ADC Carrier-Grade WiMAX Base Station WMX 5000 User Manual

Size:
194.58 Kb
Download

FlexWaveWMX 5000

Carrier-GradeWiMAX Base Station

Spec Sheet

With the FlexWaveWMX 5000, ADC delivers the industry’s highest density, highest capacity, and highest performing base station. Designed for modular growth and service evolution, the FlexWave WMX 5000 sets a new standard forcarrier-gradeWiMAX base stations.

FlexWave WMX 5000 operates in licensed and license-exemptbands under virtually all wireless conditions, giving providers a versatile platform for maximizing WiMAX revenue opportunities.

The FlexWave WMX 5000 hardware is based on the ATCA open standard, incorporating the latest advances in reliability, availability, and serviceability for carrier-grade,high-speedtelecommunications. Designed to accommodate up to 12 wireless sectors, the FlexWave

WMX 5000 system requires just 5U of rack space — making it the highest density base station currently available. This versatile, space-savingsolution allows operators to offer a broad range of voice, data, and multimedia services, while driving down the operational and capital outlays required to scale the network.

Features:

Highest capacity; highest density WiMAX base station

Modular design supporting pay-as-you-growbusiness model

Seamless co-locationwith mini and micro base stations for expanded network coverage

Comprehensive system redundancy for carrier-graderesilience

Upgradeable to IEEE 802.16e based mobility

w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1

1 0 / 0 7 • 1 0 2 5 7 8 A E FlexWaveWMX 5000

FlexWaveWMX 5000

Carrier-GradeWiMAX Base Station

The FlexWave WMX 5000 modular design accommodates a large number of deployment options. With 1:1 or 1:N redundant wireless sectors, the FlexWave WMX 5000 can support: 12-sectorbase station, redundant6-sectorbase stations, redundant four sector and other configurations within a single chassis.

The FlexWave WMX 5000 meets stringent operator deployment needs, while bridging gaps from pre-WiMAXto fixed WiMAX, indoor consumer WiMAX, and fully mobile WiMAX.

Typical Applications

Last mile, carrier deployments supporting small initial roll outs, growing to support thousands of subscribers in a single

5U platform

Converged fixed-mobileservice offering includingmulti-user,multi-application,andmulti-servicesimultaneously

Scalable VoIP service with per-subscriber

QoS and dynamic link adjustment

Fixed, nomadic, and portable WiMAX services evolving to support full mobility

Bandwidth-hungryvideo and data applications requiring low latency and predictable performance

Licensed or unlicensed WiMAX backhaul for municipal (mesh) network or cellular network remote site traffic

w w w . a d c . c o m

+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0

1 - 8 0 0 - 3 6 6 - 3 8 9 1

2

1 0 / 0 7 • 1 0 2 5 7 8 A E FlexWaveWMX 5000

FlexWaveWMX 5000

Carrier-GradeWiMAX Base Station

Specifications

Radio and System Specifications

 

Compliance:

IEEE 802.16-2004(3.5T1, 3.5T2), ETSI HiperMAN,

 

IEEE 802.16e-2005upgradeable

Duplexing Mode, PHY:

TDD, OFDM 256 FFT: SOFDMA upgradeable

Frequency:

3.3 - 3.4 GHz, 3.4 - 3.6 GHz, 5.725 - 5.925 GHz

 

Future: 2.5 - 2.7 GHz, 3.6 - 3.8 GHz, 5.150 - 5.35 GHz,

 

5.475 - 5.725 GHz

Channel Bandwidth:

3.0 MHz, 3.5 MHz, 5.5 MHz, 7.0 MHz

 

Future: 1.75 MHz, 5 MHz, 10 MHz

Step Size:

250 KHz

Radio Output Power:

17 dBm, 20 dBm, 30 dBm options

Receiver Sensitivity:

-95.1dBm (3.5 MHz)

Modulation:

BPSK, QPSK, 16QAM, 64QAM

Forward Error Correction:

Convolution coding 1/2, 2/3, 3/4

IP Networking Features/Options

 

IP Version:

IPV4 (RFC 791)

Bridging Mode:

IEEE 802.3d

Routing:

RIP V2, OSPF (future)

VLANs:

IEEE 802.1 P/Q

Security/Encryption

 

Authentication:

X.509 based authentication

Encryption:

3DES, AES CCM 128, 1024

Multi-Service/Multi-UserSupport

 

Traffic Classifier:

MAC DA/SA, 802.1 P/Q, IP SA/DA, IP Protection, IP TOS,

 

TCP/UDP Port

Scheduling/QoS:

UGS, rtPS, nrtPS, BE, CIR, MIR

Max # Sectors:

12 non-redundant;6 with 1:1 redundancy

Active Connected Subscriber Units:

up to 6144 (512 per sector)

Uni-directionalService Flows:

up to 7168 managed

Carrier Grade Features

 

Chassis:

5U Advanced TCA; 19" telco rack mountable

Power Options:

-48VDC; AC

Modularity:

Individually deployable wireless sectors, fan unit, main

 

system controller units

Redundancy:

Wireless sectors: 1:1; 1:N (future)

 

Main system controllers: 1:1

 

Power Distribution: 1:1

Physical Interfaces

 

RF sectors, IF Port:

up to 12 if port for connection to BSR (type-F,

 

Female, 75 ohM)

Ethernet Backhaul:

1 x 100 BT, 1 x 1000 BT (RJ45); 1 x 1000 B FX

Management:

10/100 BT; RS-232(RJ45): 10 BT (RJ45);RS-232

External clock, Synchronization:

1Hz Sync (BNC), 10 MHz Clock (BNC)

 

Optional GPS External Clock Input (future)

Antenna Port:

Type-N

IF Port:

Type-F

w w w . a d c . c o m

+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0

1 - 8 0 0 - 3 6 6 - 3 8 9 1

3

Management

 

 

Remote Management and Monitoring:

WaveCenter EMS Pro, CLI (Telnet), SNMP

Local Management and Monitoring:

CLI (RS 232)

 

Provisioning:

Centralized using WaveCenter EMS Pro (SNMP)

SNMP:

MIB II (RFC 1213), Enterprise MIB;

 

SNMP V2 IEEE 802.16f MIB

 

Mechanical

 

 

Indoor Unit Dimensions (W x H x D):

19 x 8.6 x 17 (inches), 48.2 x 21.8 x 43.1 (cm)

Indoor Unit Weight:

27 lbs / 12.2 kg (chassis only); 37 lbs / 16.8 kg

 

(4 sector, 1 MSC, 1 Fan Unit, DC)

Outdoor Unit (W x H x D):

2.75 x 11.75 x 11.75 (inches), 7 x 29.8 x 29.8 (cm)

IDU-ODUDistance:

up to 250 m

 

Electrical

 

 

Input DC Voltage:

-42to-58Volts (recommended),-36to-72Volts (maximum)

Input AC Voltage:

85 to 264 VAC, 47 to 63 Hz

 

Max Power Consumption:

530W DC & 550W AC

 

Environmental

INDOOR

Outdoor

Weather Protection:

na

IP65/NEMA-4

Operating Temperature (Outdoor Unit):

0º to 40º C (32º to 104º F)

-35ºto 60º C(-31ºto 149º F)

Humidity (Outdoor Unit):

10–90%,non-condensing

5-95%,non-condensing

RoHS Compliance:

yes

yes

Spec Sheet

Web Site: www.adc.com

From North America, Call Toll Free: 1-800-366-3891• Outside of North America:+1-952-938-8080

Fax: +1-952-917-3237• For a listing of ADC’s global sales office locations, please refer to our web site.

ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101

Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products orfeatures contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer

102578AE 10/07 Revision © 2007 ADC Telecommunications, Inc. All Rights Reserved