Acer B193 QSG_ACER_1.0_EN_B193

Size:
1.53 Mb
Download

1

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1To clean the LCD monitor screen:

Turn off the LCD monitor and unplug the power cord.

Spray a non-solventcleaning solution onto a rag and clean the screen gently.

2Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.

3Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature.

5Store the LCD monitor in a room with a temperature of -20°to 60° C(-4°to140° F). Storing the LCD monitor outside this range may result in permanent damage.

6Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

Monitor-to-PCsignal cable is frayed or damaged.

Liquid spills onto the LCD monitor or the monitor is exposed to rain.

The LCD monitor or case is damaged.

Package contents

 

 

 

 

 

 

 

 

 

 

 

DVI cable

 

 

LCD monitor Power cord

Audio cable

VGA cable

(only dual-

User’s guide

Quick start

(optional)

input

guide

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

models)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Attaching the monitor to the base

1Remove the monitor base from the packaging and place it on a stable and level workspace.

2Remove the monitor from the packaging.

3Align the release button at the buttom of the monitor with the corresponding slot at the bottom of the base. A clicking sound signifies that the monitor has been securely attached to the base.

Connecting your monitor to a computer

1 Turn off your computer and unplug your computer's power cord.

2

Connect the signal cable to the VGA and/or DVI-D(optional)

 

 

 

input socket of the monitor, and the VGA and/or DVI-D

 

 

 

(optional) output socket of the graphics card on the

 

 

 

computer. Then tighten the thumbscrews on the signal cable

 

 

 

connector.

 

2

 

3

Optional: Connect the audio input socket (AUDIO IN) of the

 

1-1

 

1-2

 

LCD monitor and the line-outport on the computer with the

 

 

 

 

 

audio cable.

 

 

 

4

Insert the monitor power cable into the power port at the

 

 

 

back of the monitor.

2

1-21-1

5

Plug the power cords of your computer and your monitor into

 

 

 

a nearby electrical outlet.

 

 

External controls

 

 

 

Auto

Auto

If the OSD is active, press Auto to exit the OSD. Once the OSD is inactive, press

 

 

Auto and the monitor will automatically optimize the display position, focus,

 

 

and clock of your display.

 

 

</>

Minus / Plus

If the OSD is active, press the Minus or Plus buttons to toggle between the OSD

 

 

options. If the OSD is inactive, press the Minus or Plus buttons to adjust the

 

 

volume. (Optional)

 

 

Menu OSD functions

Press to view the OSD. Press again to enter a selection in the OSD.

 

Power button

Turns the monitor on/off. Blue indicates power on. Amber indicates standby/

 

 

power saving mode.

 

 

English

English

2

e

Empowering a

When the OSD menu is active, this button will act as the exit key

 

Key/Exit

(exit OSD menu).

 

b

When the OSD menu is inactive, press this button to select scenario

 

 

mode.

 

 

 

Regulations and safety notices

FCC notices

This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the device and receiver.

Connect the device into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/television technician for help.

CE declaration of conformity

Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other relevant provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC, and RoHS Directive 2002/95/EC.

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain compliance with EMC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certifiedperipherals is likely to result in interference to radio and TV reception.

Caution

Changes or modifications not expressly approved by the manufacturer could void the user authority, which is granted by the Federal Communications Commission, to operate this product.

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Notice: Canadian users

This Class B digital apparatus complies with Canadian ICES-003.Remarque a I'intention des utilisateurs canadiens Cet appareil numerique de la classe B est conforme a la normeNMB-003du Canada.

Lamp disposal

LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG. FOR LAMP SPECIFIC DISPOSAL

INFORMATION CHECK WWW.LAMPRECYCLE.ORG.

Disposal of waste equipment by user in private household in the European Union

This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to

dispose of your waste equipment by handing it over it a designated collection point

for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information abut where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

3

SPECIFICATION

 

 

Driving system

TFT Color LCD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Size

19"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pixel pitch

0.294mm(H) x 0.294mm(V)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LCD Panel

 

Brightness

300cd/m2 (Typical)

 

 

 

 

 

 

 

 

 

Contrast

2000:1(ACM)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Viewable angle

160° X (H) 160° (V)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Response time

5 ms (Typical)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Panel Type

TN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Video

R, G, B Analog Interface

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

H-Frequency

30KHz - 80KHz

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

V-Frequency

50-75Hz

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Display Colors

 

16.7M Colors

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Dot Clock

 

136MHz

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Max. Resolution

 

1280 x 1024 @75Hz

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Plug & Play

 

VESA DDCCI/DDC2B

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ON Mode

< 37 W

 

 

 

 

 

 

 

ENERGY STAR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

STANDBY Mode

< 2 W

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OFF Mode

 

< 1 W

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power Consumptio ( Maximum )

40W

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Input Connector

 

D-Sub

 

 

 

 

 

 

 

 

DVI-D24pin (OnlyDual-InputModel)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Input Video Signal

 

Analog:0.7Vp-p(standard),75 OHM, Positive

 

Digital signal (Only Dual-InputModel)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Maximum Screen Size

 

Horizontal: 344.232mm

 

 

 

 

 

 

Vertical: 193.536 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power Source

 

100~240VAC, 50/60Hz

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Operating Temp: 5°C to 35°C

 

 

 

 

 

Environmental Considerations

 

Storage Temp: -20°Cto 60°C

 

 

 

 

 

 

 

 

Operating Humidity: 10% to 85%

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MTBF

 

50000 hrs/25ºC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Dimensions

 

408 (W) x 406.8 (H) x 180.4 (D) mm

 

 

 

 

 

 

 

 

 

 

 

 

 

Weight (N. W.)

 

4 kg Unit (net)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tilt: +5º to -15º

 

 

 

 

 

 

 

 

 

 

Swivel: No

 

 

 

 

 

 

 

Mechanism spec

 

Height adjustment: No

 

 

 

 

 

 

 

 

Pivot: No

 

 

 

 

 

 

 

 

 

 

Detachable foot stand: Yes (by Release button)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power Button

Auto/Exit

 

 

 

 

 

 

 

Switch/Buttons

Left (<)/ Right(>) e(Empowering) Key

 

 

 

MENU/ENTER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Contrast

RGB Color temperature

External

 

 

Brightness

Language

 

 

 

 

 

 

 

ACM On/Off

OSD position. timeout

Controls:

 

 

Focus

Auto configuration (only Analog input model)

 

 

Function

Clock

Input signal Selection (only Dual input model)

 

 

 

H.Position

DDCCI On/Off

 

 

 

 

 

 

 

 

V. Position

Display information

 

 

 

(Warm) Color

Reset

 

 

 

 

 

 

 

 

(Cool) Color

Exit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

* All specifications are subject to change without notice.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Regulatory Complianc

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LR69873

ME61

 

 

 

 

 

R31199

N214

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ADM (Acer_eDisplay_Management)

Regarding the features and operation instructions, please refer to the "Help" section in the ADM software on the CD Manual (Windows 98SE/ME/NT 4.0/2000/XP/Vista).

English