3M 3M-MATIC 110A MANUALLY ADJUSTABLE SEMI-AUTOMATIC CASE SEALER User Manual

Size:
223.44 Kb
Download
is less than .75

3M-Matic Adjustable Case Sealer 110a

Specifications:

Box:

 

 

Style: Regular slotted container (RSC)

 

Size:

Min

Max

Length

6" (150 mm)

No limit

Width

6" (150 mm*)

22.5" (575 mm)

Height

3.5" (90 mm)

22.5" (575 mm)

Note: Cartons smaller than 9.2" (235 mm) in width may require more frequent belt replacement because of limited contact area. Box weight (filled): 5 lbs. (2.3 kg) to 65 lbs. (29.5 kg).

Contents must support flaps.

Note: The3M-Matic 110a can accommodate most boxes within the size range listed above.

However, if

Box length in Direction of Seal Box Height

boxes should be test run to ensure proper machine performance.

Tape:

3M pressure sensitive box sealing tapes. Width: 36 mm minimum to 48 mm maximum.

Roll diameter: up to 405 mm maximum on a 76.2 mm diameter core.

Machine:

Power: Electrical — 115 V, 60Hz, 2.8A single phase. Other voltages are available regionally.

Weight:

291 lbs. (132kg) crated

211 lbs. (96kg) uncrated

Operating rate: Up to 30 cases per minute depending on box length.

Box drive belt speed: 108 f/s (33 m/s)

Operating conditions: Use in dry, relatively clean environments at 41°F (5°C) to 104°F (40°C) with clean, dry boxes.

Machine should not be washed down or subjected to conditions causing moisture condensation on components.

Footprint:

Infeed/Exit Conveyor

 

L

F

F

Box Travel

 

 

W

 

A

H

B

C

W

L

H

A*

B

C*

F

Mininches(mm)29(738)38(965)53.8(1365)17.75(440)22.5**(572)4.8(121)24.5(625)

Max inches (mm) 29(738)38(965)82**(2083)17.75(440)33.5**(851)4.8(121)24.5(625)

*Infeed/Exit conveyors are optional ** Casters are optional

Product Use: User is responsible for determining whether the product is fit for a particular purpose and suitable for user’s method of application.

Warranty and Limited Remedy: THE FOLLOWING WARRANTIES ARE MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED

TO THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, A CUSTOM OR USAGE OF TRADE: 3M sells its 3M-Matic Bottom Belt Drive Case Sealer 110a with the following warranties: 1) The Taping Head knife blades, springs and rollers will be free from all defects for ninety (90) days after delivery. 2) All other Taping Head parts will be free from all defects for three (3) years after delivery. 3) All other parts will be free from all defects for two (2) years after delivery.

Please refer to individual data pages for additional details and exceptions.

If any 3M-warrantiedpart is proved to be defective within its warranty period, then the exclusive remedy and 3M’s and seller’s sole obligation shall be, at 3M’s option, to repair or replace the part, provided the defective part is returned immediately to 3M’s factory or an authorized service station designated by 3M. A part will be presumed to have become defective after its warranty period unless the part is received or 3M is notified of the problem no later than five (5) calendar days after the warranty period. If 3M is unable to repair or replace the part within a reasonable time, then 3M, at its option, will replace the equipment or refund the purchase price. 3M shall have no obligation to provide or pay for the labor required to install the repaired or replacement part. 3M shall have no obligation to repair or replace (1) those parts failing due to operator misuse, carelessness, or due to any accidental cause other than equipment failure, or (2) parts failing due tonon-lubrication,inadequate cleaning, improper operating environment, improper utilities or operator error.

Limitation of Liability: 3M and seller shall not be liable for direct, indirect, special, incidental or consequential damages based upon breach of warranty, breach of contract, negligence, strict liability or any other legal theory.

The foregoing Warranty and Limited Remedy and Limitation of Liability may be changed only by a written agreement signed by authorized officers of 3M and seller.

3

Industrial Business

Industrial Adhesives and Tapes Division

Bldg. 21-1W-10

900 Bush Ave.

St. Paul, MN 55106 1-800-362-3550www.3M.com/packaging

AccuGlide,3M-Matic,and Scotch® are trademarks of 3M.

Printed in U.S.A. © 3M 2005

70-0710-0320-9

3

3M-Matic

Adjustable Case Sealer 110a

The affordable productivity improvement for light duty applications

3M-Matic Adjustable Case Sealer 110a… affordable productivity

The 3M-Matic Adjustable Case Sealer 110a is the affordable next step when your packaging volume exceeds the production limits of manual case sealing or you needback-upfor small runs, overruns, or seasonal surges.

Case size capacity is among the greatest of any case sealer in its category. And a sealing rate of up to 30 cases per minute increases productivity for both single and double shift operations.

Easy-to-installand use, you will quickly be making tight, consistent seals on a wide range of RSCs with minimal operator training.

Easily adjust for height and width on cases as small as 3.5" high x 6" wide and as large as 22.5" x 22.5".

Sturdy construction easily handles case weights from 5-65 lbs.

Compact footprint saves floor space. Optional casters easily allow you to move the machine where needed.

3MAccuGlideTaping Head 2+

The industry-provendesign features 3M patented curvilinear motion for low impact forces that helps protect your carton and contents. Even lightweight cartons are securely and carefully sealed. And now there arepluses:

Easy threading with an open tape path, lower profile side plate, and improved instructional labeling

Latching tape drum to secure tape roll for stable alignment

Lighter weight for easier handling

Height crank

Simultaneously adjusts both side masts for uniform height control

Can be repositioned on either side for convenient access and line changes

Dual masts

Provides greater stability for taping head

Case size capacity

Among the greatest range of sizes and shapes compared to other case sealers in the category

Industrial-dutyconstruction

16 gauge formed steel frame, robotically welded

Tough powder epoxy paint with textured finish for long life

Sturdy bottom belt drive

Traction-gripsurface on belts for reliable feeding of wide range of case weights

Laced drive belts for ease of replacement

Reliable motor drive

0.13 KW to handle cases up to

65-lb.cases

Optional casters

• Caster brake and locking

swivel for on the job stability

Box Capacities

• Large 4" diameter polyolefin tires

Length: 6" to no limit

for easy movement

Width: 6" to 22.5" Height: 3.5" to 22.5"

Tape drum latch

• Secures tape roll for stable tape mounting

Adjustable friction brake drum

Up to 16" tape diameter

Designed for use with a full range of Scotch® Box Sealing Tapes in 36 mm to 48 mm widths

Panel mounted on/off switch

Can be repositioned on either side for convenient access and line changes

Centrally-locatedemergency stop

• Easily accessible e-stop

Independently-mountedside guides

Keeps cases centrally positioned under the taping head

Adjust for wide box width range

Optional infeed/exit conveyor

Ball bearing rollers for smooth box conveying

Optional top flap compression rollers (not shown)

Positions and closes flaps before taping for an improved seal

No gaps between flaps