Addonics Technologies AESNAPMRI User Manual

Size:
168.51 Kb
Download

T E C H N O L O G I E S

User Guide

Snap-InSATA Mobile Rack

(AESNAPMRSA / AESNAPMRI / AESNAPMRSI / AESNAPMRU2)

www.addonics.com

v5.1.11

Technical Support

If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST

Phone: 408-453-6212

Email: http://www.addonics.com/support/query/

Locking Mechanism: Acts as a power switch for thesnap-inmobile rack and also locks the front panel.

To turn on power and secure the hard drive to the enclosure, use the keys provided to turn the locking mechanism located on the front panel to Lock position.

AESNAPMRSA

Installation: For power,plug-ineither the4-pinMolex power connector or the15-pinSATA power connector. Connect the Serial ATA cable for data connection.

AESNAPMRI

Installation: For power,plug-inthe4-pinfloppy power connector of the Y power cable that came with the SATA to IDE adapter. Connect the40-pinIDE ribbon cable for data connection.

AESNAPMRSI

Installation: For power,plug-inthe4-pinfloppy power connector of the Y power cable that came with the SATA to SCSI adapter. Connect the68-pinSCSI cable for data connection.

AESNAPMRU2

Installation: For power,plug-inthe4-pinfloppy power connector of the Y power cable that came with the SATA to USB2.0 adapter. Connect the USB5-pinheader for data connection.