3M 3M-MATIC 700A ADJUSTABLE CASE SEALER-PRODUCTIVITY BY DESIGN User Manual

Size:
1.83 Mb
Download

3M-Matic 700a Adjustable Case Sealer

Specifications

Box

Style: Regular slotted container (RSC).

Bursting test: 125 to 275 lbs. per sq. inch single or double wall, B or C flute.

Size:

 

 

 

Min

Max

Width

6”[150mm]

21.5”[550mm]

Length

6”[150mm]

No limit

Height

4.75”[120mm]*

24.5”[625mm]

With masts mounted in upper position.

 

Height

6.5”[165mm]

28.5”[725mm]

*3.5” [90mm] with taping heads adjusted to apply 2” [50mm] tape leg lengths and mast stops relocated.

Special modifications may be available for carton sizes not listed above. Contact your 3M sales representative for information. Weight: Up to 85 lbs. [38.6kg]

Packing: Contents must support flaps.

Note: The3M-Matic700a Adjustable Case Sealer can accommodate most boxes within the size range listed above. However, if

Box Length in Direction of Seal

is less than .5

Box Height

boxes should be test run to assure proper machine performance.

Tape:

Scotch brand pressure sensitive box sealing tapes. Width: 1.5 inches or 36mm minimum to 2 inches or 50mm

maximum. Roll diameter: up to 16 inches [406mm] diameter on a 3 inch [76.2mm] diameter core.

Machine:

Power Electrical – 115 V, 60Hz, 3.8A, 440 watts, 8ft. [2.4m] power cord with grounded plug included.

Contact your 3M sales representative for power requirements not listed above.

Weight:

346 lbs. [157kg] uncrated

401 lbs. [182kg] crated

Operating rate: Up to 30 boxes per minute depending on box length.

Box drive belt speed: 75 fpm [.38m/s]

Operating conditions: Use in dry, relatively clean environments at 40˚F to 120˚F [4.4˚C to 48.9˚C] with clean dry boxes.

Machine should not be washed down or subjected to conditions causing moisture condensation on components.

Equipment Warranty and Limited Remedy: THE FOLLOWING WARRANTIES ARE MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, A CUSTOM OR USAGE OF TRADE:

3M sells its 3M-Matic™700a Adjustable Case Sealer with the following warranties:

1.The Taping Head knife blades, springs and rollers will be free from all defects for ninety (90) days after delivery.

2.All other Taping Head parts will be free from all defects for three (3) years after delivery.

3.The gearmotor will be free from all defects for one (1) year after delivery.

4.All other parts will be free from all defects for ninety (90) days after delivery.

If any part is proved to be defective within its warranty period, then the exclusive remedy and 3M’s and seller’s sole obligation shall be, at 3M option, to repair or

*Infeed/Exit conveyors are optional **Casters are optional

replace the part, provided the defective part is returned immediately to 3M’s factory or an authorized service station designated by 3M. A part will be presumed to have become defective after its warranty period unless the part is received or 3M is not notified of the problem no later than five (5) calendar days after the warranty period. If 3M is unable to repair or replace the part within a reasonable time, then 3M, at its option, will replace the equipment or refund the purchase price. 3M shall have no obligation

to provide or pay for the labor required to install the repaired or replacement part. 3M shall have no obligation to repair or replace (1) those parts failing due to operator misuse, carelessness, or due to any accidental cause other than equipment failure, or (2) parts failing due to non-lubrication,inadequate cleaning, improper operating environment, improper utilities, or operator error.

Limitation of Liability: 3M and seller shall not be liable for direct, indirect, special, incidental or consequential damages based upon breach of warranty, breach of contract, negligence, strict liability or any other legal theory.

The foregoing Equipment Warranty and Limited Remedy and Limitation of Liability may be changed only be a written agreement signed by authorized officers of 3M and seller.

70-0703-8832-0

“3M-Matic,””AccuGlide”and “Scotch” are trademarks of 3M.

36USC380

©3M 2003

 

 

 

 

3M Industrial Business

Customer Response Center

Building 21-1W-10,900 Bush Avenue St. Paul, MN 55106

1-800-362-3550www.3M.com/packaging

The 3M-Matic 700a Adjustable Case Sealer

Productivity by design

3M-Matic 700a Adjustable Case Sealer

Part of a new generation of case sealers that’s shaping the future packaging

Today, the demand for fast, dependable and cost-efficientcase sealing is strong. Tomorrow, it will be even stronger.

Our case sealing machines are specially designed to be versatile, effective and productive. They’re sturdy, compact, easy

to install. The AccuGlide™ ll taping head and the unique alternate outboard tape roll mount represent 3M’s commitment to innovation as the industry leader in case sealing systems. And 3M-Matic™components are available worldwide, just one example of how 3M case sealers are built with the demands of global businesses in mind.

The advanced features of the 3M-Matic700a Adjustable Case Sealer make sealing ofuniform-sizeregular slotted containers fast, precise and productive. A unique upper and lower drive system using four belts positively conveys cases at up to 30 per minute. 3M’s patented AccuGlide ll taping head precisely applies a full range of Scotch™ brand box sealing tapes. Manual adjustments for various box sizes can be made quickly

and easily.

The 700a has dual masts with twin lead screws to provide extra stability and to allow for uniform height adjustment. It has a gearmotor drive for heavy duty performance. Both taping heads can be removed easily for cleaning and maintenance. The attractive and functional design saves floor space. And the controls can be relocated to convert from standard left side to right side operation.

Standard features include compression rollers that position each box for precise tape sealing; an upper tape roll bracket attached to the machine for easier tape mounting; friction brake drums to prevent tape overrun and provide more consistent tape application; an easy-to-reachoutboard tape roll mount for the lower head; andeasy-to-installlaced replacement belts. Additional features are available as options.

To find out how productive the 3M-Matic700a Adjustable Case Sealer really is, see your nearest 3M sales representative or contact your local3M-Maticdistributor.

Optional low tape indicator

AccuGlide™ ll taping heads

Easily removed/installed

Gearmotor drive

Top drive belt assembly

Easily installed laced replacement belts

Nationwide service available

Stainless steel deck

Optional infeed/exit conveyor

Rigid dual support mounting system

Keyhole mounting for easy installation

Roller shafts locked in position

Ball bearing rollers

Radiused end caps

Compact, functional industrial design

16 gauge [1.5mm] formed steel frame, robotically welded

Radiused bends and large selections for added strength and rigidity

Dual masts/twin lead screws

Hexagonal threaded inserts for convenient mounting of components

Outer tubular legs through-mountedand welded to frame

Tough epoxy paint

AccuGlidell taping head

 

 

 

3M’s advanced, low impact AccuGlide ll taping head with its curvilinear track

 

 

 

insures that even lightweight corrugated cartons are securely and carefully

Optional casters

 

 

sealed. Provides positive tape starting and precise tape application. The top

 

 

Locking/swivel

Circuit breaker/contractor

Instructional and safety labeling

head floats smoothly and easily to adjust for overpacked boxes. Applies

standard 2.75 inch [70mm] tape leg lengths. Can be converted to apply 2.00

3” [76.2mm] diameter polyurethane tires

 

 

inch [51mm] leg lengths. And a built-inblade oiler helps prevents adhesive

 

 

 

buildup. The head comes with a three year guarantee.

 

 

 

Frame mounted tape drum

Adjustable friction brake tape drum

16” [406mm] tape roll diameter capacity

Locking die cast height adjustment crank

Centrally located stop switch

Options:

–Casters

–Infeed/exitconveyors–Boxhold down attachment–Lowtape indicator

Dual roller top flap compression (both sides)

Repositionable upper frame assembly stops

Easily adjusted side guides

Die cast support arms

Alternate outboard mount position for lower roll

(Tape shown mounted on low tape indicator)

Panel mounted electrical box

Can be customer mounted on opposite side

Graduated inner legs for convenient, precise bed height adjustment