3M 3M-MATIC CORNER LABEL APPLICATOR CA2000 User Manual

Size:
25.31 Kb
Download

3

3M-Matic

Corner Label Applicator CA2000

Technical Data

May, 2002

 

 

Description:

Specifications:

Operating Rate

and Conditions:

Power and Pneumatic

Requirements:

Agency Approval:

Apply a printed length of

of the CTD2000 Conveyor or

Scotch® Printable Label Tape to

3M-Matic case sealers.

the leading corner of the conveyed

 

box. Applicators are left hand or

 

right hand for use on either side

 

Model No: CA2000-T3V1

Print Engines:

Sato8485Se (203 dpi) standard. 8490S (305 dpi) optional

Applying Height:

A.Conveyor bed height: Bed heights from 24.50''

(622mm) to 36.00'' (915mm)

B.Box application:

Label to be applied 1.00'' minimum from bottom of box.

Label

Label

leading leg

trailing leg

Label cut mark 5/8" square

Label Sizes:

Label widths available: 2.00'' (50.8mm), 3.00'' (76.2mm), and 4.00'' (101.6mm)

Estimated CA2000 Box Rate

MINUTE

25

 

 

20

 

 

 

PER

15

 

 

10

 

 

BOXES

5

 

 

 

 

0

 

8

10

12

14

16

18

20

BOXLENGTH(INCHES)

Up to 24 boxes per minute (depending on box size).

Electrical:

Pneumatic:

100/120VAC, 12A

75 to 140 PSIG,

50/60 Hz

70 PSIG factory set point.

Designed to meet CSA

 

(C-USA)requirements.

 

Label length leading leg: 1.375'' (34.9mm) minimum to 6.00'' (152.4mm) maximum

Label length trailing leg:

3.50'' (88.9mm) minimum to 8.00'' (203.2mm) maximum

Tape Roll Diameter:

13.50'' (342.9mm) maximum

Case Sealers:

Designed to work with CTD 2000, 200a, 700a, and 700aks.

Note: Minimum box weight may be required for bottom belt only case sealer.

Conditions:

A.Temperature:

50°F to 100°F with clean, dry boxes

B.Relative humidity: 10% to 90% (non-condensing)

C.Light:

No direct sunlight

Footprint:

CA2000 and 700a

60.12

10.45

49.00

MIN

54.00

MAX

77.68

16.00

MAX

MIN

86.00 MAX

24.50 MAX

6.75 MIN

BOX HEIGHT

58.00

46.25

 

 

 

 

 

 

48.00

6.87

 

 

 

 

57.36

 

 

 

Product Use: User is responsible for determining whether the product is fit for a particular purpose and suitable for user’s method of application.

Warranty and Limited Remedy: THE FOLLOWING WARRANTIES ARE MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, A CUSTOM OR USAGE OF TRADE: 3M warrants its tapes and thermal transfer ribbons will be free from defects in materials and manufacture. If a tape or thermal transfer ribbon is proved to be defective, then the exclusive remedy and 3M’s sole obligation shall be, at 3M’s option, to replace the quantity of the tape or thermal transfer ribbon which is proved to be defective or to refund the purchase price.

Equipment Warranty and Limited Remedy: THE FOLLOWING WARRANTIES ARE MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, A CUSTOM OR USAGE OF TRADE: 3M sells its3M-Matic™Corner Label Applicator CA2000, Type T3V1 with the following warranties: (1) The motors, springs and rollers will be free from all defects for ninety (90) days after delivery. (2) All other parts will be free from all defects for two (2) years after delivery. (3) The print engine will be covered by a warranty issued by the manufacturer of the print engine. Further details will be provided upon request.

If any 3M-warranteedpart is proved to be defective within its warranty period, then the exclusive remedy and 3M’s and seller’s sole obligation shall be, at 3M’s option, to repair or replace the part, provided the defective part is returned immediately to 3M’s factory or an authorized service station designated by 3M. A part will be presumed to have become defective after its warranty period unless the part is received or 3M is notified of the problem no later than five (5) calendar days after the warranty period. If 3M is unable to repair or replace the part within a reasonable time, then 3M, at its option, will replace the equipment or refund the purchase price. 3M shall have no obligation to provide or pay for the labor required to install the repaired or replacement part. 3M shall have no obligation to repair or replace (1) those parts failing due to operation misuse, carelessness, or due to any accidental cause other than equipment failure, or (2) parts failing due tonon-lubrication,inadequate cleaning, improper operating environment, improper utilities or operator error.

Limitation of Liability: 3M and seller shall not be liable for direct, indirect, special, incidental or consequential damages based upon breach of warranty, breach of contract, negligence, strict liability or any other legal theory.

The foregoing Warranty and Limited Remedy and Limitation of Liability may be changed only by a written agreement signed by authorized officers of 3M and seller.

3M-Maticis a trademark of 3M. Scotch is a registered trademark of 3M. Sato is a trademark of SATO America, Inc.

3

Packaging Systems Division

E Recycled paper

3M Center Bldg. 220-8W-01

40% pre-consumer

10% post-consumer

St. Paul, MN 55144-1000

 

Printed in U.S.A.

© 3M 2002 70-0709-6560-6