ADC Active Digital Signal Cross-Connect ASX User Manual

Size:
108.69 Kb
Download

ASX Active Digital Signal Cross-Connect

Spec Sheet

Part of ADC KRONE’s innovative family of active digital signal cross-connectproducts, the ASX fully integrates an SDH multiplexer with a FlexDSX® cross-connectchassis. The product allows easy migration of 2 Mbit equipment to next generation equipment, as well as enabling additional capacity and transition to fibre optic backhaul to support increasing data rates.

The ASX is compatible with existing DSX installations and supports standard DSX functionalities and advantages:

Modular construction, featuring either wire-wraporLSA-PLUS® punchdown cable termination methods

Easy circuit identification through the integrated LEDs

Four-portjack cards with dual monitoring ports enable individual circuit monitoring in both directions

Cross-connectionand patching of circuits

Superior, intuitive cable management

The extremely compact STM-1level SDH multiplexer supports 1+1 MSP on the link side and management features are accessed via GIU interface. By fully integrating an SDH multiplexer into the digital distribution frame, the ASX provides space savings, as well as reducing cabling and maintenance costs.

w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1

1 1 / 0 7 • 1 0 5 3 5 0 A E   ASX Active Digital SignalCross-Connect

ASX Active Digital Signal Cross-Connect

Features

All front access

64 E1 terminations

Four fibre optic connectors (FC, SC, LC or E2000 connectors are available) for access to two

STM-11310 or 1550nmshort-hauloptics

RS232 console port

RJ45 connector access to local and remote management

Power terminals for redundant 48 VDC feed

Supported by and compliant with ITU-TG.841/ Clause 7.1 and ETS300417-3-1

Visual indicators, as well as dry contact alarms for major and minor alarms

Benefits

Save rack and floor space

Requires less space than separate DSX and MUX equipment, making it ideal for installation in remote sites where space is limited

Reduce installation time and costs

Fibre optic cable replaces large bundle of copper cabling between the DDF and network elements (MUX, ADM, switch, channel bank, DSLAM)

Pre-configuredsystem, with easy serviceturn-up,limits requirement for special,highly-trainedstaff

Lower equipment costs

Carrier can dedicate MUX functionality to specific applications

Increase operational response time

Pre-provisionalternativecross-connects,which can be automatically switched without craft dispatch for manualre-routing

Increase quality of service (QoS)

Local or remote testing/monitoring for all relevant test parameters

O r d e r i n g I n f o r m a t i o n

Description

Catalogue Number

 

 

ASX with wire-wrapcross-connects,singlemode LC duplex fibre optic connectors, 155 Mbps

 

 

1310 wavelength; distance: 20km

ASX-100001-LC

 

 

1310 wavelength; distance: 50km

ASX-110001-LC

 

 

1550 wavelength; distance: 80km

ASX-120001-LC

 

 

1550 wavelength; distance: 120km

ASX-130001-LC

 

 

1550 wavelength; distance: 160km

ASX-140001-LC

 

 

ASX with wire-wrapcross-connects,singlemode SC fibre optic connectors, 155 Mbps, bidirectional

 

 

 

Tx:

1310, Rx: 1550; distance: 20km

ASX-100001-SC

 

 

 

Tx:

1550, Rx: 1310; distance: 20km

ASX-110001-SC

 

 

 

Tx:

1310, Rx: 1550; distance: 40km

ASX-120001-SC

 

 

 

Tx:

1550, Rx: 1310; distance: 40km

ASX-130001-SC

 

 

 

Tx:

1310, Rx: 1550; distance: 80km

ASX-140001-SC

 

 

 

Tx:

1550, Rx: 1310; distance: 80km

ASX-150001-SC

 

 

 

w w w . a d c . c o m

+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0

1 - 8 0 0 - 3 6 6 - 3 8 9 1

2

1 1 / 0 7 • 1 0 5 3 5 0 A E   ASX Active Digital SignalCross-Connect

ASX Active Digital Signal Cross-Connect

O r d e r i n g I n f o r m a t i o n

Description

Catalog Number

 

 

ASX with LSA-PLUS® cross-connects,singlemode LC duplex fibre optic connectors, 155 Mbps

1310 wavelength; distance: 20km

ASX-100008-LC

 

 

1310 wavelength; distance: 50km

ASX-110008-LC

 

 

1550 wavelength; distance: 80km

ASX-120008-LC

 

 

1550 wavelength; distance: 120km

ASX-130008-LC

 

 

1550 wavelength; distance: 160km

ASX-140008-LC

 

 

ASX with LSA-PLUS® cross-connects,singlemode SC fibre optic connectors, 155 Mbps, bidirectional

Tx: 1310, Rx: 1550; distance: 20km

Tx: 1550, Rx: 1310; distance: 20km

Tx: 1310, Rx: 1550; distance: 40km

Tx: 1550, Rx: 1310; distance: 40km

Tx: 1310, Rx: 1550; distance: 80km

Tx: 1550, Rx: 1310; distance: 80km

ASX-100008-SC

ASX-110008-SC

ASX-120008-SC

ASX-130008-SC

ASX-140008-SC

ASX-150008-SC

ASX with STM-1connector type: 1.6/5.6, 45° angled

Wire-wrap

ASX-220001

 

 

LSA-PLUS®

ASX-220008

Accessories

 

 

 

Three-conductorbantam patch cords for E1 jack interface

 

 

 

Single plug

 

 

 

0,3 m

PJ712

 

 

0,92 m

PJ716

 

 

1,83 m

PJ722

 

 

3,05m

PJ1210

 

 

3,66 m

PJ1212

 

 

4,58 m

PJ1415

 

 

6,1 m

PJ1420

 

 

7,63 m

PJ1425

 

 

9,15 m

PJ1430

 

 

15,25 m

PJ1450

 

 

Dual plug

 

 

 

0,3 m

PJ762

 

 

0,92 m

PJ766

 

 

1,83 m

PJ772

 

 

3,05m

PJ1310

 

 

3,66 m

PJ1312

 

 

6,1 m

PJ1520

 

 

7,63 m

PJ1525

 

 

9,15 m

PJ1530

 

 

15,25 m

PJ1550

 

 

Category 5 RJ45 to RJ45 patch cords

 

 

 

1 m

7063 2 527-04

 

 

3 m

7063 2 527-10

 

 

w w w . a d c . c o m

+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0

1 - 8 0 0 - 3 6 6 - 3 8 9 1

3

Spec Sheet

O r d e r i n g I n f o r m a t i o n

Description

Catalogue Number

 

 

Fibre optic patch cords

 

 

 

LC duplex connector (UPC) to LC duplex connector (UPC), 2 m

7066 1 788-52

 

 

LC duplex connector (UPC) to SC duplex connector (UPC), 2 m

7066 1 718-52

 

 

LC duplex connector (UPC) to 2 FC duplex connectors (UPC), 2 m

7066 1 528-52

 

 

Universal fibre optic adapter (duplex)

7061 2 203-00

 

 

Fibre optic attenuator, LC 15 dB

FOA-INLC015

 

 

Cross-connectwire

 

 

 

152 m roll

DSX-CCW/500

 

 

305 m roll

DSX-CCW/1000

 

 

601 m roll

DSX-CCW/2000

 

 

Wire-wraptool kits

 

 

 

Manual

AUX-0X0165

 

 

Electronic

AUX-0X0800

 

 

LSA-PLUS® insertion tool

6417 2 055-01

Specifications

Dimensions (W x H x D):

209 x 482.6 x 254 mm

Weight:

15 kg

Power:

<11 Watts, -48VDC;0.38 Watts for each LED

Environmental

 

Operations:

ETS300-019-2-3class 3.2

Storage:

ETS300-019-2-1class 1.2

Transport:

ETS300-019-2-2class 2.3

Interfaces:

64x E1, multiple mapping schemes are supported including 2Mbps framed,

 

2Mbps unframed, (2) STM-1,optical (IR/SR/LR) and electrical via SFP modules

Protection:

1+1 MSP

Reliability:

MTBF > 30 years.

Management:

Web-basedintegrated craft interface (ICI) including the support of smart default

 

settings IP based management

 

Local management access via 10/100BaseT interface

 

SNMP with trap messages supported

 

Non-volatilesoftware and database stores includingback-upand restoration

Timing:

E1 and line timing (Timing Marker) support

 

Integrated SDH equipment slave clock (SEC) according to ITU G.813

 

Re-timingoption on the E1 interfaces

Standards:

In compliance with the ITU, ETSI, IEC, IEEE, IETF standards for E1 and SDH equipment

Website: www.adc.com

From North America, Call Toll Free: 1-800-366-3891• Outside of North America:+1-952-938-8080Fax:+1-952-917-3237• For a listing of ADC’s global sales office locations, please refer to our website.

ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101

Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer

105350AE  11/07  Original  ©  2007  ADC Telecommunications, Inc.  All Rights Reserved