functions is displayed and the corresponding pilot light flashes.

Operating the appliance
	15

Setting the time

Step	Control panel	Indicator

1.Select TIMER cookPilot light for the cooking zone selected

	ing zone	flashes
2.
	Touch or	00 to 99 minutes

After a few seconds the pilot light flashes more slowly.

The time is set.

The time counts down.

Switching off the timer function

Step	Control panel	Indicator

1.Select TIMER cookPilot light of cooking zone selected flash-

	ing zone	es faster
		Time remaining is displayed
2.
	Touch	The time remaining counts backwards to
		00.

The pilot light goes out.

The Timer function for the selected cooking zone is switched off.

Changing the time

Step	Control panel	Indicator

1.TIMER Selecting a Pilot light of the selected cooking zone

	cooking zone	flashes more quickly
		Remaining time is displayed
2.
	Touch or	01 to 99 minutes

After a few seconds the pilot light flashes more slowly.

The time is set.

The time counts down.

16 Operating the appliance

Displaying the time remaining for a cooking zone

Step

Control panel field

Display

1.TIMER Select cookPilot light of the cooking zone selected

ing zone	flashes faster
	The time remaining is displayed

After a few seconds the pilot light flashes more slowly.

Switching off the acoustic signal

	Step	Control panel field		Acoustic signal
	1.	Touch	TIMER	Acoustic signal to acknowledge.
	Acoustic signal stops.

Operating the appliance
	17

Automatic switch off

Cooking surface

•If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off.

•If one or more sensor fields are covered by objects (a pan, cloths, etc.) for longer than approx. 10 seconds, a signal sounds and the cooking surface switches off automatically.

•If all cooking zones are switched off, the cooking surface automatically switches itself off after approx. 10 seconds.

Control panel

•When the appliance is switched off, if one or more of the sensor fields on the control panel are covered for more that 10 seconds, an acoustic signal sounds. The acoustic signal switches itself off automatically when the sensor fields are no longer covered.

Cooking zones

•If one of the cooking zones is not switched off after a certain time, or if the heat setting is not modified, the relevant cooking zone switches off automati-

cally. is displayed. Before being used again, the cooking zone must be set to

.

Heat setting		Switches off after
1 - 3		6 hours
4	- 6	5 hours
7	- 8	4 hours
9	-14	1.5 hours

18 Tips on cooking and frying

Tips on cooking and frying

3Information about acrylamides

According to the latest scientific research, intensive browning of food, especially in products containing starch, may present a health risk due to acrylamide. Therefore we recommend cooking at low temperatures and not browning foods too much.

Cookware

•You can recognise good cookware from the bottoms of the pans. The bottom should be as thick and flat as possible.

•Cookware made of enamelled steel or with aluminium or copper bottoms can leave discolourations on the ceramic glass surface which are difficult or impossible to remove.

Energy saving

2

2

Always place cookware on the cooking zone before it is switched on.

If possible, always place lids on the pans.

2Switch cooking zones off before the end of the cooking time, to take advantage of residual heat.

2Bottom of pans and cooking zones should be the same size.

Tips on cooking and frying 19

Examples of cooking applications

The information given in the following table is for guidance only.

	Heat	Cooking	suitable for	Cook time	Tips/Hints
	setting	process
	0		Residual heat setting, Off po-
			sition
	1	Keeping	Keeping cooked foods warm	as required	Cover
		food warm
		Melting	Hollandaise sauce,	5-25 mins.	Stir occasionally
	1-3		melting butter, chocolate,
			gelatine
		Solidifying	Fluffy omelettes, baked eggs	10-40 mins.	Cook with lid on
			Simmering rice and milk-		Add at least twice as
	3-5	Simmering	based dishes	25-50 mins.	much liquid as rice, stir
			Heating up ready-cooked		milk dishes part way
			meals		through cooking
		Steaming	Steaming vegetables, fish		With vegetables add only
	5-7			20-45 mins.	a little liquid (a few table-
		Braising	Braising meat
					spoons)
					Use only a little liquid, e.
			Steaming potatoes	20-60 mins.	g.: max. ¼ l water for
	7-9	Boiling			750 g of potatoes
			Cooking larger quantities of	60-150 mins.	Up to 3 l liquid plus in-
			food, stews and soups		gredients
		Gentle	Frying escalope, veal cordon		Turn halfway through
	9-12		bleu, cutlets, rissoles, sausag-	as required
		frying	es, liver, roux, eggs, pancakes,		cooking
			doughnuts
	12-13	Heavy	Hash browns, loin steaks,	5-15 mins.	Turn halfway through
			steaks, Flädle (pancakes for
		frying		per pan	cooking
			garnishing soup)
		Boiling
	14	Searing	Boiling large quantities of water, cooking pasta, searing meat (goulash,
		Deep fry-	pot roast), deep frying chips
		ing

20 Cleaning and care

Cleaning and care

1Take care! Risk of burns from residual heat.

1Important Sharp objects and abrasive cleaning materials will damage the appliance. Clean with water and washing up liquid.

1Important Residues from cleaning agents will damage the appliance. Remove residues with water and washing up liquid.

Cleaning the appliance after each use

1.Wipe the appliance with a damp cloth and a little washing up liquid.

2.Rub the appliance dry using a clean cloth.

Removing deposits

1.Place the scraper on the glass ceramic surface at an angle.

2.Remove residues by sliding the blade over the surface.

3.Wipe the appliance with a damp cloth and a little washing up liquid.

4.Rub the appliance dry using a clean cloth.

			Remove
		immedi-	when the appliance has
	Type of dirt			using
		ately	cooled down
	sugar, food containing sugar	yes	---	a scraper*
	plastics, tin foil	yes	---
	limescale and water rings	---	yes
	fat splashes	---	yes	cleaner for glass ceram-
				ic or stainless steel*
	shiny metallic discolouration	---	yes

*Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialist shops, supermarkets, the parts department of your local Service Force Centre or from www.shop.electrolux.co.uk

3Remove stubborn residues with a cleaner for glass ceramic or stainless steel.

3Scratches or dark stains on the glass ceramic that cannot be removed do not however affect the functioning of the appliance.

What to do if … 21

What to do if …

Problem	Possible cause	Remedy
The cooking zones will not	More than 10 seconds have	Switch the appliance on again.
switch on or are not function-	passed since the appliance was
ing	switched on
	The child safety device is	Deactivate the child safety de-
	switched on	vice (See the section “Child
		safety device”)
	Several sensor fields were	Only touch one sensor field
	touched at the same time
	Automatic switch off has been	Remove any objects (pan,
	triggered	cloths, etc.) that are lying on
		the control panel. Switch the
		appliance on again
	There is water on the control	Wipe the control panel
	panel or the control panel is
	covered with fat splashes
	STOP+GO is activated	Switching off STOP+GO
Acoustic signal sounds when	The control panel is wholly or	Remove objects.
appliance is switched off	partly covered by objects.
The residual heat indicator is	The cooking zone was only on	If the cooking zone is sup-
not displaying anything	for a short time and is there-	posed to be hot, call your local
	fore not hot	Service Force Centre.
Acoustic signal sounds and	The On/Off sensor field has	Do not place any objects on
appliance switches itself on	been covered up, e.g. by a	the control panel
and then off again; after 5	cloth
seconds another acoustic sig-
nal sounds
lights up	Automatic switch-off has	Switch appliance off. Switch
	been triggered	appliance on again
and number are displayed	Electronics fault	Disconnect the appliance from
		the electrical supply for a few
		minutes (Take the fuse out of
		the house’s wiring system)
		If after switching on again,
		is displayed again, call the cus-
		tomer service department

If you are unable to remedy the problem by following the above suggestions, please contact your local Service Force Centre.

1Warning! Repairs to the appliance are only to be carried out by qualified service engineers. Considerable danger to the user may result from improper repairs.

3If the appliance has been operated incorrectly, the visit from the service technician or dealer may not take place free of charge, even during the warranty period.

22 Disposal

Disposal

2Packaging material

The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at your local waste disposal facilities.

2Old appliance

The symbol W on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Installation Instructions
	23

Installation Instructions

1Safety instructions

Warning! This must be read!

The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.)

Installation may only be carried out by a qualified electrician.

The minimum distances to other appliances and units are to be observed. Anti-shock protection must be provided by the installation, for example drawers may only be installed with a protective floor directly underneath the appliance. The cut surfaces of the worktop are to be protected against moisture using a suitable sealant.

The sealant seals the appliance to the work top with no gap.

Avoid installing the appliance next to doors and under windows. Otherwise hot cookware may be knocked off the rings when doors and windows are opened.

zRisk of injury from electrical current.

•The electrical mains terminal is live.

•Make electrical mains terminal free of voltage.

•Follow connection schematic.

•Observe electrical safety rules.

•Ensure anti-shock protection by installing correctly.

•The appliance must be connected to the electrical supply by a qualified electrician.

zRisk of injury from electrical current.

•Loose and inappropriate plug and socket connections can make the terminal overheat.

•Have the clamping connections correctly installed by a qualified electrician.

•Use strain relief clamp on cable.

•In the event of single-phase or two-phase connection, the appropriate mains cable of type H05BB-F Tmax 90°C (or higher) must be used.

•If this appliance’s mains cable is damaged, it must be replaced by a special cable (type H05BB-F Tmax 90°C; or higher). Please contact your local Service Force Center for further advice.

A device must be provided in the electrical installation which allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm

Suitable isolation devices include line protecting cut-outs, fuses (screw type fuses are to be removed from the holder), earth leakage trips and contactors.

24 Installation Instructions

Electrical Connection Diagram

For UK only: 230V...240V~

Sticking on the seal

•Clean the worktop in the area of the cut-out section.

•Stick the one-sided self-adhesive sealing tape supplied all the way round the lower edge of the cooking surface along the outer edge of the glass ceramic panel. Do not stretch it. The cut ends should lie in the middle of one side.

When you have cut it to length (add a few mm), press the two ends flush up against one another.

Guarantee/Customer Service
	25

Guarantee/Customer Service

Great Britain

Standard guarantee conditions

We, AEG, undertake that if within 12 months of the date of the purchase this AEG appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our discretion repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that:

•The appliance has been correctly installed and used only on the electricity or gas supply stated on the rating plate.

•The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer's operating and maintenance instructions.

•The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any person not authorised by us.

•All service work under this guarantee must be undertaken by a Service Force Centre. Any appliance or defective part replaced shall become the Company's property.

•This guarantee is in addition to your statutory and other legal rights.

•Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these hours in which case a premium will be charged.

Exclusions

This guarantee does not cover:

•Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts of glass or plastic.

•Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom.

•Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements.

•Products of AEG manufacture which are not marketed by AEG.

Weitere Kundendienststellen im Ausland

In diesen Ländern gelten die Garantiebedingungen der örtlichen Partner. Diese können dort eingesehen werden.

Further after-sales service agencies overseas

In these countries our AEG-Electrolux agents’ own guarantee conditions are applicable. Please obtain further details direct.

Autres agences étrangères assurant le service après-vente

Dans ces pays, les conditions de garantie des concessionnaires de la région sont valables. Vous pouvez les consulter sur place.

Otros puntos de Postventa en el extranjero

En estos países rigen las condiciones de nuestros representantes locales. las cuales pueden ser consultadas allí mismo.

Ulteriori uffici del servizio tecnico assistenza clienti all’estero

In questi paesi sono valide le condizioni di garanzia dei partner locali. Queste condizioni possono essere esaminante sul luogo.

Serviços de assistência técnica no estrangeiro

Nestes países são válidas as condições de garantia dos concessionários locais, podendo aí ser consultadas.

26 Guarantee/Customer Service

További vevöszolgálati irodák külföldön

Ezekben az országokban a mi AEG-Electrolux vevöszolgálatainknál saját jótállási feltételek alkalmazhatók. A további adatokat kérjük közvetlenül szerezzék be.

Servisne službe

Na garancijskem listu boste našli seznam pooblašèenih servisnih služb AEG-Electrolux.

U.A.E. Abu Dhabi	Jordan	Malta
Universal Trading Company	Jordan Household	ITC
P.O. Box 43 99	Supply Co. Ltd.	International Trading Company
Tel.: [phone]	P.O. Box 3/68	White House Building
Service Center 6733974	Amman/Tel.: 69 70 50	Mountbatte Street
		Blata L-Bajda/Tel.: 220644

Egypt	Canada	Mauritius
Middle East Commercial	EURO-LINE Appliances	Happy World Centre Ltd.
Center	2150 Winston PARK Drive 20	P.O. 7 54
4 Salah El Dein St. - 2nd floor	Oakville, Ontario L6H 5V1	1 Chausee Street
Heliopolis, Kairo	Tel.: [phone]	Port Louis
Egypt	Fax: [phone]	Tel.: 25355
Tel.: [phone]

Australia	Korea (South)	Namibia
The Andi-Co Group	Core Incorp.	AEG NAMIBIA (PTY)
1 Stamford Road	3/F Chewoo Bldg.	LIMITED-Jeppe Street
Oakleigh VIC 3166	200 Nonhyun-Dong	Northern Industrial Area
Tel.: [phone]	Kangnam-Ku 135-010	Windhoek
Fax: [phone]	Seoul	Tel.: [phone]
www.andico.com.au	Telefon [phone]	Fax: [phone]

Bahrain/Arabian Gulf	Croatia	New Zealand
A.A. Zayani & Sons	Electrolux D.O.O.	Monaco Corporation Ltd.
P.O. Box 9 32	Suplova 7	10 Rothwell Avenue
Bahrain	10000 Zagreb	Albany - Auckland
Tel.: [phone]	Tel.: [phone]	4399 Auckland 1
	Fax: [phone]	New Zealand
		Tel.: [phone]
		Fax: [phone]

Bulgaria	Kuwait/Arabian Gulf	Syria
Electrolux Bulgaria E.O.O.D.	Ali Al-Ghanim Est.	WATTAR CO.
91 Levski Blvd.	P.O. Box 21540 - Safat	P.O. Box 36109
1000 Sofia	Tel.: [phone]	Mazzeh - Damascus
Tel.: [phone]	Fax: [phone]	Direct Phone: [phone]
Fax. [phone]		Fax: [phone]

Cyprus	Lebanon	Iran
Hadjikyrlakos & Sons Ltd.	Adib & Assaferi	ARIAN International Development
Prodromou 121	P.O. Box 539	Co.
P.O. Box 21587	Tripoli	AEG Showroom
Nicosia 1511		Shariati, Balatar as Safar
Service Telephones:		Teheran / Iran
Nicosia 02 481226		Phone No. Showroom:
Limassol 05 562182		021 / 285 513 / 4
Larnaca 04 633929		Phone No. Service:
Paphos 06 932 699		021 / 312 27 67 / 8

		Guarantee/Customer Service
				27
	Estonia	Latvia	Poland
	Electrolux Estonia Ltd.	Electrolux Latvija Ltd.	Electrolux Poland Sp. zo.o.
	Mustamäe tee 24	Kr.Barona iela 130/2	ul. Domaniewska 41
	EE0006 Tallinn	Riga, LV-1012	02-034 Warszawa
	Tel.: [phone]	Tel.: [phone]	tel.: [phone]
	Fax: [phone]	Fax: [phone]	fax: [phone]
	Hong Kong	Lithuania	Russia
	Dah Chong Hong Ltd.	Electrolux Lithuania	Electrolux Russia Ltd.
	20 Kai Cheung Road	Verkui 29	16 Olympiysky prospekt
	Kowloon Bay	2600 Vilnus	129090 Moscow
	Kowloon - Hong Kong	Tel.: [phone]	Tel.: [phone]
	Tel.: [phone]	Fax: [phone]	Fax: [phone]
	Fax: [phone]
	Israel	Malaysia	Saudi Arabia
	Evis Ltd.	Arzbergh Engineering	Awad Badi Nahas Est
	Tadiran-Ampa Service	No. 49A/B, Jalan Petaling	Shara Siteen
	10 Gibonay Israel Street	Utama 7	Jeddah 21463
	New Industrial Zone	4600 Petaling Jaya	Phone: [phone]
	Netanya, 42504	Tel.: [phone]	Alia Trading Co
	Israel	Fax: [phone]	Mecca Road
			Riyadh 11491
			Phone [phone]
	Japan	Singapore	Slovenia
	Electrolux Japan Ltd.	Group Pte Ltd.	Electrolux Slovenia D.O.O.
	Domestic Appliances	833 Bukit Timah Road	Traska Ul. 132
	Department	Unit no. 01-11 Royalville	1000 Ljubljana
	Maruzen Showa Warehouse	279887 Singapore	Tel.: [phone]
	Building	Tel.: [phone]	Fax: [phone]
	Tookai 4-5-12, Ota-ku	Fax: [phone]
	143-006 Tokyo
	Tel.: [phone]
	Fax: [phone]
	Thailand	Slovakia Rep.	South Africa
	Olympia Thai Tower, 444	Electrolux Slovakia S.R.O.	AEG (Pty) Ltd.
	Rachadapiser Road	Seberiniho 1	55, 12th Road
	SamsennokHuaykwang	821 03 Bratislava	P.O. Box 1 02 64
	10320 Bangkok	Tel.: [phone], 4355	Kew/Johannesburg 2000
	Thailand	Fax: [phone]	Tel.: [phone]
	Tel.: [phone]
	Fax: [phone]
	Hungary	Czech Rep.
	Electrolux Lehel KFT	ELECTROLUX DOMÁCå
	Erzsébet Királyné útja 87.	SPOTØEBIÈE CZ
	1142 Budapest
		DIVIZE ELECTROLUX S.R.O.
	Tel.: [phone]
		Customer Centre
		Hanusova ul.
		140 21 Praha 4
		Tel.: [phone]
		Telefax: 2 6112 3504

28 Guarantee/Customer Service

European Guarantee

This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the appliance guarantee or otherwise by law. If you move from one of these countries to another of the countries listed below the appliance guarantee will move with you subject to the following qualifications:

•The appliance guarantee starts from the date you first purchased the appliance which will be evidenced by production of a valid purchase document issued by the seller of the appliance.

•The appliance guarantee is for the same period and to the same extent for labour and parts as exists in your new country of residence for this particular model or range of appliances.

•The appliance guarantee is personal to the original purchaser of the appliance and cannot be transferred to another user.

•The appliance is installed and used in accordance with instructions issued by Electrolux and is only used within the home, i.e. is not used for commercial purposes.

•The appliance is installed in accordance with all relevant regulations in force within your new country of residence.

The provisions of this European Guarantee do not affect any of the rights granted to you by law.

Service and Spare Parts 29

Service and Spare Parts

If the event of your appliance requiring service, or if you wish to purchase spare parts, please contact Service Force by telephoning:

0870 5 929 929

Your telephone call will be automatically routed to the Service Force Centre covering your post code area.

For the address of your local Service Force Centre and further information about Service Force, please visit the website at

www. serviceforce.co.uk

Before calling out an engineer, please ensure you have read the details under the heading „What to do if...“

When you contact the Service Force Centre you will need to give the following details:

1.Your name, address and post code.

2.Your telephone number.

3.Clear and concise details of the fault.

4.	The model and serial number of the appliance (found on the rating plate)
5.	The purchase date.

Please note that a valid purchase receipt or guarantee documentation is required for inguarantee service calls.

Customer Care

For general enquiries concerning your AEG appliance, or for further information on AEG products please contact our Customer Care Department by letter or telephone at the address below or visit our website at www.aeg.co.uk.

Customer Care Department	For Customer Service in the Republic of
Major Appliances	Ireland please contact us at the address be-
AEG Domestic Appliances	low:
Addington Way	AEG/ Electrolux Group (Ire) Ltd
Luton	Long Mile Road/ Dublin 12
Bedfordshire, LU4 9QQ	Republic of Ireland
Tel: [phone] (*)	Tel: [phone]
	Email: [e-mail]

(*) Calls may be recorded for training purposes