ADC EMU-830 User Manual
Size:
965.73 Kb
Download

WorldDSLTM Exchange Office Management Unit

EMU-830 User Manual

Document Number: LTPE-UM-3159-02

REVISIONHISTORY

The Revision History provides a summary of any changes in this manual. Please make sure you are using the latest revision of this manual.

Revision

Release Date

Revisions Made

01

September 30, 2004

Initial release.

 

 

 

02

September 25, 2006

Technical update for L4A/L6A.

 

 

 

This manual is available online at ADC’s website (www.adc.com/documentationlibrary/) or you can order copies of the manual by contacting your sales representative. Please ask for documentLTPE-UM-3159-02.

Copyright

©2006 ADC Telecommunications, Inc. All rights reserved.

Trademark Information

ADC is a registered trademark of ADC Telecommunications, Inc. WorldDSL is a trademark of ADC Telecommunications, Inc. No right, license, or interest to such trademarks is granted hereunder, and you agree that no such right, license, or interest shall be asserted by you with respect to such trademarks.

Other product names mentioned in this document are used for identification purposes only and may be trademarks or registered trademarks of their respective companies.

Disclaimer of Liability

Information contained in this document is company private to ADC Telecommunications, Inc., and shall not be modified, used, copied, reproduced or disclosed in whole or in part without the written consent of ADC.

Contents herein are current as of the date of publication. ADC reserves the right to change the contents without prior notice. In no event shall ADC be liable for any damages resulting from loss of data, loss of use, or loss of profits, and ADC further disclaims any and all liability for indirect, incidental, special, consequential or other similar damages. This disclaimer of liability applies to all products, publications and services during and after the warranty period.

Table of Contents

 

Chapter 1: Overview .......................................................................................................

1-1

New Features ...........................................................................................................................

1-1

Standard Features ....................................................................................................................

1-1

Front Panel ...............................................................................................................................

1-2

Major Components ...................................................................................................................

1-3

Multishelf TAO ..........................................................................................................................

1-3

SNMP .......................................................................................................................................

1-6

SNMP Management Information Base ....................................................................................

1-7

Traps ........................................................................................................................................

1-8

BOOTP and TFTP Protocols ....................................................................................................

1-9

Xmodem Protocol .....................................................................................................................

1-9

Alarms ....................................................................................................................................

1-10

Autonomous Dial-out Alarm Reporting ..................................................................................

1-10

External Shelf Clock Backup Circuit ........................................................................................

1-11

Chapter 2: Installation ....................................................................................................

2-1

EMU Jumper Settings ..............................................................................................................

2-1

EMU Installation .......................................................................................................................

2-2

Multishelf Cable Connections ...................................................................................................

2-4

Local Terminal Connections .....................................................................................................

2-5

Remote Terminal and Local Shelf Modem Connections ..........................................................

2-7

Management Station Internal Modem ................................................................................

2-7

Management Station External Modem ...............................................................................

2-7

Local Shelf Modem for Multishelf TAO ...............................................................................

2-7

Shelf Modem for SLIP Operation .............................................................................................

2-9

Chapter 3: Menu Navigation and Multishelf Configuration ........................................

3-1

Console Menu Navigation ........................................................................................................

3-1

Console Menu Options .............................................................................................................

3-1

Multishelf Configuration ............................................................................................................

3-3

Logging On .........................................................................................................................

3-3

Network Screen ..................................................................................................................

3-4

Logging in to the Main menu ..............................................................................................

3-4

Main Menu ..........................................................................................................................

3-4

Logging into DSL Circuits ...................................................................................................

3-7

Enabling or Disabling Alarm Reporting ..............................................................................

3-8

Config Menu .......................................................................................................................

3-8

Network Parameters Menu ................................................................................................

3-8

SNMP Parameters Menu ..................................................................................................

3-11

Modem Parameters (Configure and Test Dial-out Alarm Reporting) ...............................

3-14

Shelf Alarms Menu ...........................................................................................................

3-16

Remote Alarm Reporting ..................................................................................................

3-17

Set Date and Time ...........................................................................................................

3-17

LTPE-UM-3159-02

iii

Table of Contents September 25, 2006

Change Password ............................................................................................................

3-18

Set Shelf ID ......................................................................................................................

3-19

Terminal Settings ..............................................................................................................

3-20

Set to Factory Defaults .....................................................................................................

3-21

Reset EMU .......................................................................................................................

3-22

Inventory Information Screen ...........................................................................................

3-22

Managing Firmware Through the Upload Menu ....................................................................

3-24

Appendix A: Specifications .........................................................................................

A-1

Alarms ......................................................................................................................................

A-1

Power Requirements ................................................................................................................

A-1

Environmental ..........................................................................................................................

A-1

Regulatory Approvals ...............................................................................................................

A-1

Compatibility .............................................................................................................................

A-1

Appendix B: Product Support .....................................................................................

B-1

Glossary ......................................................................................................................

GL-1

iv

LTPE-UM-3159-02

List of Figures

Figure 1-1. EMU-830 Front Panel .......................................................................................

1-2

Figure 1-2. Local Management of a Single Shelf Using RS-232/Telnet .............................

1-4

Figure 1-3. Remote Management of Multiple Shelves at Two Sites Using Multishelf TAO

1-4

Figure 1-4. Multishelf TAO Network Screen .......................................................................

1-5

Figure 1-5. Multishelf TAO Main Menu Screen ...................................................................

1-5

Figure 1-6. WorldDSL Shelves Managed by SNMP through LAN and SNMP

 

 

through SLIP .....................................................................................................

1-7

Figure 1-7. EMU-830 Alarm Relay Diagram .....................................................................

1-10

Figure 1-8. External Shelf Clock and EMU-830 List 6A Backup Circuit ...........................

1-11

Figure 2-1. Location of the SLIP Header Connector P6 on the EMU-830 ..........................

2-1

Figure 2-2.

Removing the EMU-Slot Faceplate from EMS-830 ..........................................

2-2

Figure 2-3.

Installing the EMU-830 into Slot 17 of EMS-830 ..............................................

2-3

Figure 2-4.

10BASE-T Multishelf Cable Connections .........................................................

2-4

Figure 2-5.

EMU-830 Console Port Pinouts to DB-9 or DB-25 Connector .........................

2-5

Figure 2-6. Connecting a Maintenance Terminal or PC to the EMU-830 Console Port ..... 2-6

Figure 2-7. Modem to EMU Serial Cable Pinouts ...............................................................

2-9

Figure 2-8. Modem to SLIP Port Cable Pinouts ................................................................

2-10

Figure 3-1. Logon Screen Dialog Box .................................................................................

3-3

Figure 3-2. Network Screen ................................................................................................

3-4

Figure 3-3. Main Menu Screen ...........................................................................................

3-5

Figure 3-4. Config Menu .....................................................................................................

3-8

Figure 3-5. Network Parameters Menu ...............................................................................

3-9

Figure 3-6. SNMP Parameters Menu ...............................................................................

3-11

Figure 3-7. Modem Parameters Menu ..............................................................................

3-14

Figure 3-8. LOSW* and LOSW1 Alarm Reporting Screen ...............................................

3-15

Figure 3-9. LOS*, PFO* and LOSW* Alarm Reporting Screen ........................................

3-16

Figure 3-10.Shelf Alarms Menu .........................................................................................

3-16

Figure 3-11.Remote Alarm Reporting Menu Item ..............................................................

3-17

Figure 3-12.Set Date/Time Dialog Box ..............................................................................

3-18

Figure 3-13.Change Password Dialog Box .......................................................................

3-19

Figure 3-14.Set Shelf ID Dialog Box ..................................................................................

3-19

Figure 3-15.Terminal Settings Menu ..................................................................................

3-20

Figure 3-16.Restore To Factory Defaults Warning Prompt ................................................

3-21

Figure 3-17.Reset EMU Warning Prompt ..........................................................................

3-22

Figure 3-18.Inventory Information Screen .........................................................................

3-23

Figure 3-19.Upload Line Unit Menu Item ...........................................................................

3-25

Figure 3-20.Upload to Line Unit Dialog Box ......................................................................

3-25

LTPE-UM-3159-02

v

List of Figures September 25, 2006

Figure 3-21.Xmodem Transfer Message ...........................................................................

3-26

Figure 3-22.Local Line Unit Uploading Message ...............................................................

3-26

Figure 3-23.Upload EMU Menu Item .................................................................................

3-28

Figure 3-24.Upload to Local EMU Dialog Box ...................................................................

3-28

Figure 3-25.TFTP Upload EMU Prompt ............................................................................

3-29

Figure 3-26.Xmodem Upload EMU Prompt .......................................................................

3-29

Figure 3-27.Boot Loader Prompt .......................................................................................

3-30

Figure 3-28.Remote Upload EMU Dialog ..........................................................................

3-30

Figure 3-29.Remote EMU Upload Message .....................................................................

3-31

vi

LTPE-UM-3159-02

List of Tables

Table 1-1. EMU-830 List 4A and 6A Front Panel Components

........................................... 1-2

Table 1-2. WorldDSL Traps ..................................................................................................

1-8

Table 3-1. Console Menu Navigation Keys ..........................................................................

3-1

Table 3-2. Logon, Network, and Main Menu Screen Selections ..........................................

3-2

Table 3-3. DSL Line Unit Status Conditions .........................................................................

3-6

Table 3-4. DSL Circuit Alarms in Order of Severity ..............................................................

3-6

Table 3-5. Network Parameters .........................................................................................

3-10

Table 3-6. SNMP Parameters Menu ..................................................................................

3-12

Table 3-7. Data in Inventory Information Screen ................................................................

3-23

Table 3-8. Line Unit Uploads ..............................................................................................

3-25

LTPE-UM-3159-02

vii

List of Tables

September 25, 2006

viii

LTPE-UM-3159-02