ADTRAN 4200659L2 User Manual
Size:
1.66 Mb
Download

Chapter 3. Configuration

System Reset

The system must be manually reset after downloading new software. When the unit has successfully loaded and programmed the new software into its FLASH memory, it will begin uploading the code to the stand-bycontroller. This will be indicated on the menu and the STATUS LED on thestand-bycard will display solid

yellow.

The stand-bycard must remain in place until the process is complete and the STATUS LED is no longer solid yellow. Removing thestand-bycard during the uploading process will corrupt the software.

Once the upload is complete, the stand-bycard willself-resetand begin running the new code. However, the active card does not reset automatically. The unit must be reset through theIMMEDIATE

RESETor SCHEDULEDRESETTIMEfunctions.

SAVE CONFIGURATION

Commits the current configuration changes to nonvolatile memory. If this option is not selected after making changes to the configuration, the unit reverts to its previous configuration when powered down.

61200659L1-1

MX2800 STS-1User Manual

3-43

Chapter 3. Configuration

3-44

MX2800 STS-1User Manual

61200659L1-1