8e6 Technologies ERH-100 (5K02-61) User Manual
Size:
5.6 Mb
Download

“H” ServerSpecifications

Physical Specifications

Specification

ERH-100Value

ERH-200Value

Height

1.7” (43mm)

1.7” (43mm)

Width

17.2” (438mm)

17.2” (438mm)

Depth

26.8” (681mm)

26.8” (681mm)

Front clearance

2 inches (76mm)

2 inches (76mm)

Side clearance

1 inch (25mm)

1 inch (25mm)

Rear clearance

3.6 inches (92mm)

3.6 inches (92mm)

Weight

43.0 lbs (19.5 kg)

44.0 lbs (19.96 kg)

8e6 EnterpriseReporterQuickStartGuide

51

Hardware Component Specifications

Specification

Value

Operating temperature range

10° C ~ 35° C (50° F ~ 95° F)

Storage temperature range

-40°C ~ +60° C(-40°F ~ 158° F)

Operating humidity range

8 ~ 90% non-condensing

Storage humidity range

5 ~ 95% non-condensing

Power supply

560W Hot-swapredundant AC power supply with

 

PFC [ 24-pin,(8-pin= 12V) ]

Rated AC input voltage

100 ~ 240V, 60-50Hz,10-5Amp per power supply

 

module (two modules included in the chassis)

Rated input frequency

50 ~ 60 Hz

Rated input current

10A (115V) to 5A (230V)

Rated output power

560W

Maximum rated BTU

N/A (see specs below)

Nominal DC output: +3.3V

21.0A

Nominal DC output: +5V

30.0A

Nominal DC output: +12V

42.0A

Nominal DC output: -12V

1.0A

Nominal DC output: +5V standby

4.0A

Regulatory (power supply)

EN 60950/IEC 60950-Compliant

 

UL Listed (USA)

 

CUL Listed (Canada)

 

TUV Certified (Germany)

Internal Product Specifications

Specification

ERH-100

ERH-200

CPU

2x3.6GHz Xeon CPU

2x3.6GHz Xeon CPU

Memory

4GB PC2700 / DDR-333ECC

4GB PC2700 / DDR-333ECC

 

SDRAM

SDRAM

Hard drive capacity

4x250GB HDD

4x400GB HDD

Connectivity

10/100/1000

10/100/1000

52

8e6 EnterpriseReporterQuickStartGuide

Front of Chassis: Control Panel

Control panel buttons, icons, and LED indicators display on the right side of the front panel. The buttons let you perform a function on the unit, while an LED indicator corresponding to an icon alerts you to the status of that feature on the unit.

The buttons and LED indicators for the depicted icons function as follows:

UID (button) – When the UID button is pressed, a steady blue LED displays on both the front and rear of the chassis (see also Rear of Chassis). These indicators are used for easy location of the chassis in a large stack configuration. The LED remains on until the button is pressed a second time.

Overheat/Fan Fail (icon) – This LED is unlit unless the chassis is overheated.

NIC2 (icon) – A flashing green LED indicates network activity on LAN2.

NIC1 (icon) – A flashing green LED indicates network activity on LAN1.

HDD (icon) – In addition to displaying in the control panel, this icon also displays on the front panel on each hard drive carrier. A green LED indicates hard drive activity. An unlit LED on a drive carrier may indicate a hard drive failure.

Power (icon) – The LED is unlit when the server is turned off. A steady green LED indicates power is being supplied to the unit’s power supplies. (See also Rear of Chassis.)

Power (button) – When the power button is pressed, the main power to the server is turned on. When the power button is pressed again, the main power to the server is removed but standby power is still supplied to the server.

8e6 EnterpriseReporterQuickStartGuide

53

Rear of Chassis

UID (LED indicator) – On the rear of the chassis, to the left of the power supplies, a steady blue UID LED indicator displays when the UID button on the control panel is pressed. This LED remains lit until the UID button is pressed again.

Power Supplies (LED indicators) – The power supplies are located at the right on the rear of the chassis. An LED indicator is located above each of the power plugs.

54

8e6 EnterpriseReporterQuickStartGuide