3M 3M-MATIC 2000RF FULLY AUTOMATIC RANDOM CASE SEALER BROCHURE User Manual

Size:
222.99 Kb
Download

3M-MaticFully Automatic Random Case Sealer 2000rf

Specifications:

Box:

Regular Slotted Containers (RSC). 1, 2, or 3 ply

Case Capability - Physical:

 

Min

Max

Length

10" (254 mm)

24" (609.6 mm)

Width

8" (203.2 mm)

20" (508 mm)

Height

6" (152.4 mm)

20" (508 mm)

Tape:

Scotch brand pressure sensitive box sealing tapes.

Physical:

Width: Minimum 2" or (50 mm)— Maximum 3" (76 mm) Core Dia. Max. 18" (457.2 mm)

Operating Conditions:

Minimum 40°F (4.4°C)Maximum120°F (48.9°C)

Electrical Power:

230 Volt, 3-phase,30A

Air Pressure:

80 PSIG(551.6 KPa), 10 SCFM(283.2L)

Operating Rate — Cases Per Minute:

Up to 20 cpm of random size

Case Advance System:

Flight Bar

Weight — Machine Uncrated:

1500 lbs (680 Kg)

Regulatory:

FCC Class A/UL Electrical Box

Technology:

Servo

Footprint:

 

L2

 

W

L1

L1

 

L

 

H

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

W

L

L1

L2

H

Inches(mm)47.0(1193.8)146.6(3724.8)35.6(904.9)13.3(339.1)69.8(1773.7)

*Casters are optional

Product Use: User is responsible for determining whether the product is fit for a particular purpose and suitable for user’s method of application.

Warranty and Limited Remedy: THE FOLLOWING WARRANTIES ARE MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED

TO THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, A CUSTOM OR USAGE OF TRADE: 3M sells its 3M-Matic Fully Automatic Random Case Sealer 2000rf with the following warranties: 1) The Taping Head knife blades, springs and rollers will be free from all defects for ninety (90) days after delivery. 2) All other Taping Head parts will be free from all defects for three (3) years after delivery. 3) All other parts will be free from all defects for two (2) years after delivery.

Please refer to individual data pages for additional details and exceptions.

If any 3M-warrantiedpart is proved to be defective within its warranty period, then the exclusive remedy and 3M’s and seller’s sole obligation shall be, at 3M’s option, to repair or replace the part, provided the defective part is returned immediately to 3M’s factory or an authorized service station designated by 3M. A part will be presumed to have become defective after its warranty period unless the part is received or 3M is notified of the problem no later than five (5) calendar days after the warranty period. If 3M is unable to repair or replace the part within a reasonable time, then 3M, at its option, will replace the equipment or refund the purchase price. 3M shall have no obligation to provide or pay for the labor required to install the repaired or replacement part. 3M shall have no obligation to repair or replace (1) those parts failing due to operator misuse, carelessness, or due to any accidental cause other than equipment failure, or (2) parts failing due tonon-lubrication,inadequate cleaning, improper operating environment, improper utilities or operator error.

Limitation of Liability: 3M and seller shall not be liable for direct, indirect, special, incidental or consequential damages based upon breach of warranty, breach of contract, negligence, strict liability or any other legal theory.

The foregoing Warranty and Limited Remedy and Limitation of Liability may be changed only by a written agreement signed by authorized officers of 3M and seller.

3

Industrial Business

Industrial Adhesives and Tapes Division

Bldg. 21-1W-10

900 Bush Ave.

St. Paul, MN 55106 1-800-362-3550www.3M.com/packaging

AccuGlide,3M-Matic,and Scotch® are trademarks of 3M.

Printed in U.S.A. © 3M 2005

70-0710-0321-7

3

3M-Matic

Fully Automatic

Random Case Sealer 2000rf

Advanced capabilities for high volume packaging

3M-Matic Fully Automatic Random Case Sealer 2000rf…precise case closure for high speed production

For a high volume line with random case sizes or where different lines converge for sealing, the 3M-Matic Fully Automatic Random Case Sealer 2000rf features the “brains” and speed for maximum throughput capabilities.

Sensors at the case in-feedsignal an Allen Bradley PLC (Programmable Logic Controller) to automatically adjust for differing case sizes.3-stageoperation first separates cases from a flooded line with automatic gating mechanism, secondly folds all four top flaps, and finally seals the top and bottom at up to 20 cases per minute.

You can have a different size case at each stage and it’s about a 3-secondtrip from indexing gate to exit.

Dimensions adjust automatically for a wide range of typical cases: Length: 10-24"

Width: 8-20"

Height: 6-20"

Custom engineered to meet your exacting specifications including variations in case size, weight, and operator orientation.

Compact footprint saves floor space.

3MAccuGlideTaping Head

Independent tape application and buffing for high speed production

Shaft and ball bushing slide system for precise tape application

Rugged construction for reliability in high volume operations

Easily installed and removed top and bottom

Frame mounted tape roll

Adjustable friction brake drum to maintain proper tape tension and prevent overcoasting for smooth tape application

Up to 16" tape diameter capacity

Use with a full range of Scotch® Box Sealing Tapes in 36 mm to 48 mm widths

Allen Bradley PLC

(Programmable Logic Controller)

Analyzes sensor input and controls sequence and timing for 3-stageoperation of indexing, folding, and sealing

Controls function of each stage

Electric control panel

with main disconnect switch

Mounted on either side for fast access and convenient line configuration

Top flap compression rollers on each side

Positions and closes flaps before taping for an improved seal

Flap kicker for automatic closure

Servo drive motors

Consistent power for precision positioning with greater response time

Lug drive for precise conveyance

• Moves heavier boxes more consistently

Sliding plexiglass access doors

• Total enclosure for safety with

electrical/pneumatic interlock

Photo eye sensor

 

Light curtain

 

• Detects start and end of the

 

• Light sensors for

case so that the PLC knows

 

detecting case height

the exact case position

 

 

Safety access-controlpanels

• Punched steel to

observe case flow

Centering station

Keep cases centered under the taping head

Adjusts for box width

Adjustable pressure and height

Indexing

Separates boxes from flooded infeed conveyor

Optional casters

Caster brake and locking swivel for on the job stability

Large 4" diameter

polyolefin tires for easy movement

Box Capacities

Length: 10" to 24" Width: 8" to 20" Height: 6" to 20"