3J USB-P4V User Manual
Plugging it into your computer’s USB port, you can make and receive Skype calls. The Commercial Video Phone in high grade of quality has large LCD with backlight. Phone rings for all incoming calls. You can dial Skype numbers on the phone. And with the high quality camera, you can talk
1.Commercial Video Phone in high grade of quality, ideal for conference calls
2.With high quality camera, you can talk face to face with people all over the world
3.Start or stop video by phone keypads
4.Large LCD with blue backlight
5.Phone rings for incoming calls, ring style selectable
6.Dial Skype contacts and Skypeout number by phone keypads
7.Echo cancellation, noise reduction, full duplex communication
1.3 Camera Technical Data
2.Supports up to 30fps VGA video display
3.320 x 240 high resolution CMOS sensor
1.4 System Requirements
2.400MHz processor and free USB1.1 or USB2.0 port
3.128MB RAM and 15MB free disk space
4.Any broadband connection or minimum 33.6 Kbps dialup
1.5 Package Contents
1.One USB Video Phone
3.One User Manual
4.One USB Cable
5.One Installation CD
2 Using the USB Video Phone
2.1 Keypad Instruction
(1)Press to switch to “Contacts” tab at ready state, press again to scroll the Skype Tab.
(2)Press to switch between the hold calls while talking.
: Call List
Press to switch to “History” tab at ready state, press again to
scroll the Skype Tab.
(1)Press to clear any numbers you have input for a call.
(2)Press to scroll the Skype tab at the ready state.
(3)During a call you can press “Clear” to enable mute, press “Clear” again to disable mute.
(1)Scroll the contacts list or call list.
(2)Adjust the speaker volume while talking.
: Start or stop my video.
(1)During a call, you can press “MUTE” to mute the microphone, press again to disable mute.
(2)At ready state, you can press “MUTE” to open/mute the speaker.
Press to hold the current call, press again to reactivate the call.
: Handfree key
RING: Press to scroll the ringer style at ready state.SEND: Press to make a call
: Press to input “+” at the ready state, else input “*”.
: Press to call out.
(1)Press to input digital numbers.
(2)Press to send DTMF message while talking.
(1)Download Skype software and install it (www.skype.com). The version must be 184.108.40.206 or higher. To make video call, version 2.0 or higher is required.
(2)Run Skype and log in with Skype account.
You can create a Skype account as shown below:
After software’s startup, the icon will appear to the system tray as shown below:
That indicates the Skype are successfully connected to Internet. If the icon is shown as, please check your Internet connection.
2.3 Run SkypeMate
(1)Insert SkypeMate installation CD or download SkypeMate software, then install it.
Select the first option “Allow this program to use Skype”, click “OK” button.
Note: If you selected the wrong option, you can make another selection. Please see3. FAQ /problem4 for detail.
After running SkypeMate, the icon will appear to the system tray as shown:
That indicates the device and Skype are connected successfully.
If the icon shown as(the phone is green and the outside is grey), please run Skype first.
If the icon shown as(the phone is red and the outside is green), it means USB Video Phone is connected incorrectly. Please reconnect USB Video Phone to PC.
2.4Install Camera Driver
(1)Insert CD to
(2)The program will pop up the window as shown below:
Chick Next to start installing the driver.
Click Yes to continue.
Click Finish to finish the installation.
(1)Connect USB Video Phone to PC, the LCD shows "VOIP Phone".
(2)Connect the camera to the VIDEO port of USB Video Phone.
connect to camera
connect to PC
(1)Select the option “Enable Skype Video”.
(2)Set “Select webcam” to “VIMICRO USB PC Camera 301x”.
(3)Click Test Webcam to check if you can see yourself in the area shown as below:
(4)Click Close to go back to previous menu.
(5)Click Save to save the setting.
Now the camera is ready. You can make video calls with your friends who has PC camera too.
2.7Call another Skype user
(1)Add "bbc346" to Contacts
(3) Input number and call out:
Press digital "11" on USB Video Phone, this number will be shown on Skype window, then press SEND key to call out.
Note: If you are making a video call, you can presskey to stop the video, press it again to start the video.
2.8 Call to normal phone
Press "00"+"country number" + "phone number", then press SEND key to call out.
Example: Call to China, Beijing, press 00861012345678,
then press SEND key.
(1) You can input “+”(press “
” key) instead of “00”.
For example: Call to China, Beijing, press +861012345678.
(2)If you want to use this function, you should buy SkypeOut Credit from www.skype.com first.
2.9 Answer a call
When USB Video Phone is ringing for a incoming call , pick up handset or press handfree key to answer the call.
(1)Right click the icon on the taskbar and selectAdvance
(2)The window is shown as below:
(3)Run when Windows starts: Select to enable this feature. The SkypeMate will be launched automatically when
(4)Refuse Skype call when Skype talking: Select to enable this feature. The second incoming Skype call will be refused when talking.
(5)Display Skype window when calling: If you cancel this option, when you press the digital keys
(6)Ring style: They are 10 types of incoming ring
(7)Click the button “OK” to save the setup.
I am not able to hear any sound through the earphone?
Please execute the “Control
I can’t play music through the USB Video Phone?
Please execute the “Control
The voice is played from the PC’s sound card instead of the USB Video Phone when I make/answer a call?
Set “Audio In” and “Audio Out” to “USB Audio Device”.
Skype is running, but the icon of SkypeMate still show as
(the phone is green and the outside is grey)?
You have selected the wrong option, go to Skype, execute