Abocom AP900 User Manual

Size:
179.36 Kb
Download

Wireless 802.11g Access Point

The AP900 is an IEEE802.11g compliant Access Point, which lets you connect yourWireless-802.11gorWireless-802.11bdevices to your wireless network. TheAP900 is not only 802.11b backwards compliant , but also provides ahigh-speedtransfer rate of up to 54Mbps, which is almost five times faster than that of wireless B products.

The AP900 can act as a Media Access Control (MAC) bridge between wired Local Area Networks, and single/multi LAN wireless network(s).

The AP900 provides 64/128 bit WEP encryption andIEEE802.1x which ensures a high level of security to protects users’ data and privacy. The MAC Address filter prevents the unauthorized MAC Addresses from accessing your Wireless LAN. Your network security is therefore double assured.

Moreover, the AP900 includes a DHCP server that will dynamically assign IP addresses to wireless clients, making it an ideal solution for quickly creating and extending a wireless local area network (WLAN) in your workplaces.

Features

High speed for wireless LAN connection up to 54 Mbps.

Supports web browser-basedconfiguration utility.

Provides 64/128-bitWEP Encryption

Provides MAC Address Filtering

Provides IEEE 802.1x, enhancing WLAN security

Built-inRADIUS authentication server based on the IEEE 802.1x standard

AP Visibility Modes

Firmware upgradeable

Supports Static IP Address and DHCP

Automatic Device Discovery

Specification

 

 

 

IEEE 802.11g

 

 

 

 

IEEE 802.11b

 

Standards

 

 

IEEE 802.11

 

 

 

 

IEEE 802.3u 100Base-TXFast Ethernet

 

 

 

ANSI/IEEE 802.3 N-wayAuto-Negotiation

 

 

 

 

 

Channels

&

 

USA (FCC): 2.412GHz ~ 2.462GHz (Ch1-11)

Frequency

 

 

Europe (CE): 2.412GHz ~2.472GHz (Ch1-13)

 

 

 

 

 

 

Data Rate (wireless)

 

54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, and 1Mbps

W/ automatic fallback

 

 

 

 

 

 

 

 

 

 

 

 

 

64-bit,128-bitWEP encryption

Security

 

 

MAC Address filter

 

 

 

802.1x

 

 

 

 

 

 

 

 

 

 

WPA (Wi-FiProtected Access)

 

 

 

 

 

 

 

Antenna

 

 

2dbi

 

 

 

 

 

 

 

 

Button

 

 

One Factory Reset button

 

 

 

 

 

 

 

 

 

 

Power

 

 

 

 

 

Status

always On / Blinking: while upgrading firmware

 

 

 

Ethernet

On: Link / Off: Not Link / Blinking: Active

LED indicators

 

 

 

 

On: 100Mbps / Off : 10 Mbps

 

 

 

 

On: Full duplex / Off: half duplex

 

 

 

 

 

 

 

 

Wireless (bridge mode)

On: Associated / Off : not Associated

 

 

 

Wireless (bridge mode)

On: Ready / Off : Not ready; Blinking : try to connect.

 

 

 

Wireless

 

Blinking : Active

Management

Power

Physical Dimension

Weight

Temperature

Humidity

Safety & Emission

Web-Basedconfiguration and management

5.0VDC, 1.5A input.

127 x 91.1 x 24.7(mm) (Width x Depth x Height)190g

Operating: 0~50

Storing: 0~70

95% maximum(non-condensing)

FCC

CE