68002K-MN
User Manual |
Ceramic glass |
Notice d’utilisation |
induction hob |
Gebruiksaanwijzing |
Table de cuisson |
|
vetrocéramique à |
|
induction |
|
Glaskeramische |
|
inductie-kookplaat |
2
Dear Customer
Thank you for choosing one of our high-quality products.
With this appliance you will experience the perfect combination of functional design and cutting edge technology.
Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence.
In addition to this you find environmental and energy saving aspects as an integral part of our products.
To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently.
To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance.
We wish you much joy with your new appliance.
The following symbols are used in this user information:
1Warning! This must be read! Important advice for the safety of persons and information on avoiding damage to the appliance
3General information and advice
2Information on environmental protection
zDangerous voltage
3
Contents
Operating Instructions |
4 |
|
|
Safety instructions |
4 |
|
|
Description of the Appliance |
6 |
|
|
Cooking surface layout |
6 |
Control panel layout |
6 |
Touch Control sensor fields |
7 |
Displays |
7 |
Residual heat indicator |
7 |
Operating the appliance |
9 |
|
|
Switching the appliance on and off |
9 |
Setting the heat setting |
9 |
Locking/unlocking the control panel |
9 |
Using the child safety device |
10 |
Switching the power function on and off |
11 |
Using the timer |
12 |
Automatic switch off |
15 |
Tips on Cooking and Frying |
16 |
|
|
Cookware for induction cooking zones |
17 |
Tips on energy saving |
18 |
Examples of cooking applications |
19 |
Cleaning and Care |
20 |
|
|
What to do if … |
21 |
Disposal |
23 |
|
|
Installation Instructions |
24 |
|
|
Safety instructions |
24 |
Guarantee/Customer Service |
26 |
|
|
Service |
27 |
|
|
Assembly |
86 |
|
|
Rating Plate |
90 |
|
|
4 Operating Instructions
Operating Instructions
1 Safety instructions
Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty.
Correct use
•This appliance is not intended for use by children or other persons whose physical, sensory or mental capabilities or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction by a responsible person to ensure that they can use the appliance safely.
•Do not leave the appliance unattended during operation.
•This appliance should be used only for normal domestic cooking and frying of food.
•The appliance must not be used as a work surface or as a storage surface.
•Additions or modifications to the appliance are not permitted.
•Do not place or store flammable liquids, highly inflammable materials or fusible objects (e.g. plastic film, plastic, aluminium) on or near the appliance.
Children’s safety
•Small children must be kept away from the appliance.
•Only let bigger children work on the appliance under supervision.
•To avoid small children and pets unintentionally switching the appliance on, we recommend activation of the child safety device.
General safety
•The appliance may only be installed and connected by trained, registered service engineers.
•Built-in appliances may only be used after they have built in to suitable builtin units and work surfaces that meet standards.
•In the event of faults with the appliance or damage to the glass ceramic (cracks, scratches or splits), the appliance must be switched off and disconnected from the electrical supply, to prevent the possibility of an electric shock.
•Repairs to the appliance must only be carried out by trained registered service engineers.
Safety instructions |
|
5 |
|
|
|
Safety during use
•Remove stickers and film from the glass ceramic.
•There is the risk of burns from the appliance if used carelessly.
•Cables from electrical appliances must not touch the hot surface of the appliance or hot cookware.
•Overheated fats and oils can ignite very quickly. Warning! Fire hazard!
•Switch the cooking zones off after each use.
•Users with implanted pacemakers should keep their upper body at least 30 cm from induction cooking zones that are switched on.
•Risk of burns! Do not place objects made of metal, such as knives, forks, spoons and saucepan lids on the cooking surface, as they can get hot.
Safety when cleaning
•For cleaning, the appliance must be switched off and cooled down.
•For safety reasons, the cleaning of the appliance with steam jet or high-pres- sure cleaning equipment is not permitted.
How to avoid damage to the appliance
•The glass ceramic can be damaged by objects falling onto it.
•The edge of the glass ceramic can be damaged by being knocked by the cookware.
•Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the glass ceramic if pushed across the surface.
•Objects that melt and things that boil over can burn onto the glass ceramic and should be removed straightaway.
•Do not use the cooking zones with empty cookware or without cookware.
•To avoid damaging cookware and glass ceramics, do not allow saucepans or frying pans to boil dry.
•The ventilation gap of 5mm between the worktop and front of the unit underneath it must not be covered.
6 Description of the Appliance
Description of the Appliance
Cooking surface layout
Induction cooking zone 1400 W |
|
Induction cooking zone 1800 W |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Induction cooking zone 2200 W |
Control panel |
Induction cooking zone 1800 W |
with power function 3100 W |
|
with power function 2800 W |
Control panel layout
Display |
Cooking zone indicators |
|
Timer function |
||
|
||
Heat setting selection |
Timer display |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
On/Off |
Timer |
|
Power function |
|||
with power indicator |
|
|
|
|
|
|
|
|
|
|
Lock |
Description of the Appliance |
|
7 |
|
|
|
Touch Control sensor fields
The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals. Touch the sensor fields from above, without covering other sensor fields.
|
|
Sensor field |
Function |
|
|
On / Off |
To switch the appliance on and off |
|
|
Increase settings |
Increasing heat setting/time |
|
|
Decrease settings |
Decreasing heat setting/time |
|
|
Timer |
Timer selection |
|
|
||
|
|
||
|
|
Lock |
Locking/unlocking the control panel |
|
|
Power |
Switching the power function on and |
|
|
|
off |
|
|
|
|
8 Description of the Appliance
Displays
|
Display |
Description |
|
|
|
|
|
Cooking zone is switched off |
- |
Heat settings |
Heat setting is set |
|
Fault |
Malfunction has occurred |
|
Pan detection |
Cookware is unsuitable or too small or |
|
|
no cookware has been placed on the |
|
|
cooking zone |
|
Residual heat |
Cooking zone is still hot |
|
Child safety device |
Lock/child safety device is engaged |
|
Power |
Power function is switched on |
|
Automatic switch off |
Switch off is active. |
|
|
|
Residual heat indicator
1Warning! Risk of burns from residual heat. After being switched off, the cooking zones need some time to cool down. Look at the residual heat indicator .
3Residual heat can be used for melting and keeping food warm.
The induction cooking zones create the heat required for cooking directly in the base of the cookware. The glass ceramic is merely heated by the residual heat of the cookware.
The cooling fan switches itself on and off depending upon the temperature of the electronics.
Operating the appliance |
|
9 |
|
|
|
Operating the appliance
3Use the induction cooking zones with suitable cookware.
Switching the appliance on and off
|
Control panel |
Display |
Pilot light |
|
Switch on |
Touch |
for 2 seconds |
/ |
lights up |
Switch off |
Touch |
for 1 second |
/ none |
goes out |
|
|
|
|
|
3After switching on, within approx. 10 seconds a heat setting or a function must be set, otherwise the appliance automatically switches itself off.
Setting the heat setting
|
Control panel |
|
Display |
|
|
Increase |
Touch |
|
|
to |
/ |
Decrease |
Touch |
|
|
to |
|
Switch off |
Touch |
and |
at the same time |
|
|
|
|
|
|
|
|
Locking/unlocking the control panel
The control panel, with the exception of the “On/Off” sensor field, can be locked at any time in order to prevent the settings being changed e.g. by wiping over the panel with a cloth.
|
Control panel |
Display |
Switch on |
Touch |
(for 5 seconds) |
Switch off |
Touch |
previously set heat setting |
|
|
|
3When you switch the appliance off, the locking function is automatically switched off.
10 Operating the appliance
Using the child safety device
The child safety device prevents unintentional use of the appliance.
Setting the child safety device
|
Step |
|
Control panel |
Display/Signal |
|
1. |
Switch on the appliance |
|
|
|
|
(Do not set a heat setting) |
|
|
|
2. |
Touch |
until the signal sounds |
Acoustic signal |
|
3. |
Touch |
|
|
|
|
|
|
|
Appliance switches off. The child safety device is engaged.
Overriding the child safety device
The child safety device can be released in this way for a single cooking session; it remains activated afterwards.
|
Step |
|
Control panel |
Display/Signal |
|
|
1. |
Switch on the appliance |
|
||
|
2. |
Touch |
and |
at the same time |
/ acoustic signal |
|
|
|
|
|
|
Until the appliance is next switched off, it can used as normal.
Releasing the child safety device
|
Step |
|
Control panel |
Display/Signal |
|
1. |
Switch on the appliance |
|
|
|
|
|
|
|
2. |
Touch |
until the signal sounds |
Acoustic signal |
3.Touch
Appliance switches off. The child safety device is released.
Operating the appliance |
|
11 |
|
|
|
Switching the power function on and off
The power function makes additional power available to the front induction cooking zones, e.g. to bring a large volume of water to the boil.
The power function is activated for 8 minutes for the front left cooking zone and for 5 minutes for the front right cooking zone. After these times, the induction cooking zones automatically return to cooking level .
|
Control panel |
Display |
Switch on |
Touch |
|
Switch off |
Touch |
|
|
Touch |
|
|
|
|
3If the power function has ended, the cooking zones automatically switch back to the heat setting set previously.
Power Management
The cooking zones of the cooking surface have a maximum power available to them.
Two cooking zones make up a pair (see figure).
So that the Power function can always be
carried out, Power Management may reduce the power of the other cooking zone
in the pair
Example: heat setting 9 is selected on a cooking zone. The Power function is switched on for the cooking zone paired up with it. The Power function is performed,
but heat setting 9 on one cooking zone and Power function on the other cooking zone of a pair exceeds the maximum output for both. Therefore Power Management reduces the first cooking zone that was switched on from 9 to 7, for example, and the display for this cooking zone alternates between 9 and 7 and then remains on the current maximum of 7. (Whether the display alternates between 9 and 7 or 9 and 6 or other values, depends on the appliance type and the size of the cooking zone.)
12 Operating the appliance
Using the timer
All cooking zones can use each use one of the two timer functions at the same time.
Function |
Condition |
Outcome after the |
|
|
time has elapsed |
|
|
|
Automatic cut-out |
a heat setting is set |
acoustic signal |
|
|
00 flashes |
|
|
Cooking zone switches |
|
|
off |
Countdown timer |
cooking zones not in use |
acoustic signal |
|
|
00 flashes |
|
|
|
3If a cooking zone is switched off, the timer function set is also switched off.
3If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking zone is switched off after the time set has elapsed.
Selecting a cooking zone
|
Step |
Control panel |
Display |
||||
|
1. |
Touch |
|
once |
Pilot light of the first cook- |
|
|
|
|
|
|||||
|
|
||||||
|
|
|
|
|
ing zone flashes |
|
|
|
2. |
Touch |
|
once |
Pilot light of the second |
|
|
|
|
|
|
||||
|
|
|
|||||
|
|
||||||
|
|
|
|
|
cooking zone flashes |
|
|
|
3. |
Touch |
|
once |
Pilot light of the third |
|
|
|
|
|
|
||||
|
|
|
|||||
|
|
||||||
|
|
|
|
|
cooking zone flashes |
|
|
|
4. |
Touch |
|
once |
Pilot light of the fourth |
|
|
|
|
|
|
||||
|
|
|
|||||
|
|
||||||
|
|
|
|
|
cooking zone flashes |
|
|
|
|
|
|
|
|
|
|
3The heat setting indicator of the selected cooking zone goes out, as long as the timer time can be set.
3If the pilot light is flashing more slowly, the heat setting indicator appears again and the heat setting can be re-set or modified.
3If other timer functions are set, after a few seconds the shortest remaining time of all the timer functions is displayed and the corresponding pilot light flashes.
Operating the appliance |
|
13 |
|
|
|
Setting time
|
Step |
Control panel |
|
Grill setting |
||
|
1. |
|
Selecting cooking |
Telltale of cooking zone selected flashes |
||
|
|
|||||
|
|
|||||
|
|
zone |
|
|
|
|
|
2. |
Touch |
or |
from |
01 to 99 minutes |
|
|
|
the selected cooking |
|
|||
|
|
zone |
|
|
|
|
|
3. |
Touch |
or |
from |
... 05...10...15... 20 or... 95... 90... 85... |
|
|
|
the selected cooking |
80... (5-minute steps for easy setting) |
|||
|
|
zone for more than 4 |
|
|||
|
|
seconds |
|
|
|
|
|
|
|
|
|
|
|
After a few seconds the power indicator flashes more slowly. The time is set.
The time counts down.
Switching off the Timer function
|
Step |
Control panel |
Display |
|
|
1. |
|
Select a cooking |
Pilot light of the selected cooking zone |
|
|
|||
|
|
|||
|
|
zone |
flashes more quickly. |
|
|
|
|
|
Remaining time is displayed |
2.Touch for the cookThe remaining time counts down to 00. ing zone selected
The pilot light goes out.
The Timer function for the selected cooking zone is switched off.
Changing the time
|
Step |
Control panel field |
Display |
|||
|
1. |
|
|
Select cooking |
Pilot light of the cooking zone selected |
|
|
|
|
||||
|
|
|
||||
|
|
zone |
|
|
flashes faster |
|
|
|
|
|
|
|
The time remaining is displayed |
|
2. |
Touch |
or |
for the |
01 to 99 minutes |
|
|
|
cooking zone selected |
|
|||
|
After a few seconds the pilot light flashes more slowly. |
|||||
|
The time is set. |
|
|
|
||
|
The time counts down. |
|
|
|||
|
|
|
|
|
|
|
14 Operating the appliance
Displaying the time remaining for a cooking zone
|
Step |
Control panel field |
Display |
|
|
|
|
|
|
1. |
|
Select cooking |
Pilot light of the cooking zone selected |
|
|
|
|||
|
|
|||
|
|
zone |
flashes faster |
|
|
|
|
|
The time remaining is displayed |
After a few seconds the pilot light flashes more slowly.
Switching off the acoustic signal
|
Step |
Control panel field |
Acoustic signal |
||
|
1. |
Touch |
|
|
Acoustic signal to acknowledge. |
|
|
||||
|
|
||||
|
Acoustic signal stops. |
|
|||
|
|
|
|
|
|
Operating the appliance |
|
15 |
|
|
|
Automatic switch off
Cooking surface
•If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off.
•If all cooking zones are switched off, the cooking surface automatically switches itself off after approx. 10 seconds.
Induction cooking zones
•If cookware that is not suitable is used, lights up in the display and after 2 minutes the indicator for the cooking zone switches itself off.
•If one of the cooking zones is not switched off after a certain time, or if the heat setting is not modified, the relevant cooking zone switches off automatically. is displayed. Before being used again, the cooking zone must be set to
0.
Heat setting |
Switches off after |
1 - 2 |
6 hours |
3 - 4 |
5 hours |
5 |
4 hours |
6 - 9 |
1.5 hours |
|
|
16 Tips on Cooking and Frying
Tips on Cooking and Frying
3Information on acrylamides
According to the latest scientific knowledge, intensive browning of food, especially in products containing starch, can constitute a health risk due to acrylamides. Therefore we recommend cooking at the lowest possible temperatures and not browning foods too much.
Tips on Cooking and Frying 17
Cookware for induction cooking zones
Cookware material
Cookware material |
Suitable |
|
|
Steel, enamelled steel |
yes |
Cast iron |
yes |
Stainless steel |
if appropriately labelled by the manufacturer |
Aluminium, copper, brass |
--- |
Glass, ceramic, porcelain |
--- |
|
|
3Cookware for induction cooking zones is labelled as suitable by the manufacturer.
Suitability test
Cookware is suitable for induction cooking, if …
•... a little water on an induction cooking zone set to heat setting 9 is heated within a short time.
•... a magnet sticks to the bottom of the cookware.
3Certain cookware can make noises when being used on induction cooking zones. These noises are not a fault in the appliance and do not affect operation in any way.
Bottom of the cookware
The bottom of the cookware should be as thick and flat as possible.
Pan size
Induction cooking zones adapt automatically to the size of the bottom of the cookware up to a certain limit. However the magnetic part of the bottom of the cookware must have a minimum diameter depending upon the size of the cooking zone.
Diameter of cooking zone |
Minimum diameter of dish base |
[mm] |
[mm] |
210 |
180 |
180 |
145 |
145 |
120 |
|
|
3The cookware must be placed centrally on the cooking zone.
18 Tips on Cooking and Frying
Tips on energy saving
2Place cookware on the cooking zone before it is switched on.
2If possible, always place a lid on the cookware.
Tips on Cooking and Frying 19
Examples of cooking applications
The information given in the following table is for guidance only.
Heat |
Cooking- |
suitable for |
Cooking |
Tips/Hints |
|
setting |
process |
time |
|||
|
|
||||
|
|
|
|
|
|
0 |
|
Off position |
|
|
|
1 |
Keeping |
Keeping cooked foods warm |
as required |
Cover |
|
food warm |
|||||
|
Melting |
Hollandaise sauce, |
|
|
|
1-2 |
melting butter, chocolate, |
5-25 mins. |
Stir occasionally |
||
|
gelatine |
|
|
||
|
|
|
|
||
|
Solidifying |
Fluffy omelettes, baked eggs |
10-40 mins. |
Cook with lid on |
|
|
Simmer- |
Simmering rice and milk- |
|
Add at least twice as |
|
|
based dishes |
|
much liquid as rice, stir |
||
2-3 |
ing on low |
25-50 mins. |
|||
Heating up ready-cooked |
milk dishes part way |
||||
|
heat |
|
|||
|
meals |
|
through cooking |
||
|
|
|
|||
3-4 |
Steaming |
Steaming vegetables, fish |
20-45 mins. |
With vegetables add only |
|
a little liquid (a few table- |
|||||
Braising |
braising meat |
||||
|
|
spoons) |
|||
|
|
|
|
||
|
|
|
|
Use only a little liquid, e. |
|
|
|
Steaming potatoes |
20-60 mins. |
g.: max. ¼ l water for |
|
4-5 |
Boiling |
|
|
750 g potatoes |
|
|
|
Cooking larger quantities of |
60-150 mins. |
Up to 3 l liquid plus in- |
|
|
|
food, stews and soups |
gredients |
||
|
|
|
|||
|
Gentle |
Frying escalopes, veal cor- |
|
Turn halfway through |
|
6-7 |
don bleu, cutlets, rissoles, |
Steady frying |
|||
Frying |
sausages, liver, roux, eggs, |
cooking |
|||
|
|
||||
|
|
pancakes, doughnuts |
|
|
|
|
Heavy |
Hash browns, loin steaks, |
5-15 mins. |
Turn halfway through |
|
7-8 |
steaks, Flädle (pancakes for |
||||
Frying |
per pan |
cooking |
|||
|
garnishing soup) |
||||
|
|
|
|
||
|
Boiling |
|
|
|
|
9 |
Searing |
Boiling large quantities of water, cooking pasta, searing meat (goulash, |
|||
Deep |
pot roast), deep frying chips |
||||
|
|||||
|
frying |
|
|
|
|
|
|
|
|
|
The power function is suitable for heating large quantities of liquid.
20 Cleaning and Care
Cleaning and Care
1Take care! Risk of burns from residual heat.
1Warning! Sharp objects and abrasive cleaning materials will damage the appliance. Clean with water and washing up liquid.
1Warning! Residues from cleaning agents will damage the appliance. Remove residues with water and washing up liquid.
Cleaning the appliance after each use
1.Wipe the appliance with a damp cloth and a little washing up liquid.
2.Rub the appliance dry using a clean cloth.
Removing deposits
1.Place a scraper on the glass ceramic surface at an angle.
2.Remove residues by sliding the blade over the surface.
3.Wipe the appliance with a damp cloth and a little washing up liquid.
4.Rub the appliance dry using a clean cloth.
|
|
Remove |
|
|
|
immedi- |
when the appliance has |
|
|
Type of dirt |
using |
|||
ately |
cooled down |
|||
|
|
|||
|
|
|
|
|
sugar, food containing sugar |
yes |
--- |
a scraper* |
|
plastics, tin foil |
yes |
--- |
||
|
||||
limescale and water rings |
--- |
yes |
|
|
fat splashes |
--- |
yes |
cleaner for glass ceram- |
|
ic or stainless steel* |
||||
|
|
|
||
shiny metallic discolouration |
--- |
yes |
|
|
|
|
|
|
*Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialist shops
3Remove stubborn residues with a cleaner for glass ceramic or stainless steel.
3Scratches or dark stains on the glass ceramic that cannot be removed do not however affect the functioning of the appliance.
What to do if … 21
What to do if …
Problem |
Possible cause |
Remedy |
|
|
|
The appliance cannot be |
More than 10 seconds have |
Switch the appliance on again. |
switched on or is not operat- |
passed since the appliance was |
|
ing |
switched on |
|
|
The lock is switched on |
Switch off the lock (See the |
|
|
section “Locking/unlocking the |
|
|
control panel”) |
|
The child safety device is |
Deactivate child safety device |
|
switched on |
(See the section “Child safety |
|
|
device”) |
|
Several sensor fields were |
Only touch one sensor field |
|
touched at the same time |
|
|
Automatic switch off has been |
Remove any objects (pan, |
|
triggered |
cloths, etc.) that are lying on |
|
|
the control panel. Switch the |
|
|
appliance on again |
The cooking zones automati- |
The sensor fields are partly |
Remove the cloth or the liquid. |
cally reduce the cooking level |
covered by a damp cloth or |
Reset the cooking level re- |
to |
with liquid |
quired. |
The residual heat indicator is |
The cooking zone was only on |
If the cooking zone is sup- |
not displaying anything |
for a short time and is there- |
posed to be hot, call the Cus- |
|
fore not hot |
tomer Service Department. |
acoustic signal sounds, appli- |
One or more sensor fields have |
Uncover sensor field |
ance switches off |
been covered for longer than |
|
|
10 seconds |
|
Acoustic signal sounds and |
The On/Off sensor field has |
Do not place any objects on |
appliance switches itself on |
been covered up, e.g. by a |
the control panel |
and after 10 seconds off again |
cloth |
|
Display is switching between |
Power management is reduc- |
See the section “Switching the |
two heat settings |
ing the power of this cooking |
power function on and off” |
|
zone |
|
lights up |
Unsuitable cookware |
Use suitable cookware |
|
No cookware on the cooking |
Place cookware on the cooking |
|
zone |
zone |
|
The diameter of the bottom of |
Move onto a smaller cooking |
|
the cookware is too small for |
zone |
|
the cooking zone |
Use suitable cookware |
|
|
|
|
|
|
22 What to do if …
Problem |
Possible cause |
Remedy |
|
|
|
is lit |
Overheating protection for the |
Switch off the cooking zone. |
|
cooking zone has been trig- |
Switch the cooking zone on |
|
gered |
again |
|
Automatic switch off has been |
Switch off the cooking zone. |
|
triggered |
Switch the cooking zone on |
|
|
again |
and number are displayed |
Electronics fault |
Disconnect the appliance from |
|
|
the electrical supply for a few |
|
|
minutes (Take the fuse out of |
|
|
the house’s wiring system) |
|
|
If after switching on again, |
|
|
is displayed again, call the cus- |
|
|
tomer service department |
|
|
|
If you are unable to remedy the problem by following the above suggestions, please contact your dealer or the Customer Care Department.
1Warning! Repairs to the appliance are only to be carried out by qualified service engineers. Considerable danger to the user may result from improper repairs.
3If the appliance has been wrongly operated, the visit from the customer service technician or dealer may not take place free of charge, even during the warranty period.
Disposal 23
Disposal
2Packaging material
The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities.
2Old appliance
The symbol W on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
24 Installation Instructions
Installation Instructions
1Safety instructions
Warning! This must be read!
The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.)
Installation may only be carried out by a qualified electrician.
The minimum distances to other appliances and units are to be observed. Anti-shock protection must be provided by the installation, for example drawers may only be installed with a protective floor directly underneath the appliance. The cut surfaces of the worktop are to be protected against moisture using a suitable sealant.
The sealant seals the appliance to the work top with no gap.
Do not use silicon sealant between the appliance and the work top.
When building in, protect the underside of the appliance from steam and moisture, e.g. from a dishwasher or oven.
Avoid installing the appliance next to doors and under windows. Otherwise hot cookware may be knocked off the rings when doors and windows are opened.
zRisk of injury from electrical current.
•The electrical mains terminal is live.
•Make electrical mains terminal free of voltage.
•Follow connection schematic.
•Observe electrical safety rules.
•Ensure anti-shock protection by installing correctly.
•The appliance must be connected to the electrical supply by a qualified electrician.
Installation Instructions |
|
25 |
|
|
|
zRisk of injury from electrical current.
•Loose and inappropriate plug and socket connections can make the terminal overheat.
•Have the clamping connections correctly installed by a qualified electrician.
•Use strain relief clamp on cable.
•In the event of single-phase or two-phase connection, the appropriate mains cable of type H05BB-F Tmax 90°C(or higher) must be used.
•If this appliance’s mains cable is damaged, it must be replaced by a special cable (type H05BB-F Tmax 90°C; or higher). The latter is available from the Customer Care Department.
A device must be provided in the electrical installation which allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm.
Suitable isolation devices include line protecting cut-outs, fuses (screw type fuses are to be removed from the holder), earth leakage trips and contactors.
26 Guarantee/Customer Service
Guarantee/Customer Service
European Guarantee
This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the appliance guarantee or otherwise by law. If you move from one of these countries to another of the countries listed below the appliance guarantee will move with you subject to the following qualifications:
•The appliance guarantee starts from the date you first purchased the appliance which will be evidenced by production of a valid purchase document issued by the seller of the appliance.
•The appliance guarantee is for the same period and to the same extent for labour and parts as exists in your new country of residence for this particular model or range of appliances.
•The appliance guarantee is personal to the original purchaser of the appliance and cannot be transferred to another user.
•The appliance is installed and used in accordance with instructions issued by Electrolux and is only used within the home, i.e. is not used for commercial purposes.
•The appliance is installed in accordance with all relevant regulations in force within your new country of residence.
The provisions of this European Guarantee do not affect any of the rights granted to you by law.
Service 27
Service
In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”).
If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners.
In order to be able to assist you quickly, we require the following information:
– Model description
–Product number (PNC)
–Serial number (S No.)
(for numbers see rating plate)
–Type of fault
–Any error messages displayed by the appliance
–three digit letter-number combination for glass ceramic
So that you have the necessary reference numbers from your appliance at hand, we recommend that you write them in here:
...
Model description: .............................................
PNC: .............................................
S No: .............................................
28
Chère cliente, cher client
Nous vous remercions d'avoir choisi un de nos produits.
Tout au long de son utilisation, vous ferez l'expérience d'une combinaison parfaite entre design fonctionnel et technologie d'avant-garde.
Sa fabrication est basée sur les standards les plus élevés de l'excellence. Votre appareil a été ainsi conçu pour vous fournir les meilleures performances tout en respectant les aspects environnementaux et d'économie d'énergie.
Nous vous conseillons de lire attentivement cette notice d'utilisation et de la conserver à proximité pour une utilisation optimale.
Pensez également à la transmettre au prochain utilisateur.
Nous vous souhaitons beaucoup de plaisir avec votre appareil A.E.G. Electrolux.
Les symboles suivants sont utilisés dans ce guide d'utilisateur :
1Attention ! A lire impérativement ! Remarques importantes relatives à la sécurité des personnes et informations destinées à prévenir les dommages causés à l'appareil
3Remarques générales et recommandations
2Remarques relatives à la protection de l'environnement
zRisque dû à l'alimentation électrique