AEG-Electrolux 6050K-WN, 6050K-MN, 6051K-MN, 6051K-DN, 6051K-BN User Manual

...
0 (0)

6000 K, 6010 K, 6040 K,

6050 K, 6051 K

Glaskeramik-Einbau-Kochmulden

Fitted Glass Ceramic Cooking Units

Tables de cuisson vitrocéramiques à encastrer

Piani di cottura componibili in vetroceramica

Glaskeramiek-inbouwkookplaten Inbyggda glaskeramik-kokhällar

Kalusteisiin sijoitettavat keraamiset keittotasot

Einbauund Gebrauchsanweisung

Installation Directives and Instructions for Use

Notice de montage et d’utilisation Istruzioni per il montaggio e per l’uso Inbouwen gebruiksaanwijzing Monteringsoch bruksanvisning Asenusja käyttöohje

Table of Contents

GB

Fitting Instructions

17

Illustrations

17/18

Before Fitting

19

Fitting

19

Connection

19/20

Safety Instructions

21

For the Fitter

21

For the User

21

Description of Equipment

22

6000 K, 6010 K, 6040 K,

22

6050 K, 6051 K

23

Glass Ceramics

24

Attributes

24

How to Operate

25

The Switch

25

Table of Settings

25

Residual-Heat Display

25

Dual-Circuit Connection

26

The right Pots and Pans

26

General Remarks

26

Cleaning and Care of Glass Ceramics Surfaces

27

Basic Principles

27

Food that has Spilled Over

27

Burned-in Sugar

27

Melted Plastic

27

Spots and Stains

28

Grains of Sand

28

Worn Décor

28

What to do when ...

29

Faults you can Remedy Yourself

29

After Sales Service

29

16

AEG-Electrolux 6050K-WN, 6050K-MN, 6051K-MN, 6051K-DN, 6051K-BN User Manual

Fitting Instructions

R 2

17

Fitting Instructions

R 3

1 = Work Top

2 = Insulation

3 = Placement Area

4 = Tensioning Element

18

Before Fitting

These fitted cooking units are intended for placement in the cutout of a table top (Illustration 3).

The unit must be connected by an authorized electrician, since this ensures that both the statutory regulations and the connection conditions of the local electricity supply company are observed.

Make cutout of 560 mm x 490 mm in the work top with a margin of 55 mm both in front and behind.

The cooking-unit cupboard must have a protective floor that is at least 30 mm from the underside of the unit and can only be removed with the use of tools.

Extractor hoods above the unit must be fitted in accordance with the extractor-hood fitting instructions.

Unit furniture must be treated with a plastic coating or veneer with heat-resistant adhesive (100 C), as it can otherwise deform or loosen, especially at thinner points.

Fitting

The use of massive wooden wall-side skirting boards on the table top behind the fitted unit is permissible provided the minimum clearances have been observed.

Alterations of surface colour can be traced to influence of light.

The fitted cooking unit must be installed such that the control switches are positioned to the right (Illustration 1).

Connection

In cases of electrical connection of the unit, plans must be made for the use of a facility that enables contact separation from the mains supply of at least 3 mm for all pins.

Suitable separators are LS switches, fuses and protective devices.

The mains connection cable must be of type H05VV-F or H05VVH2-F at least.

Mains

Cable

Supply Voltage

230...240 V~

3 x 4²

230...240 V

400 V 2 N~

4 x 2.5²

230 V

19

Loading...
+ 10 hidden pages