4XEM IPCAMW45 User Manual
Size:
3.17 Mb
Download

Email & FTP

Email

When the SMTP server supports SMTP authentication, users need to give the valid user name and password to send email via the server.

Sender email address: the email address of the sender.

There are two external mail servers that can be configured: primary and secondary. The network

camera will use the primary server as a default, and use the secondary server when the primary server is unreachable.

Server address: The domain name or IP address of the external email server.User name: This granted user name on the external email server.Password: This granted password on the external email server.

Recipient email address: The email address of the recipients for snapshots or log file. Multiple recipients must be separated by a semicolon (;).

- 23 -

www.4XEM.com

FTP

Built-in FTP server port number: This can be other than the default port 21. The user can change this value from 1025 to 65535. After a change, the external FTP client program must change the server port

of connection accordingly.

There are two external FTP servers that can be configured: primary and secondary. The network camera will use the primary server as a default, and use the secondary server when the primary server is unreachable.

Server address: The

domain name or the IP address of the external FTP server. The following user settings must be correctly configured for remote access.

FTP server port: This can be other than the default port 21. The user can change this value from 1025 to 65535.

User name: Granted user name on the external FTP server.Password: Granted password on the external FTP server.

Remote folder name: Granted folder on the external FTP server. The string must conform to that of the external FTP server. Some FTP servers cannot accept preceding slash symbol before the path without virtual path mapping. Refer to the instructions for the external FTP server for details. The folder privilege must be open for upload.

- 24 -

www.4XEM.com

Motion Detection

Enable motion detection: Check this option to turn on motion detection.

Click on this button to add a new window. At most three windows can exist simultaneously. Use the mouse to click, hold, and drag the window frame to resize or the title bar to move. Clicking on the ‘x’ at the upperright-handcorner of the window to delete the window. Remember to save in order to validate the changes.

Click on this button to save the related window settings. A graphic bar will rise or fall depending on the image variation. A green bar means the image variation is under monitoring level and a red bar means the image variation is over monitoring level. When the bar goes red, the detected window will also be outlined in red. Going back to the homepage, the monitored window is hidden but the red frame shows when motion is detected.

Window Name: The text will show at the top of the window.

Sensitivity: This sets the endurable difference between two sequential images.Percentage: This sets the space ratio of moving objects in the monitoring window. Higher sensitivity and small percentage will allow easier motion detection.

The following figure shows the screen when is clicked. The monitoring window has been outlined in red and the graphic bar goes red since the goldfish is moving.

- 25 -

www.4XEM.com

Application Settings

Application

There are four Applications available: two snapshots, one video clip and one digital input, all with the following settings. Status: ON/OFF show the status of application.

Sun - Sat: Select the days of the week to perform the application.

Time: Show Alwaysor input the time interval.

Trigger: Event trigger type has digital input, motion detection and is sequential.

Send: After Event has been triggered, IP cam will send something by email, ftp or trigger digital output.

Snapshot

Snapshot

Enable snapshot:

Enable/Disable snapshot application.

Weekly Schedule

Sun - Sat: Select the days of the week to perform the application.

- 26 -

www.4XEM.com

Time

Select Always or input the time interval.

Snapshot file name prefix

The prefix name will be added on the file name of the snapshot images.

Trigger

Event trigger type has digital input, motion detection and is sequential.

Digital input: Network Camera will send snapshots when the digital input is triggered.

*Note: Please configure Motion Detection first: There are three windows for motion detection and each needs to be defined. Select the windows which need to be monitored. If motion detection has not been set up,undefined will be shown instead of the window title. If this happens, the window can be defined by clicking onMotion detection and a note will show to direct the user to the configuration page for motion detection setup.

Motion Detection

See Motion Detection (page 25) for set-upinstructions.

Send pre-event image(s): The number ofpre-snapshotsthat will be captured and sent when a condition is triggered.

Send post-event image(s): The number ofpost-snapshotsthat will be captured and sent when a condition is triggered.

Delay second(s) before detecting next motion: Set the time delay before restarting to check on the triggering condition when the current condition is triggered.

Sequential: Snapshot interval: second(s): The Network Camera will send snapshots at the specified intervals to the external server using the method selected below. Remember: This operation is still subject to the conditions set in the weekly schedule.

Send Snapshot By

Email: This selects the uploading method following the intervals set above. The snapshot named“prefix-yyyymmdd-hhmmss.jpg”will be attached in the email.

FTP: The snapshots will be uploaded to the external FTP server with the file name defined in the next option. This can also be used to refresh the captured images stored in the external web server to build creative homepages.

FTP put snapshots with date and time suffix: This option sets up the snapshot capture

- 27 -

www.4XEM.com

date and time, which can be used to easily differentiate the snapshot file names in the sequential operation. For instance, “prefix-20030102-030405.jpg”means the JPEG image was captured in the year 2003, January the 2nd, at 3 o’clock, 4 minute, and 5 second. If this suffix is omitted, the file named “video.jpg” on the external FTP server will be refreshed at the specified interval.

Video Clip

Video Clip

Enable videoclip:

Enable/Disable video clip application.

Weekly Schedule

Sun – Sat: Select the days of the week to perform the application.

Time

Select Always or input the time interval.

Video clip file name prefix

The prefix name will be added on the file name of the video clip files.

Video clip max file size

Define the maximum size of one video clip file.

- 28 -

www.4XEM.com

Trigger

Digital input: The Network Camera will send video clip file when the digital input is triggered.

*Note: Please configure Motion Detection first: There are three windows for motion detection and each needs to be defined. Select the windows which need to be monitored. If motion detection has not been set up,undefined will be shown instead of the window title. If this happens, the window can be defined by clicking onMotion detection and a note will show to direct the user to the configuration page for motion detection setup.

Delay second(s) before detecting next event: Set the time delay before restarting to check on the triggering condition when the current condition is triggered.

Sequential: Video clip interval: second(s): The Network Camera will send the video clip file at the specified intervals to the external server using the method selected below. Remember: This operation is still subject to the conditions set in the weekly schedule.

Send Videoclip By

Email: This selects the uploading method following the intervals set above. The snapshot named“prefix-yyyymmdd-hhmmss.jpg”will be attached in the email.

FTP: The snapshots will be uploaded to the external FTP server with the file name defined in the next option. This can also be used to refresh the captured images stored in the external web server to build creative homepages.

FTP put snapshots with date and time suffix: This option sets up the snapshot capture date and time, which can be used to easily differentiate the snapshot file names in the sequential operation. For instance,“prefix-20030102-030405.jpg”means the JPEG image was captured in the year 2003, January the 2nd, at 3 o’clock, 4 minute, and 5 second. If this suffix is omitted, the file named “video.jpg” on the external FTP server will be refreshed at the specified interval.

- 29 -

www.4XEM.com

Digital Output

Digital Output

Enable digital output:

Enable/Disable digital output application.

Weekly Schedule

Sun – Sat: Select the days of the week to perform the application.

Time

Select Always or input the time interval.

Trigger

Digital input: The Network Camera will send video clip file when the digital input is triggered.

*Note: Please configure Motion Detection first: There are three windows for motion detection and each needs to be defined. Select the windows which need to be monitored. If motion detection has not been set up,undefined will be shown instead of the window title. If this happens, the window can be defined by clicking onMotion detection and a note will show to direct the user to the configuration page for motion detection setup.

Delay second(s) before detecting next event: Set the time delay before restarting to check on the triggering condition when the current condition is triggered.

- 30 -

www.4XEM.com

System Log

The Network Camera contains a system log where all system related messages for the camera can be viewed. This system log contains important information about the configuration and connection of the

camera after bootup. Remote logging is also possible on a Linux server with syslogd service running. Simply enter the IP Address and Port Number of the server to configure the remote logging option. Please note: your remote server must be RFC 3164 compliant.

Check Enable remote log and input theIP address andport number of the log server to enable the remote log facility.Current log displays the current system log file. The content of the log provides useful information about configuration and connection after systemboot-up.

- 31 -

www.4XEM.com