Addonics Technologies IDE-CF AEUDMACF User Manual

Size:
101.75 Kb
Download

ADDONICS TECHNOLOGIES

ADDONICS TECHNOLOGIES

Model: AEUDMACF, AEUDMACFWP(read-only)

Model: AEUDMACF, AEUDMACFWP(read-only)

4-PinMolex

 

 

4-PinMolex

 

 

Power Connector

 

40-PinIDE

Power Connector

 

40-PinIDE

 

 

 

 

Connector

 

 

Connector

Power & drive

 

 

Master or Slave

 

Power & drive

 

 

Master or Slave

activity LED

 

 

Setting

 

activity LED

 

 

Setting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CF/MD Slot

 

 

CF/MD Slot

Step 1 Mount theIDE-CFAdapter PRO on a 3.5” drive bay.

Step 2 Connect a4-pinMolex power cable from the PC power supply to the4-pinMolex power connector on theIDE-CFAdapter PRO.

Step 3 By default, theIDE-CFAdapter PRO is set as a master device. Set jumper on IDE Master mode or Slave mode (J5 ON = Master, J5 OFF = Slave)

Step 4 Connect40-pinIDE connector to IDE controller on motherboard using IDE flat cable.

Note:

The IDE-CFAdapter PRO supports hot swap.

Step 1 Mount theIDE-CFAdapter PRO on a 3.5” drive bay.

Step 2 Connect a4-pinMolex power cable from the PC power supply to the4-pinMolex power connector on theIDE-CFAdapter PRO.

Step 3 By default, theIDE-CFAdapter PRO is set as a master device. Set jumper on IDE Master mode or Slave mode (J5 ON = Master, J5 OFF = Slave)

Step 4 Connect40-pinIDE connector to IDE controller on motherboard using IDE flat cable.

Note:

The IDE-CFAdapter PRO supports hot swap.

TECHNICAL SUPPORT (8:30 am to 6:00 pm PST) Phone: 408453-6212

Email: http://www.addonics.com/support/query/

TECHNICAL SUPPORT (8:30 am to 6:00 pm PST) Phone: 408453-6212

Email: http://www.addonics.com/support/query