ADC AD-15 User Manual

Size:
1.12 Mb
Download

AD-15/AD-25Parts Manual

24 VAC Phase 5

1992 thru June 30, 2002

American Dryer Corporation

88 Currant Road

Fall River, MA 02720-4781

Telephone: (508) 678-9000 /Fax: (508)678-9447

E-mail: techsupport@amdry.com

www.amdry.com

022292

 

052997WM/tf

ADC Part No. 450107

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.

The following “FOR YOUR SAFETY” cautionmust be posted near the dryer in a prominent location.

FOR YOUR SAFETY

POUR VOTRE SÉCURITÉ

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.

Important

For your convenience, log the following information:

DATE OF PURCHASE ____________________________ MODEL NO. __________________________________________

RESELLER’S NAME

_______________________________________________________________________________________

Serial Number(s)

________________________________________________________________________________________

 

________________________________________________________________________________________

 

________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order toADC at (508)678-9447or telephone your order directly to theADC Parts Department at (508)678-9000.Please specify the dryermodel number andserial number in addition to thedescription andpart number, so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructionsmust be posted in a prominent location near the dryer.

Table of Contents

 

AD-15 Control Door Assembly Without Trim

 

For OPL (Non-Coin) Models Mfd. as of July 19, 1999 ....................................................................

3

AD-25 Control Door Assembly Without Trim

 

For OPL (Non-Coin) Models Mfd. as of November 11, 1998 ..........................................................

4

AD-15 High Security Control Door Assembly

 

For ALL Coin Models

 

For OPL Models Mfd. prior to July 19, 1999 ...................................................................................

5

AD-25 High Security Control Door Assembly

 

For ALL Coin Models

 

For OPL Models Mfd. prior to November 11, 1998 .........................................................................

6

Phase 5 Coin Microprocessor Control Panel Assembly ...........................................................................

7

Phase 5 OPL Microprocessor Control Panel Assembly ...........................................................................

8

Phase 5 Coin and OPL Microprocessor Control Box Assembly ...............................................................

9

AD-15/AD-25 Control Vault Assembly .................................................................................................

10

Dual Timer “Tap Touch” Controls

 

For Models Mfd. as of November 3, 2000 .....................................................................................

11

Dual Timer Control Panel Assembly

 

For Models Mfd. prior to November 3, 2000 .................................................................................

12

Non-Microprocessor Coin Meter Control Panel Assembly

 

For Models Mfd. as of January 25, 2002 ........................................................................................

13

Non-Microprocessor Coin Meter Control Panel Assembly

 

For Models Mfd. prior to January 25, 2002 ....................................................................................

14

Non-Microprocessor Control Box Assembly ........................................................................................

15

Slide Meter Case Assembly

 

For Models Mfd. as of March 13, 2001 .........................................................................................

16

Slide Meter Case Assembly

 

For Models Mfd. Between January 13, 1995 and March 13, 2001 .................................................

17

Slide Meter Case Assembly

 

For Models Mfd. prior to January 13, 1995 ....................................................................................

18

Main Door “Steel” Assembly ................................................................................................................

19

Plastic Main Door Assembly .................................................................................................................

20

Main Door Switch Assembly Cold Rolled Steel (CRS) Door .................................................................

21

Main Door Switch Assembly

 

For Models with Plastic Doors ........................................................................................................

22

AD-15/AD-25 Cold Rolled Steel (CRS) Door Front Panel ...................................................................

23

AD-15/AD-25 Front Panel Assembly

 

For Models with Plastic Doors ........................................................................................................

24

AD-15 Basket (Tumbler)/Support Assembly .........................................................................................

25

AD-25 Basket (Tumbler)/Support Assembly .........................................................................................

26

Drop Lint Door Assembly Without Trim

 

For AD-15 OPL Models Mfd. as of July 24, 1999

 

For AD-25 OPL Models Mfd. as of November 11, 1998 ...............................................................

27

Drop Lint Door Assembly With Trim

 

For ALL Coin Models

 

For AD-15 OPL Models Mfd. prior to July 24, 1999

 

For AD-25 OPL Models Mfd. prior to November 11, 1998 .....................................................

28, 29

AD-15/AD-25 Lint Trap Assembly .......................................................................................................

30

AD-15/AD-25 Basket (Tumbler) Bearing Assembly ..............................................................................

31

AD-15/AD-25 Idler Bearing Assembly ...........................................................................................

32, 33

AD-15 Motor Mount Assembly ......................................................................................................

34, 35

AD-25 Motor Mount Assembly ......................................................................................................

36, 37

Sensor Bracket Assemblies ............................................................................................................

38, 39

ADG-15 Direct Spark Ignition (DSI) Burner Assembly

 

For Models Mfd. as of May 20, 2000 ......................................................................................

40, 41

ADG-25 Direct Spark Ignition (DSI) Burner Assembly

 

For Models Mfd. as of May 20, 2000 ......................................................................................

42, 43

ADG-15/ADG-25 Direct Spark Ignition (DSI) Burner Assembly

 

For Models Mfd. prior to May 20, 2000 ..................................................................................

44, 45

ADE-15/ADE-25 Electric Oven Assembly ......................................................................................

46, 47

ADG-15/ADG-25 DSI Johnson Control Module Assembly

 

For Models Mfd. as of May 20, 2000 ............................................................................................

48

ADG-15/ADG-25 Sail Switch/Hi-Limit Assemblies ...............................................................................

49

Single-Phase (1ø) Motor, Electric Relay Panel Assembly .......................................................................

50

3-Phase (3ø) Motor, Electric Relay Panel Assembly ..............................................................................

51

Slide Meter Control Box Assembly

 

For Models Mfd. as of January 13, 1995 ........................................................................................

52

Slide Meter Control Box Assembly

 

For Models Mfd. prior to January 13, 1995 ....................................................................................

53

ADS-15/ADS-25 Steam Coil/Air-Operated Steam Damper Assembly ............................................

54, 55

ADS-15/ADS-25 Steam Coil/Mechanical Steam Damper Assembly ...............................................

56, 57

AD-15/AD-25 Outer Top/Back Guard Assembly .................................................................................

58

ADG-15/ADG-25 Heat Reclaimer Assembly ........................................................................................

59

Microprocessor Coin Acceptors Listing ................................................................................................

60

Coin Meter Replacement Parts .............................................................................................................

61

AD-15/AD-25 Transformer Usage Listing for Gas/Steam Dryers ...........................................................

62

ADE-15/ADE-25 Transformer Usage Listing for Electric Dryers ...........................................................

63

ADE-15/ADE-25 Electric Oven Component Application Charts ...........................................................

64

AD-15/AD-25 DSI Burner Assembly Specifications .............................................................................

65

Additional Parts Available ..................................................................................................................

66

AD-15Control Door Assembly Without Trim

3

For OPL (Non-Coin)Models Mfd. as of July 19, 1999

 

Illus. No.

Part No.

Qty.

Description

1

881053

1

ADC Logo ONLY (with double adhesive tape)

 

870011

1

Logo Double Tape Kit

2

883097*

1

Control Door

 

 

 

(includes illus. nos. 2 and 3)

3

117604

4

Neoprene Sponge Tape (sold by the foot)

4

150300

4

#10-16x 1/2” Hex Washer TEK Screw

5

102603

1

Control Door Rod Support Catch

6

102601

1

Control Door Retainer Clip

7

102502

1

Control Door Support Rod

8

882541

2

Spring Turn Latch Assembly

*Specify color when ordering.

Telephone: (508) 678-9000

Fax: (508) 678-9447

4

AD-25Control Door Assembly Without Trim

 

For OPL (Non-Coin)Models Mfd. as of November 11, 1998

Illus. No.

Part No.

Qty.

Description

1

881053

1

ADC Logo ONLY (with double adhesive tape)

 

870011

1

Logo Double Tape Kit

2

882265*

1

Control Door

 

 

 

(includes illus. nos. 2 and 3)

3

117604

4

Neoprene Sponge Tape (sold by the foot)

4

150300

4

#10-16x 1/2” Hex Washer TEK Screw

5

102603

1

Control Door Rod Support Catch

6

102601

1

Control Door Retainer Clip

7

102502

1

Control Door Support Rod

8

882541

2

Spring Turn Latch Assembly

*Specify color when ordering.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

AD-15High Security Control Door Assembly

5

For ALL Coin Models

For OPL Models Mfd. prior to July 19, 1999

Illus. No.

Part No.

Qty.

Description

1

160015

1

High Security MK-100Lock Assembly with Key (for coin models Only)

 

160104

1

MK-100Key ONLY

 

160011

1

Special Dummy Lock ONLY (for non-coinmodels Only)

2

160016

1

Lock Cam ONLY

3

881053

1

ADC Logo with Tape

 

870011

1

Double Sided Tape Kit

4

800023*

1

AD-15High Security Control Door Assembly with Gray Trim

 

 

 

(includes illus. nos. 4 through 7)

 

883265*

1

AD-15High Security Control Door Assembly with Black Trim

 

 

 

(includes illus. nos. 4 through 7)

 

800140

1

AD-15High Security Stainless Steel Control Door Assembly with Gray

 

 

 

Trim Less Lock

 

 

 

(includes illus. nos. 4 through 7)

 

801197

1

AD-15High Security Stainless Steel Control Door with Black Trim

 

 

 

(includes illus. nos. 4 through 7)

5

180200

1

AD-15Top Gray Trim Strip with Lock Hole

 

180300

1

AD-15Top Black Trim Strip with Lock Hole

6

117603

3

Suppressor Tape/Gasket (sold by the foot)

7

150201

5

#10-32x 1/4” Phillips Round Head Machine Screw

8

150300

4

#10-16x 1/2” Hex Washer TEK Screw

9

102603

1

Control Door Rod Support Catch

10

102601

1

Control Door Rod Retainer Clip

11

102502

1

Control Door Support Rod

*Specify color when ordering.

Telephone: (508) 678-9000

Fax: (508) 678-9447

6

AD-25High Security Control Door Assembly

For ALL Coin Models

For OPL Models Mfd. prior to November 11, 1998

Illus. No.

Part No.

Qty.

Description

1

160015

1

High Security MK-100Lock Assembly with Key (for coin models Only)

 

160104

1

MK-100Key ONLY

 

160017

1

Special Dummy Lock ONLY (for non-coinmodels Only)

2

160016

1

Lock Cam ONLY

3

881053

1

ADC Logo with Tape

 

870011

1

Double Sided Tape Kit

4

800022*

1

AD-25High Security Control Door Assembly with Gray Trim

 

 

 

(includes illus. nos. 4 through 7)

 

800141

1

AD-25High Security Stainless Steel Control Door Assembly with Gray

 

 

 

Trim Less Lock

 

 

 

(includes illus. nos. 4 through 7)

 

883266*

1

AD-25High Security Control Door Assembly with Black Trim

 

 

 

(includes illus. nos. 4 through 7)

 

882686

1

AD-25High Security Stainless Steel Control Door Assembly with Black

 

 

 

Trim

 

 

 

(includes illus. nos. 4 through 7)

5

180201

1

AD-25Top Gray Trim Strip with Lock Hole

 

180301

1

AD-25Top Black Trim Strip with Lock Hole

6

117603

3

Suppressor Tape/Gasket (sold by the foot)

 

 

 

For Models Mfd. as of February 6, 1995

7

150201

5

#10-32x 1/4” Phillips Round Head Machine Screw

8

150300

4

#10-16x 1/2” Hex Washer TEK Screw

9

102600

1

Control Door Rod Support Catch

10

102601

1

Control Door Rod Retainer Clip

11

102502

1

Control Door Support Rod

*Specify color when ordering.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Phase 5 Coin Microprocessor Control Panel Assembly

7

Illus. No.

Part No.

Qty.

Description

1

112526

1

Coin Keyboard Label Assembly

2

883537

1

Phase 5 Coin Control Panel Assembly

 

 

 

 

(includes illus. nos. 1, 2, and 4 through 6)

 

 

 

 

(for models mfd. as of June 25, 2002)

 

883538

1

Phase 5 Coin Control Panel Assembly with Battery Option

 

 

 

 

(includes illus. nos. 1, 2, and 4 through 6)

 

 

 

 

(for models mfd. as of June 25, 2002)

 

883582

1

Phase 5 Coin Control Panel Assembly with Battery Option

 

 

 

 

(includes illus. nos. 1, 2, and 4 through 6)

 

 

 

 

(for models mfd. prior to June 25, 2002)

 

883581

1

Phase 5 Coin Control Panel Assembly

 

 

 

 

(includes illus. nos. 1, 2, and 4 through 6)

 

 

 

 

(for models mfd. prior to June 25, 2002)

 

883539

1

Coin Control Panel ONLY

 

 

 

 

(for models mfd. as of June 25, 2002)

 

883540

1

Coin Control Panel ONLY with Battery Bracket

 

 

 

 

(for models mfd. as of June 25, 2002)

 

883580

1

Coin Control Panel ONLY

 

 

 

 

(for models mfd. prior to June 25, 2002)

 

883579

1

Coin Control Panel ONLY with Battery Bracket

 

 

 

 

(for models mfd. prior to June 25, 2002)

3

150309

1

#10-16x 1/2” Hex Head TEK Crimptite Screw

4

137213

1

Phase 5 Coin Controller ONLY

 

824998

1

Phase 5 Battery Clip

5

153010

2

#6 Star Washer

6

150005

2

#6-32x 1/4” Phillips Round Head Machine Screw

7

--------

1

Microprocessor Coin Acceptor

 

 

 

 

(refer to Microprocessor Coin Acceptors Listing on page 60)

8

--------

1

Optic Switch ONLY

 

 

 

 

(refer to Microprocessor Coin Acceptors Listing on page 60)

9

137023

1

Optic Switch Connector ONLY

10

137021

3

Microprocessor Socket ONLY

 

880772

1

Single Coin Optical Switch Harness

 

122800

1

Microprocessor (female) Pin Extraction Tool

11

136048

1

1/8-Amp(Slo-Blo)Fuse ONLY

IMPORTANT:

Check label on computer chip to verify correct part number for controller.

Telephone: (508) 678-9000

Fax: (508) 678-9447

8

Phase 5 OPL Microprocessor Control Panel Assembly

Illus. No.

Part No.

Qty.

Description

1

112535

1

OPL English Keyboard Label Assembly

 

112276

1

OPL Stick-OnLabels (English Only)...Not Illustrated

 

112275

1

3-LanguageOPLStick-OnLabels...Not Illustrated

 

 

 

(Spanish, Italian, and Hebrew)

 

112277

1

3-LanguageOPLStick-OnLabels...Not Illustrated

 

 

 

(English, Spanish, and Hebrew)

 

112278

1

5-LanguageOPLStick-OnLabels...Not Illustrated

 

 

 

(Italian, Dutch, French, German, and Chinese)

2

801255

1

Phase 5 Microprocessor Control Panel ONLY

 

801256

1

Phase 5 Microprocessor Control Panel ONLY with Battery Bracket

 

801206

1

Phase 5 OPL Non-ReversingMicroprocessor Control Panel Assembly

 

 

 

Complete

 

 

 

(includes illus. nos. 1 through 6)

 

801207

1

Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete

 

 

 

(includes illus. nos. 1 through 6)

3

137222

1

Phase 5 OPL Non-ReversingController ONLY

 

137231

1

Phase 5 OPL Reversing Controller ONLY

 

824998

1

Phase 5 Battery Clip

4

153010

2

#6 Star Washer

5

150005

2

#6-32x 1/4” Phillips Round Head Machine Screw

6

150300

1

#10-16x 1/2” Hex Washer TEK Screw

 

 

 

(for models mfd. as of March 1, 1994)

 

882541

1

Spring Turn Latch (2-piece)...NotIllustrated

 

 

 

(for models mfd. prior to March 1, 1994)

7

136048

1

1/8-Amp(Slo-Blo)Fuse

IMPORTANT: Check label on computer chip to verify correct part number for controller.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781