ADC AVIDIA SWD4573I1 User Manual
Size:
6.37 Mb
Download

Avidia

SYSTEMCONFIGURATION ANDMANAGEMENT

USERMANUAL

SWITCHWAREVERSION2.0

Catalog Number

SWD4573I1

December, 2000 Revision A

©Copyright 2000 ADC DSL Systems, Inc. All Rights Reserved.

ADC is a registered trademark of ADC Telecommunications, Inc. Avidia and Megabit Modem are registered trademarks and StarGazer, SwitchWare and Avidia MuxWare are trademarks of PairGain Technologies, Inc. No right, license, or interest to such trademarks is granted hereunder, and you agree that no such right, license, or interest shall be asserted by you with respect to such trademark.

Information contained in this document is company private to ADC DSL Systems, Inc., and shall not be modified, used, copied, reproduced or disclosed in whole or in part without the written consent of ADC.

Other product names mentioned in this practice are used for identification purposes only and may be trademarks or registered trademarks of their respective companies.

ii

Avidia System Configuration and Management User Manual

About This Manual

ABOUTTHISMANUAL

This manual documents the new configuration and management features included in SwitchWare Version 2.0.

This manual is intended for system engineers responsible for configuring and managing an Avidia System. It assumes a basic understanding of voice and data communications, including xDSL and ATM technologies. This manual is organized as follows:

Part I: Introduction and Setup

The chapters in this section provide an Avidia system configuration and management overview, and specific instructions for preparing to configure and manage a system. This section also provides an overview of applications and features of the Avidia system. These overview sections also indicate procedures you must complete using either the command-lineinterface or the Web interface to implement these features.

Part II: The Avidia command-lineinterface

These chapters provide instructions for configuring a system, monitoring performance, and maintaining and administering a system using the Avidia system command-lineinterface.

Part III: The Avidia Web interface

These chapters provide instructions for configuring a system, monitoring performance, and maintaining and administering a system using the Avidia system Web interface.

Appendix A provides guidance for troubleshooting and diagnostics.

Appendix B provides information about obtaining technical support, Avidia product warranty and return procedures.

Appendix C provides a key to generated error message codes.

Appendix D provides a glossary of the terms used in this manual.

Avidia System Configuration and Management User Manual

iii

Document Conventions

DOCUMENTCONVENTIONS

Two types of messages, identified by icons, appear throughout the document:

Notes contain information about special circumstances.

Cautions indicate the possibility of equipment damage or the possibility of personal injury.

COMMAND-LINEINTERFACECONVENTIONS

The following typeface conventions are specific to the Command-LineInterface chapters of this manual.

Bold courier type indicates text to be typed exactly as shown.

Unbolded courier type indicates onscreen messages or prompts.

<Angle Brackets> indicate a parameter for which you need to provide an appropriate value.

[Square Brackets] indicate an optional parameter.

[<Angle brackets within square brackets>] indicate an optional parameter that, should you include it, requires you to provide an appropriate value.

(Multiple|Values) in parenthesis separated by a vertical line indicate that you must select one of the values for that parameter. However, parentheses may also contain parameters for which you need to provide a value. For example,(all|<port>) indicates that you can typeall to view all ports or type a port number to view a specific port.

Some optional parameters contain both a command and a parameter for which you need to select from a finite set of values. For example, [-admin (up|down)] requires you to type-admin up or-admin down, should you choose to include the parameter. Optional parameters follow the required parameters in the command line, and can be included in any order.

Italic type indicates the format in which you type the information specified in the procedure.

iv

Avidia System Configuration and Management User Manual

Web Interface Conventions

WEBINTERFACECONVENTIONS

The following typeface conventions are specific to the Web-BasedInterface chapters of this manual.

This font indicates a reference to an element on the screen.

Italic type indicates the format in which you type the information specified in the procedure.

SUMMARY OFCHANGES FORVERSION2.0

The following are features of the Avidia SwitchWare Version 2.0 software release:

Avidia 2200 remote chassis with three slots including:

a combination DS1 and management card

ADSL user interface card

POTS splitter card

subtending for Avidia 2200 remote chassis

SDSL cell-baseduser interface card

IDSL frame-baseduser interface card including:

Avidia system support for TLS, RAMP1483, and PPP services

physical-layerloopback test

Frame Relay for use with IDSL frame-baseduser interface card, including selection for either FRF.5 or FRF.8 interworking

card redundancy

dual homing including redundant VCCs and VPC and static load-sharing

rt-VBRandnrt-VBRtraffic classes

OAM F4 flow loopback

Avidia System Configuration and Management User Manual

v

Summary of Changes for Version 2.0

vi

Avidia System Configuration and Management User Manual