ADTRAN 1200130L1 User Manual

Size:
507.77 Kb
Download

FSU

Frame Relay Service Unit

USER MANUAL

1200130L1

FSU base unit

1200130L2

FSU w/built-inDSU

61200.130L1-1A December 1996

This product includes software developed by the University of California, Berkeley, and its contributors.

901 Explorer Boulevard

P.O. Box 140000

Huntsville, AL 35814-4000

Phone: (205) 963-8000

© 1997 ADTRAN, Inc.

All rights reserved.

Printed in USA.

ABOUT THIS MANUAL

This manual is arranged so you can quickly and easily find the information you need. The following is an overview of the contents of this manual:

Chapter 1, Introduction, familiarizes you with frame relay networks and FSU highlights and gives a brief explanation of options that may be purchased for use with the FSU.

Chapter 2, Installation, describes the FSU connectors (pin assignments are given in Appendix A) and provides an installation diagram.

Chapter 3, Operation, explains how to operate your FSU using either the front panel or a VT 100 terminal interface.

Chapter 4, Applications, provides examples of some common FSU applications. This chapter includes network diagrams as well as configuration tables for each example.

Chapter 5, Configuration Overview, explains how to access the FSU configuration menu and provides menu trees for both the front panel and the VT 100 interface.

Chapters 6 through 9 provide brief explanations for selections made in the Configuration menus. These chapters are based on the first level menu branches of the Configuration menu: DTE Ports 1 and 2, Network Port, IP Routing, and System Configuration.

Chapter 10, Statistics, describes how to access statistical information from the FSU.

Chapter 11, Diagnostics, explains how to access the FSU diagnostic features, including Ping and Loopback Tests.

Appendix A provides pinouts for the FSU connectors.

Appendix B contains product specifications.

Notes provide additional useful information.

Cautions signify information that could prevent service interruption.

Warnings provide information that could prevent damage to the equipment or endangerment to human life.

FCC regulations require that the following information be provided in this manual:

1.This equipment complies with Part 68 of the FCC rules. On the bottom of the equipment housing is a label that shows the FCC registration number and Ringer Equivalence Number (REN) for this equipment. If requested, provide this information to the telephone company (REN is not required for some types of analog or digital facilities).

2.If this equipment causes harm to the telephone network, the telephone company may temporarily discontinue service. If possible, advance notification is given, otherwise, notification is given as soon as possible. The telephone company will advise the customer of the right to file a complaint with the FCC.

3.The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the proper operation of this equipment; advance notification and the opportunity to maintain uninterrupted service are given.

4.If experiencing difficulty with this equipment, please contact ADTRAN for repair and warranty information. The telephone company may require this equipment to be disconnected from the network until the problem is corrected or it is certain the equipment is not malfunctioning.

5.This unit contains no user serviceable parts.

6.An FCC compliant telephone cord with a modular plug is provided with this equipment. In addition, an FCC compliant cable appropriate for the dial backup option ordered is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using an FCC compatible modular jack, which is Part 68 compliant.

7.The following information may be required when applying to the local telephone company for leased line facilities:

Service

Digital Facility

Service Order

Network

Type

Interface Code

Code

Jacks

56 kbps Digital Interface

04DU5-56

6.0F

RJ-48S

64 kbps Digital Interface

04DU5-64

6.0F

RJ-48S

8.In the event of equipment malfunction, all repairs should be performed by ADTRAN. It is the responsibility of users requiring service to report the need for service to their distributor or ADTRAN. See the inside back cover of this manual for information on contacting ADTRAN for service.

FEDERAL COMMUNICATIONS COMMISSION

RADIO FREQUENCY INTERFERENCE STATEMENT:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio frequencies. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Shielded cables must be used with this unit to ensure compliance with Class A FCC limits.

Change or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

CANADIAN EMISSIONS REQUIREMENTS

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus as set out in the interference-causingequipment standard entitled “Digital Apparatus,"ICES-003of the Department of Communications.

Cet appareil nuerique respecte les limites de bruits radioelectriques applicables aux appareils numeriques de Class A prescrites dans la norme sur le materiel brouilleur: “Appareils Numeriques,” NMB-003edictee par le ministre des Communications.

CANADIAN EQUIPMENT LIMITATIONS

Notice: The Canadian Industry and Science Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational, and safety requirements. The Department does not guarantee the equipment will operate to the user's satisfaction.

Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. In some cases, the company's inside wiring associated with a single line individual service may be extended by means of a certified connector assembly (telephone extension cord). The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.

Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.

Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or an electrician, as appropriate.

The Load Number (LN) assigned to each terminal device denotes the percentage of the total load to be connected to a telephone loop which is used by the device, to prevent overloading. The termination on a loop may consist of any combination of devices subject only to the requirement that the total of the Load Numbers of all devices does not exceed 100.

Table of Contents

 

Chapter 1. Introduction

 

Understanding Frame Relay .................................................................................................

1

Product Overview ..................................................................................................................

2

DDS Operation ........................................................................................................................

3

56/64k DDS DSU Option ......................................................................................................

3

SNMP Management ...............................................................................................................

3

Warranty and Customer Service...........................................................................................

4

Chapter 2. Installation

 

Unpack, Inspect, Power Up...................................................................................................

5

Receiving Inspection .......................................................................................................

5

ADTRAN Shipments Include .................................................................................

5

Customer Provides...................................................................................................

5

Power Up ..........................................................................................................................

6

Rear Panel ................................................................................................................................

6

DCE Connector ................................................................................................................

8

DTE Connectors ...............................................................................................................

8

Main Telco Connector .....................................................................................................

8

Backup Connector ...........................................................................................................

8

Control Port ......................................................................................................................

9

Chapter 3. Operation

 

Front Panel ..............................................................................................................................

11

LCD Window ..........................................................................................................

11

Enter .........................................................................................................................

11

Numeric Keypad ....................................................................................................

11

Shift ..........................................................................................................................

11

Cancel .......................................................................................................................

12

Up and Down Arrows ...........................................................................................

12

Next, Prev, Add, Del ..............................................................................................

12

LED Descriptions ...................................................................................................

15

Front Panel Operation ..................................................................................................

16

VT 100 Terminal Connection and Operation ............................................................

17

FSU Menu Structure .............................................................................................................

19

Main Menu .....................................................................................................................

19

Configuration (CONFIG) ...............................................................................

19

61200.130L1-1

FSU User Manual

i

Table of Contents

 

View Statistics (STATS) ...................................................................................

19

Diagnostics (DIAG) .........................................................................................

19

Save Configuration (SAVE) ...........................................................................

20

Abort Changes (ABORT) ...............................................................................

20

Logout (VT 100 menu only) ...........................................................................

20

Chapter 4. Applications

 

SNA/SDLC with Local Spoofing ................................................................................

21

SNA and LAN Application with SNMP/Telnet Management ..............................

24

Bisync Application ........................................................................................................

27

Transparent Application ..............................................................................................

30

Chapter 5. Configuration Overview

 

Local and Remote Configuration .......................................................................................

33

Chapter 6. DTE Port Configuration

 

Port Disabled Protocol (DISABLED) ..........................................................................

41

Frame Relay Protocol ....................................................................................................

42

SDLC Protocol ................................................................................................................

46

Transparent BOP (TRANS BOP) .................................................................................

51

Bisync Protocol ..............................................................................................................

53

Transparent Async Protocol (TRANS ASYNC) ........................................................

57

PPP Synchronous Protocol (PPP SYNC) ....................................................................

59

PPP Async Protocol .......................................................................................................

62

Slip Protocol ...................................................................................................................

65

Chapter 7. Configuring the Network Port

 

Network Port .........................................................................................................................

69

Interface Type (INT TYPE) ...........................................................................................

71

Physical Layer Options (PHYS LYR OPT) .................................................................

71

Frame Relay Options (FR OPT) ...................................................................................

72

LLC2 Options (LLC2 OPT)...........................................................................................

74

Local IP Address (LOCAL IP ADDR) ........................................................................

75

Subnet Mask ...................................................................................................................

75

Transmit RIP Requests (XMIT RIP) ............................................................................

75

Process Received RIP Packets ......................................................................................

76

Priority Queue Ration (N:1) .........................................................................................

76

Chapter 8. IP Routing

 

IP Routing With the FSU .....................................................................................................

77

IP Route Table ................................................................................................................

79

ii

FSU User Manual

61200.130L1-1