3M 1600IPB, 1600 User Manual

1600 Overhead Projector

Illustrated Parts Breakdown

3M Visual Systems Division	O.H.P. Service Documentation Resource
6801 River Place Boulevard	Copyright © 2002, 3M IPC. All Rights Reserved
Austin, Texas 78726-9000	78-6970-7536-0

Revision History

Original Issue date: 8/2002

The release date, revision level, pages changed and a description of the modifications are listed below.

Revision	Date	Page(s) Changed	Description
Rev A	4/2001	All pages	First edition released
Rev B	8/2002	Table Of Contents,	Removed reference
		Quick Reference	for 230V Electrical
		Parts Index,	Small Parts Kit,
		and Figure 0,	Figure 9.
		Pages 2, 3, and 4
		Figure 1,	Removed part
		Page 6	numbers for Arm and
			Post assemblies and
			added Note 1.
		Figure 5,	Removed item #3,
		Pages 12 and 13	Reflector, Aluminized
			Glass.
		Figure 8,	Changed Kit name to
		Page 17	Small Parts Kit and
			changed kit number
			from 78-8120-8471-9
			to 78-8120-8486-7.
			Updated list of
			included parts.
		Figure 9,	Removed Figure 9.
		Page 18	Combined 120/127V
			and 230V Kits into one
			Small Parts Kit on
			Figure 8.

NOTE: Blue text indicates a link to that page.

i

3M™ Overhead Projector 1600 Series

Illustrated Parts Breakdown

Illustrated Parts Breakdown (IPB)

This Illustrated Parts Breakdown (IPB) Manual contains the information necessary to locate and identify assemblies, sub-assemblies, and specific parts of the 1600 Overhead Projector.

Part Numbers

All components available on a replacement basis are listed with their 3M identification number. The parts identification list opposite each illustration provides the description adequate to identify components. If the component is available only as part of the next higher assembly, the description column provides the next higher assembly description or identification number.

Locating and Identifying a Part

If physical appearance and general location of an item are known:

1.Use the IPB Section Titles to help determine which assembly or sub-assembly includes the item.

2.Refer to the view for the assembly or sub-assembly and locate the item on the exploded view. Match the part callout number to the corresponding number in the parts list.

3.Parts shown inside a dashed box can only be ordered as a module or kit. Any part or mounting hardware shown outside the box is not included with the assembly.

Machine Identification Plate

The serial number plate for the 1600 is located on the bottom of the projector. The Machine Identification Plate is divided into the following components:

1.Product Name: The specific version number of the projector.

2.Model Number/Alpha Code: The series number of the projector followed by a three or four character alpha code identifier. The Alpha Code indicates the design level, specific product characteristics, power cord or distribution specific to a country.

3.Lamp: The electrical rating of the lamp.

4.MFG Code: The MFG Code indicates the year and quarter the projector was built. (See the example to the right):

5.S/N: The serial number assigned to this projector.

Ordering Parts

When ordering parts, include the following information:

1.Machine model number and serial number.

2.Parts identification number.

3.Part description.

4.Quantity required.

1

2

3

	5		4
	MFG Code
	Letter		Digit
H	1999	1	Jan-Mar
J	2000	2	Apr-Jun
K	2001	3	Jul-Sep
L	2002	4	Oct-Dec
M	2003	1	Jan-Mar

For U.S. retail customers: Call 1-800-650-8429, or fax [phone]. Dealers: Refer to Dealers Guide. 3M Subsidiaries: Contact Export Operations.

© 3M IPC 2002

1

3M™ Overhead Projector 1600 Series	Illustrated Parts Breakdown
Table of Contents
ILLUSTRATED PARTS BREAKDOWN (IPB) ....................................................................................		1
FIGURE 0. MACHINE OVERVIEW ..............................................................................................................		3
FIGURE 1. HEAD AND FOCUS ARM ASSEMBLY (10 INCH STAGE).............................................................		5
FIGURE 1. HEAD AND FOCUS ARM ASSEMBLY (10 INCH STAGE) PARTS LIST		..........................................6
FIGURE 2. HEAD AND FOCUS ARM ASSEMBLY (A4 STAGE) ...................................................................		7
FIGURE 2. HEAD AND FOCUS ARM ASSEMBLY (A4 STAGE) PARTS LIST .................................................		8
FIGURE 3. TOP COVER ASSEMBLY ...........................................................................................................		9
FIGURE 3. TOP COVER ASSEMBLY PARTS LIST ......................................................................................		10
FIGURE 4. BASE ASSEMBLY AND PARTS LIST ........................................................................................		11
FIGURE 5. INTERNAL COMPONENTS (10 INCH STAGE) ...........................................................................		12
FIGURE 5. INTERNAL COMPONENTS (10 INCH STAGE) PARTS LIST........................................................		13
FIGURE 6. INTERNAL COMPONENTS (A4 STAGE) ...................................................................................		14
FIGURE 6. INTERNAL COMPONENTS (A4 STAGE) PARTS LIST ...............................................................		15
FIGURE 7. HARDWARE KIT ....................................................................................................................		16
FIGURE 8. SMALL PARTS KIT.................................................................................................................		17
APPENDIX A. SPECIFICATIONS ...............................................................................................................		18
WHERE TO GET ADDITIONAL INFORMATION .........................................................................................		22

IMPORTANT NOTICE

3M reserves the right to sell or furnish NEW OR RECONDITIONED PARTS. New and reconditioned parts are covered by the same 3M new parts limited warranty.

© 3M IPC 2002

2

3M™ Overhead Projector 1600 Series		Illustrated Parts Breakdown
	Quick Reference Parts Index
	Description	Part	Figure	Item
		Number	No.	No.
	Mirror Module (10 inch and A4 Stage)	78-8120-8444-6	1 and 2	1
	Head Module (10 inch and A4 Stage)	78-8120-8478-4	1 and 2	2
	Arm/Post Module (A4 Stage)	78-8120-8465-1	2	3
	Focus Kit (A4 Stage)	78-8120-8466-9	2	4
	Stage Module (10 inch)	78-8120-8468-5	3	1A
	Stage Module (A4)	78-8120-8469-3	3	1B
	Fresnel Lens, Single Element (10 inch Stage)	78-8120-8487-5	3	2A
	Fresnel Lens, Dual Element (A4 Stage)	78-8120-8488-3	3	2B
	Lamp, Projection, FCS, 150W, 24V	78-8120-3026-6	5 and 6	2
	(10 inch and A4 Stage)
	Lamp Module (U.S. version, lamp, on/off switch)	78-8120-8474-3	5	4A
	Lamp Module (Latin America version, lamp, interlock)	78-8120-8473-5	5	4B
	Lamp Module (A4 Stage, lamp, reflector)	78-8120-8475-0	6	4
	Condenser Module (A4 Stage)	78-8120-8476-8	6	1
	Reflector, Aluminized Glass	- - -	5 and 6	3
	Hardware Kit	78-8120-8477-6	7	0
	Small Parts Kit	78-8120-8486-7	8	0

© 3M IPC 2002

3

3M™ Overhead Projector 1600 Series

Illustrated Parts Breakdown

Figure 0. Machine Overview

Mirror Module		Focus Arm
Spare Parts		Spare Parts
(See Figures 1 and 2)		(See Figures 1 and 2)
Head Module
Spare Parts
(See Figures 1 and 2)
Stage Module	Fresnel Lens	Post Assembly
Spare Parts	(See Figure 3)
(See Figure 3)		Spare Parts
		(See Figures 1 and 2)

Base Assembly

Spare Parts

(See Figure 4)

Hardware Kit	Internal Components
(See Figure 7)
	and Lamp Module
Small Parts Kit	Spare Parts
(See Figure 8)	(See Figures 5 and 6)

© 3M IPC 2002

4

3M™ Overhead Projector 1600 Series

Illustrated Parts Breakdown

Figure 1. Head and Focus Arm Assembly (10 inch Stage)

1

2

3

4

© 3M IPC 2002

5

3M™ Overhead Projector 1600 Series					Illustrated Parts Breakdown
		Figure 1. Head and Focus Arm Assembly (10 inch Stage) Parts List
	Item		3M		Description	Qty.
	No.		Part Number
1			78-8120-8444-6	Mirror Module		1
2			78-8120-8478-4	Head Module		1
3			(See Note 1)	Arm, Focus		1
4			(See Note 1)	Post		1

NOTE 1:

Please contact the 3M Parts Center for ordering information on these items.

© 3M IPC 2002

6