4XEM IPCAMW45 User Manual
3.17 Mb

Primary DNS: The primary domain name server that translates hostnames into IP addresses.Secondary DNS: Secondary domain name server that backups the Primary DNS.

Enable UPnP presentation: Enable the UPnP camera short cut

Enable UPnP port forwarding: Enable uPnP port forwarding

PPPoE: If using the PPPoE interface , fill the following settings from ISPUser name: The login name of PPPoE account

Password: The password of PPPoE account

Confirm password: Input password again for confirmation


Http port: This can be other than the default Port 80. Once the port is changed, the users must be notified of the change for the connection to be successful. For instance, when the Administrator changes the HTTP port of the Network Camera whose IP address is from 80 to 8080, the users must type in the web browser “” instead of “”.

RTSP Streaming

Access name: This is the access URL for making connection from client software. Using rtsp://<ip address>/<access name> to make connection

RTSP port: This can be other than the default Port 554


Enable DDNS: This option turns on the DDNS function.

Provider: The provider list contains four hosts that provide DDNS services. Please connect to the service provider’s website to make sure the service charges.

Host Name: If the User

- 19 -


wants to use DDNS service, this field must be filled. Please input the hostname that is registered in the DDNS server.

Username/E-mail: The Username orE-mailfield is necessary for logging in the DDNS server or notify the User of the new IP address. Note: when this field is input as “Username” the following field must be input as “Password”.

Password/Key: Please input the password or key to get the DDNS service.

Save: Click on this button to save current settings for the DDNS service and UPnP function.

Access List

The access list is to control the access permission of clients by checking the client IP address.

There are two lists for permission control: Allow List andDeny List. Only those clients whose IP address is in theAllow List and not in theDeny List can connect to the Video Server or

Network Camera for receiving the audio/video streaming.

Both Allow List andDeny List consist of a list of IP ranges. If you want to add a new IP address range, type theStart IP Address andEnd IP Address in the text boxes and click on theAdd button. If you want to remove an existing IP address range, just select from thepull-downmenu and click on theDelete button.

Both the Allow List and Deny List can have 20 entries.

- 20 -


Audio and Video


Configure for computer viewing: To make quick setting for computer viewing.Configure for mobile viewing: To make quick setting for cell phone viewing.

Video Settings

Video title: The text string can be displayed on video

Color: Select either for color or monochrome video display.

Frame Size: There are four options for video sizes. 160x120,

176x144, 320x240, & 640x480.

Power line frequency (for fluorescent light):

Change the frequency setting to eliminate

uncomfortable flash image when the light source is only fluorescent light.

There are three dependent parameters provided for video performance adjustment.

Max frame rate: Allows you to specify the maximum number of frames per second generated by the camera.

Maximum Exposure Time: Adjusts the shutter speed of the camera to allow for exposure adjustments.

Key frame interval: Determines how often full data frames are sent from the camera in the MPEG4 video stream. Lower key frame intervals improve the overall quality of the image at a cost of bandwidth usage and storage requirements.

Video Quality: This section allows you to force the camera to either operate within a certain bandwidth or maintain a certain quality level.

- 21 -


Video Orientation

Flip: Vertically rotate the video.

Mirror: Horizontally rotate the video. Check both options if the Network Camera is installed upside down.

White balance: Adjust the value for best color temperature.

Audio settings

Use: Switchinternal ormicrophone to set up the source of audio inputMute: Audio mute

Boost external microphone input: Enhance the gain of the external microphoneInternal input Gain: Modify the gain of the internal audio input

Audio type: Select audio codecAAC orGSM-AMR and the bit rate

Image Settings

Click on this button to pop up another window to tuneBrightness,

Contrast, Hueand Saturationfor video compensation. Each field has eleven levels ranged from -5 to +5. In Brightnessand Contrastfields the value 0 indicates auto tuning. The user may press to fine-tune the image. When the image is O.K., press to set the image settings.

Click on this to recall the original settings without incorporating the changes.

- 22 -