Addonics Technologies ADSACFB User Manual
T E C H N O L O G I E S
SATA - CF Adapter
(ADSACFB / ADSACFW /
PCI Slot Mount
If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Step 1: Connect
Step 2: Connect a SATA cable to the SATA connector on the adapter and the other end to the SATA controller port.
Step 3: Start the Computer.
Note: If you insert the CF card while your system is ON and it does not get detected, probably your SATA host controller does not support hot swap.