ADTRAN 20 Ohm Adapter User Manual
75Ω / 120Ω ADAPTER
7 5 Ω / 120 Ω ADAPTER
The adapter converts a 120 Ω balanced
Set the switches located on either side of the adapter to the desired network settings. Use the same setting for both switches.
■ To convert to a75 Ω Balanced Circuit, set both switches to theOpen position.
■To convert to a 75 Ω Unbalanced Circuit, set both switches to theEarthed position.
V.35 / V.36
ADTRAN will replace or repair this product within the warranty period if it does not meet its published specifications or fails while in service. Warranty information can be found at www.adtran.com/warranty. USA and Canadian customer Faxback: (877)
For service, CAPS requests, or further information, contact one of the following numbers:
Attention: International Department 901 Explorer Boulevard
Huntsville, Alabama 35806 USA
European / Middle East / Africa
Latin America / Caribbean