Acer ADPC1940, F PS 040- RAB, ADPC1940-EN-3, DA-40A19 User Manual

0 (0)

TABLE OF CONTENTS

Special notes on LCD monitors ..................................................

1

Information for your safety and comfort ..................................

2

Unpacking ...................................................................................

5

Attaching/Removing the base ....................................................

6

Screen position adjustment ........................................................

6

Connecting the power cord .......................................................

7

Safety precaution .......................................................................

7

Cleaning your monitor ...............................................................

7

Power saving ...............................................................................

8

DDC ..............................................................................................

8

Connector Pin Assignment .........................................................

9

Standard Timing Table..................................................................

11

Installation.....................................................................................

12

User controls..................................................................................

13

Troubleshooting............................................................................

19

SPECIAL NOTES ON LCD MONITORS

The following symptoms are normal with LCD monitor and do not indicate a problem.

NOTES

Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears.

You may find slightly uneven brightness on the screen depending on the desktop pattern you use.

The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or less such as a missing pixel or a pixel lit all of the time.

Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours. In this case, the screen is recovered slowly by changing the image or turning off the Power Switch for hours.

EN-1

Information for your safety and comfort

Safety instructions

Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product.

CAUTION for accessibility

Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet.

Warnings

Do not use this product near water.

Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged.

Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.

Never push objects of any kind into this product through cabinet

slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.

To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface.

Never use it under sporting, exercising, or any vibrating environ ment which will probably cause unexpected short current or damage rotor devices, HDD, Optical drive, and even exposure risk from lithium battery pack.

Your device uses one of the following power supplies:

Manufacturer: FSP Technology Inc.,Model: FSP040- RAB Manufacturer: Delta Electronics Inc., Model: ADP-40PH BB

Manufacturer: Asian Power Devices Inc., Model: DA-40A19

Manufacturer: TpV Electronics ( Fujian)CO.,LTD, Model: ADPC1940, ADPC1940-

Safe listening

Follow these instructions, suggested by hearing experts,to protect your earing.

Gradually increase the volume until you can hear it clearly and comfortably and without distortion.

After setting the volume level, do not increase it afteryour ears adjust.

Limit the amount of time listening to music at high volume.

Avoid turning up the volume to block out noisy surroundings.

Turn the volume down if you can’t hear people speaking near you.

EN-2

Product servicing

Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.

Unplug this product from the wall outlet and refer servicing to qualified service personnel when:

the power cord or plug is damaged, cut or frayed

liquid was spilled into the product

the product was exposed to rain or water

the product has been dropped or the case has been damaged

the product exhibits a distinct change in performance, indicating a need for service

the product does not operate normally after following the operating instructions

-----------------------------------------------------------------------------------------------------

Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition.

LCD Pixel Statement

The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some pixels may occasionally misfire or appear as black or red dots. This has no effect on the recorded image and does not constitute a malfunction.

Tips and information for comfortable use

Computer users may complain of eyestrain and headaches after prolonged use. Users are also at risk of physical injury after long hours of working in front of a computer. Long work periods, bad posture, poor work habits, stress, inadequate working conditions, personal health and other factors greatly increase the risk of physical injury.

Incorrect computer usage may lead to carpal tunnel syndrome, tendonitis, tenosynovitis or other musculoskeletal disorders. The following symptoms may appear in the hands, wrists, arms, shoulders, neck or back:

numbness, or a burning or tingling sensation

aching, soreness or tenderness

pain, swelling or throbbing

stiffness or tightness

coldness or weakness

If you have these symptoms, or any other recurring or persistent discomfort and/or pain related to computer use, consult a physician immediately and inform your company’s health and safety department.

The following section provides tips for more comfortable computer use.

Finding your comfort zone

Find your comfort zone by adjusting the viewing angle of the monitor, using a footrest, or raising your sitting height to achieve maximum comfort. Observe the following tips:

refrain from staying too long in one fixed posture

avoid slouching forward and/or leaning backward

stand up and walk around regularly to remove the strain on your leg muscles

EN-3

take short rests to relax your neck and shoulders

avoid tensing your muscles or shrugging your shoulders

install the external display, keyboard and mouse properly and within comfort able reach

if you view your monitor more than your documents, place the display at the center of your desk to minimize neck strain

Taking care of your vision

Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The following sections provide suggestions on how to reduce eyestrain. Eyes

Rest your eyes frequently.

Give your eyes regular breaks by looking away from the monitor and focusing on a distant point.

Blink frequently to keep your eyes from drying out.

Display

Keep your display clean.

Keep your head at a higher level than the top edge of the display so your eyes point downward when looking at the middle of the display.

Adjust the display brightness and/or contrast to a comfortable level for enhanced text readability and graphics clarity.

Eliminate glare and reflections by:

placing your display in such a way that the side faces the window or any light source

minimizing room light by using drapes, shades or blinds

using a task light

changing the display’s viewing angle

using a glare-reduction filter

using a display visor, such as a piece of cardboard extended from the display’s top front edge

Avoid adjusting your display to an awkward viewing angle.

Avoid looking at bright light sources, such as open windows, for extended periods of time.

Developing good work habits

Develop the following work habits to make your computer use more relaxing and productive:

Take short breaks regularly and often.

Perform some stretching exercises.

Breathe fresh air as often as possible.

Exercise regularly and maintain a healthy body.

-----------------------------------------------------------------------------------------------------

Warning! We do not recommend using the product on a couch or bed. If this is unavoidable, work for only short periods, take breaks regularly, and do some stretching exercises.

-----------------------------------------------------------------------------------------------------

For more information and help in recycling, please visit the following websites:

Worldwide: http://www.acer-group.com/public/Sustainability/sustainability01.htm http://www.acer-group.com/public/Sustainability/sustainability04.htm

EN-4

Acer ADPC1940, F PS 040- RAB, ADPC1940-EN-3, DA-40A19 User Manual

UNPACKING

Please check the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future.

LCD Monitor

AC Adapter

AC Power Cord

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D-Sub Cable (Optional)

DVI Cable (Optional)

User Manual

Quick Start Guide

 

S232HL LCD monitor

P/N:MU.LQY00.001

$'0

2010

EN-5

Attaching the Base

--------------------------------------------------------------------

Note: Remove the monitor and monitor base from its packaging. Carefully place the monitor face-down on a stable surface -- use a cloth to avoid scratching the screen.

1Attach the the monitor stand arm to the base.

2Ensure that the base is locked onto the monitor stand arm.

Note:Take care when performing the installation to avoid injuring yourself.

SCREEN POSITION ADJUSTMENT

In oder to optimize the best viewing position, you can adjust the tilt of the monitor by using both of your hands to hold the edges of the monitor as shown in the figure below.

The monitor can be adjusted to 15 degrees up or 5 degrees down as indi-

cated by arrow below.

5o

15 o

EN-6

Loading...
+ 16 hidden pages