3M 9210 User Manual

129.5 Kb


Particulate Respirator 9210 and 9211, N95


page 1 of 2

Issue Date 01/01/04

Workers want respirators that are comfortable, lightweight and convenient. That’s why 3M, with its long experience in filtration technologies, designed a family of respirators that provides high levels of comfort and value.

Features & Benefits

NIOSH approved N95

At least 95% filtration efficiency against solid and liquid aerosols that do not contain oil.* TC-84A-2668(9211)TC-84A-2669(9210)

Three-panelrespirator with innovative design

Low profile for better visibility and compatibility with a wide variety of safety equipment.

Conforms to a wide range of face sizes.

Offers convenient storage and portability prior to use.

Soft cover web on inner panel

Feels comfortable against the skin.

Soft nose foam pad, and conformable nose clip

Adjusts easily.

Helps provide a custom fit and secure seal.

Reduces the potential for eyewear fogging.

3MTM Particulate Respirator 9211, N95

(Inset photo: 3MTM Particulate Respirator 9210, N95)

Individually packaged

Helps prevent contamination during storage.

Helps increase worker acceptance.

Allows for easy dispensing.

3MTM Cool FlowTM Exhalation Valve — 9211 only

Patented one-wayvalve offers easy exhalation and cool, dry comfort.

Central positioning of the 3MTM Cool FlowTM Exhalation Valve allows for efficient performance.

Lightweight, collapseresistant design

Promotes greater worker comfort.

Contributes to increased wear time.

Suggested Applications





General maintenance

Other operations that create dust


These respirators help reduce exposure to certain particles. Misuse may result in sickness or death.

Before use, the wearer must read and understand User Instructions provided as a part of product packaging. Time use limitations may apply. For proper use, see package instructions, supervisor or call 3M OH&ESD Technical Service in U.S.A.,1-800-243-4630.In Canada, call1-800-267-4414.

*Tested against particles approximately 0.3 micron in size (mass median aerodynamic diameter) per 42 CFR 84.

3MTM Particulate Respirator 9210 and 9211, N95


page 2 of 2



3M Particulate Respirator

9210, N95



Per Box

Per Case







3M Particulate Respirator

9211, N95



Per Box

Per Case







Technologies (Check marks indicate technologies featured in these products.)





































Advanced Electret Media


3MTM Cool FlowTM



Advanced electrostatically

Designed for comfort

Exhalation Valve



charged microfibers

and convenience.

Patented one-wayvalve for

help make breathing




easy exhalation and cool,

easier and cooler.




dry comfort.













































Use For:

Solids such as those from textile operations, dry chemical handling, surface preparation, food preparation and handling, woodworking, grain handling and milling, processing minerals and coal and certain other substances.

Liquid or non-oilbased particles from sprays that do not also emit harmful vapors.

Do Not Use For:

Gases, vapors, including those present in paint spraying operations, oil aerosols, asbestos, arsenic, cadmium, lead, 4,4'-methylenedianiline(MDA) or sandblasting. Aerosol concentrations that exceed 10 times the OSHA PEL, or applicable exposure limits, whichever is lower. This respirator does not supply oxygen.

Distributed by:



(888) 933-0100


Before using these respirators, you must determine the following:

1.The type of contaminant(s) for which the respirator is being selected.

2.The concentration level of contaminant(s).

3.Whether the respirator can be properly fitted on the wearer’s face. Do not use with beards, on other facial hair, or other conditions that prevent a good seal between the face and the faceseal of the respirator.

4.Before use of these respirators, a written respiratory protection program must be implemented, meeting all the requirements of OSHA 29 CFR 1910.134, including training, medical evaluation and fit testing.

Time Use Limitation

If respirator becomes damaged, soiled, or breathing becomes difficult, leave the contaminated area immediately and replace the respirator.

3M Occupational Health and Environmental Safety Division

3M Center, Building 235-2W-70

St. Paul, MN 55144-1000

Additional Information

This respirator contains no components made from natural rubber latex.

For more information, please contact:

3M Occupational Health and Environmental Safety Division (OH&ESD)

In the U.S., contact:

Sales Assistance


Technical Assistance


Fax On Demand


Internet http://www.3M.com/occsafety

For other 3M products


In Canada, contact:

3M Canada Company, OH&ESD P.O. Box 5757

London, Ontario N6A 4T1

Sales Assistance

1-800-265-1840,ext. 6137

Technical Assistance (Canada only)


Fax On Demand


Internet http://www.3M.com/CA/occsafety

Technical Assistance In Mexico


5270-2255,5270-2119(Mexico City only)

Technical Assistance In Brazil


Fax On Demand O.U.S. Locations